qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v8 0/9] qemu-img: add measure sub-command


From: Max Reitz
Subject: Re: [Qemu-devel] [PATCH v8 0/9] qemu-img: add measure sub-command
Date: Fri, 30 Jun 2017 15:55:24 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.2.0

On 2017-06-14 17:35, Stefan Hajnoczi wrote:
> v8:
>  * Check 2P file size in qemu-iotests 178 [Berto]
>  * Use QCOW_MAX_L1_SIZE to check maximum virtual disk size [Berto]
> 
> v7:
>  * Check max file size with 7 exabytes [Berto]
>  * Really use UINT64_MAX everywhere instead of ~0ULL [Berto]
> 
> v6:
>  * Change bdrv_measure() return type to BlockMeasureInfo * [Eric]
>  * Clarify that holes in sparse POSIX files are still counted [Eric]
> 
> v5:
>  * Use UINT64_MAX instead of ~0ULL [Berto]
>  * Document qemu-img measure ofmt, fmt, output_fmt, and snapshot_param
>    [Berto]
> 
> v4:
>  * Make qcow2 refcount calculation conservative [Maor]
>  * Include actual qemu-img convert image size in test cases
> 
> v3:
>  * Drop RFC, this is ready to go for QEMU 2.10
>  * Use "required size" instead of "required bytes" in qemu-img output for
>    consistency [Nir]
>  * Clarify BlockMeasureInfo semantics [Max]
>  * Clarify bdrv_measure() opts argument and error handling [Nir]
>  * Handle -o backing_file= for qcow2 [Max]
>  * Handle snapshot options in qemu-img measure
>  * Probe input image for allocated data clusters for qcow2.  Didn't centralize
>    this because there are format-specific aspects such as the cluster_size.  
> It
>    may make sense to centralize it later (with a bit more complexity) if
>    support is added to more formats.
>  * Add qemu-img(1) man page section for 'measure' sub-command [Max]
>  * Extend test case to cover additional scenarios [Nir]
> 
> RFCv2:
>  * Publishing RFC again to discuss the new user-visible interfaces.  Code has
>    changed quite a bit, I have not kept any Reviewed-by tags.
>  * Rename qemu-img sub-command "measure" and API bdrv_measure() [Nir]
>  * Report both "required bytes" and "fully allocated bytes" to handle the 
> empty
>    image file and prealloc use cases [Nir and Dan]
>  * Use bdrv_getlength() instead of bdrv_nb_sectors() [Berto]
>  * Rename "err" label "out" in qemu-img-cmds.c [Nir]
>  * Add basic qcow2 support, doesn't support qemu-img convert from existing 
> files yet
> 
> RFCv1:
>  * Publishing patch series with just raw support, no qcow2 yet.  Please review
>    the command-line interface and let me know if you are happy with this
>    approach.
> 
> Users and management tools sometimes need to know the size required for a new
> disk image so that an LVM volume, SAN LUN, etc can be allocated ahead of time.
> Image formats like qcow2 have non-trivial metadata that makes it hard to
> estimate the exact size without knowledge of file format internals.
> 
> This patch series introduces a new qemu-img sub-command that calculates the
> required size for both image creation and conversion scenarios.
> 
> The conversion scenario is:
> 
>   $ qemu-img measure -f raw -O qcow2 input.img
>   required size: 1327680
>   fully allocated size: 1074069504
> 
> Here an existing image file is taken and the output includes the space 
> required
> for data from the input image file.
> 
> The creation scenario is:
> 
>   $ qemu-img measure -O qcow2 --size 5G
>   required size: 327680
>   fully allocated size: 1074069504
> 
> Stefan Hajnoczi (9):
>   block: add bdrv_measure() API
>   raw-format: add bdrv_measure() support
>   qcow2: extract preallocation calculation function
>   qcow2: make refcount size calculation conservative
>   qcow2: extract image creation option parsing
>   qcow2: add bdrv_measure() support
>   qemu-img: add measure subcommand
>   qemu-iotests: support per-format golden output files
>   iotests: add test 178 for qemu-img measure
> 
>  qapi/block-core.json             |  25 +++
>  include/block/block.h            |   2 +
>  include/block/block_int.h        |   2 +
>  block.c                          |  35 ++++
>  block/qcow2.c                    | 383 
> +++++++++++++++++++++++++++++----------
>  block/raw-format.c               |  26 +++
>  qemu-img.c                       | 234 ++++++++++++++++++++++++
>  qemu-img-cmds.hx                 |   6 +
>  qemu-img.texi                    |  30 +++
>  tests/qemu-iotests/178           | 170 +++++++++++++++++
>  tests/qemu-iotests/178.out.qcow2 | 286 +++++++++++++++++++++++++++++
>  tests/qemu-iotests/178.out.raw   | 158 ++++++++++++++++
>  tests/qemu-iotests/check         |   5 +
>  tests/qemu-iotests/group         |   1 +
>  14 files changed, 1268 insertions(+), 95 deletions(-)
>  create mode 100755 tests/qemu-iotests/178
>  create mode 100644 tests/qemu-iotests/178.out.qcow2
>  create mode 100644 tests/qemu-iotests/178.out.raw

The series looks good to me, but the output_fmt is a bit too weird to
take it. A follow-up patch would work, too, though.

Max

Attachment: signature.asc
Description: OpenPGP digital signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]