qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH V4 09/10] block/qcow2: add lzo compress format


From: Peter Lieven
Subject: [Qemu-devel] [PATCH V4 09/10] block/qcow2: add lzo compress format
Date: Thu, 20 Jul 2017 16:20:40 +0200

Signed-off-by: Peter Lieven <address@hidden>
---
 block/qcow2-cluster.c | 15 +++++++++++++++
 block/qcow2.c         | 42 +++++++++++++++++++++++++++++++++++-------
 configure             |  2 +-
 qapi/block-core.json  | 14 ++++++++++++--
 qemu-img.texi         |  1 +
 5 files changed, 64 insertions(+), 10 deletions(-)

diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 6c14d59..7d47dde 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -24,6 +24,9 @@
 
 #include "qemu/osdep.h"
 #include <zlib.h>
+#ifdef CONFIG_LZO
+#include <lzo/lzo1x.h>
+#endif
 
 #include "qapi/error.h"
 #include "qemu-common.h"
@@ -1504,6 +1507,18 @@ static int decompress_buffer(uint8_t *out_buf, int 
out_buf_size,
         inflateEnd(&z_strm);
         break;
     }
+#ifdef CONFIG_LZO
+    case QCOW2_COMPRESS_FORMAT_LZO:
+        out_len = out_buf_size;
+        ret = lzo1x_decompress_safe(buf, buf_size, out_buf,
+                                    (lzo_uint *) &out_len, NULL);
+        if (ret == LZO_E_INPUT_NOT_CONSUMED) {
+            /* We always read up to the next sector boundary. Thus
+             * buf_size may be larger than the original compressed size. */
+            ret = 0;
+        }
+        break;
+#endif
     default:
         abort(); /* should never reach this point */
     }
diff --git a/block/qcow2.c b/block/qcow2.c
index 57249cc..0ba5977 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -26,6 +26,9 @@
 #include "sysemu/block-backend.h"
 #include "qemu/module.h"
 #include <zlib.h>
+#ifdef CONFIG_LZO
+#include <lzo/lzo1x.h>
+#endif
 #include "block/qcow2.h"
 #include "qemu/error-report.h"
 #include "qapi/qmp/qerror.h"
@@ -165,10 +168,18 @@ static ssize_t qcow2_crypto_hdr_write_func(QCryptoBlock 
*block, size_t offset,
 }
 
 
-static void qcow2_compress_level_supported(int format, uint8_t level,
+static void qcow2_compress_settings_supported(int format, uint8_t level,
                                            Error **errp)
 {
-    if (format == QCOW2_COMPRESS_FORMAT_ZLIB && level > 9) {
+#ifndef CONFIG_LZO
+    if (format == QCOW2_COMPRESS_FORMAT_LZO) {
+        error_setg(errp, "ERROR: compress format '%s' is not supported",
+                         Qcow2CompressFormat_lookup[format]);
+        return;
+    }
+#endif
+    if ((format == QCOW2_COMPRESS_FORMAT_ZLIB && level > 9) ||
+        (format == QCOW2_COMPRESS_FORMAT_LZO && level > 0)) {
         error_setg(errp, "ERROR: compress level %" PRIu8 " is not"
                          " supported for format '%s'", level,
                          Qcow2CompressFormat_lookup[format]);
@@ -280,14 +291,22 @@ static int qcow2_read_extensions(BlockDriverState *bs, 
uint64_t start_offset,
                 return 4;
             }
 
-            qcow2_compress_level_supported(s->compress_format,
-                                           compress_ext.level, &local_err);
+            qcow2_compress_settings_supported(s->compress_format,
+                                              compress_ext.level, &local_err);
             if (local_err) {
                 error_propagate(errp, local_err);
                 return 5;
             }
             s->compress_level = compress_ext.level;
 
