qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 3/3] scsi-block: Support rerror/werror


From: Fam Zheng
Subject: [Qemu-devel] [PATCH v3 3/3] scsi-block: Support rerror/werror
Date: Fri, 18 Aug 2017 22:15:12 +0800

This makes the werror/rerror options available on the scsi-block device,
to allow user specify error handling policy similar to scsi-hd.

Signed-off-by: Fam Zheng <address@hidden>
---
 hw/scsi/scsi-disk.c | 54 +++++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 40 insertions(+), 14 deletions(-)

diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index 5f1e5e8070..ec7dbe4a2d 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -39,6 +39,7 @@ do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
 #include "hw/block/block.h"
 #include "sysemu/dma.h"
 #include "qemu/cutils.h"
+#include "scsi/scsi.h"
 
 #ifdef __linux
 #include <scsi/sg.h>
@@ -106,7 +107,7 @@ typedef struct SCSIDiskState
     bool tray_locked;
 } SCSIDiskState;
 
-static int scsi_handle_rw_error(SCSIDiskReq *r, int error, bool acct_failed);
+static bool scsi_handle_rw_error(SCSIDiskReq *r, int error, bool acct_failed);
 
 static void scsi_free_request