+#ifdef CONFIG_LZO
+            if (s->compress_format == QCOW2_COMPRESS_FORMAT_LZO &&
+                lzo_init() != LZO_E_OK) {
+                error_setg(errp, "ERROR: internal error - lzo_init() failed");
+                return 6;
+            }
+#endif
+
 #ifdef DEBUG_EXT
             printf("Qcow2: Got compress format %s with compress level %"
                    PRIu8 "\n", Qcow2CompressFormat_lookup[s->compress_format],
@@ -3078,8 +3097,8 @@ static int qcow2_create(const char *filename, QemuOpts 
*opts, Error **errp)
         visit_free(v);
         QDECREF(compressopts);
         QDECREF(options);
-        qcow2_compress_level_supported(compress.format, compress.level,
-                                       &local_err);
+        qcow2_compress_settings_supported(compress.format, compress.level,
+                                          &local_err);
         if (local_err) {
             error_propagate(errp, local_err);
             goto finish;
@@ -3394,7 +3413,7 @@ qcow2_co_pwritev_compressed(BlockDriverState *bs, 
uint64_t offset,
     z_stream z_strm = {};
     int z_windowBits = -15, z_level = Z_DEFAULT_COMPRESSION;
     int ret, out_len = 0;
-    uint8_t *buf, *out_buf = NULL, *local_buf = NULL;
+    uint8_t *buf, *out_buf = NULL, *local_buf = NULL, *work_buf = NULL;
     uint64_t cluster_offset;
 
     if (bytes == 0) {
@@ -3446,6 +3465,14 @@ qcow2_co_pwritev_compressed(BlockDriverState *bs, 
uint64_t offset,
 
         ret = ret != Z_STREAM_END;
         break;
+#ifdef CONFIG_LZO
+    case QCOW2_COMPRESS_FORMAT_LZO:
+        out_buf = g_malloc(s->cluster_size + s->cluster_size / 16 + 64 + 3);
+        work_buf = g_malloc(LZO1X_1_MEM_COMPRESS);
+        ret = lzo1x_1_compress(buf, s->cluster_size, out_buf,
+                               (lzo_uint *) &out_len, work_buf);
+        break;
+#endif
     default:
         abort(); /* should never reach this point */
     }
@@ -3491,6 +3518,7 @@ success:
 fail:
     qemu_vfree(local_buf);
     g_free(out_buf);
+    g_free(work_buf);
     return ret;
 }
 
diff --git a/configure b/configure
index befebe2..c28a45d 100755
--- a/configure
+++ b/configure
@@ -1982,7 +1982,7 @@ if test "$lzo" != "no" ; then
 int main(void) { lzo_version(); return 0; }
 EOF
     if compile_prog "" "-llzo2" ; then
-        libs_softmmu="$libs_softmmu -llzo2"
+        LIBS="$LIBS -llzo2"
         lzo="yes"
     else
         if test "$lzo" = "yes"; then
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 95e5393..9eb76df 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2456,11 +2456,12 @@
 ##
 # @Qcow2CompressFormat:
 # @zlib: standard zlib deflate compression
+# @lzo: lzo1x compression
 #
 # Since: 2.10
 ##
 { 'enum': 'Qcow2CompressFormat',
-  'data': [ 'zlib' ] }
+  'data': [ 'zlib', 'lzo' ] }
 
 ##
 # @Qcow2CompressZLib:
@@ -2471,6 +2472,14 @@
   'data': { } }
 
 ##
+# @Qcow2CompressLZO:
+#
+# Since: 2.10
+##
+{ 'struct': 'Qcow2CompressLZO',
+  'data': { } }
+
+##
 # @Qcow2Compress:
 #
 # Specifies the compression format and compression level that should
@@ -2488,7 +2497,8 @@
   'base': { 'format': 'Qcow2CompressFormat',
             '*level': 'uint8' },
   'discriminator': 'format',
-  'data': { 'zlib': 'Qcow2CompressZLib' } }
+  'data': { 'zlib': 'Qcow2CompressZLib',
+            'lzo': 'Qcow2CompressLZO' } }
 
 
 ##
diff --git a/qemu-img.texi b/qemu-img.texi
index fcc4c1d..17a17e5 100644
--- a/qemu-img.texi
+++ b/qemu-img.texi
@@ -682,6 +682,7 @@ The following options are available if support for the 
respective libraries
 has been enabled at compile time:
 
    zlib            Uses standard zlib compression
+   lzo             Uses LZO1X compression
 
 The compression algorithm can only be defined at image create time and cannot
 be changed later.
-- 
1.9.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]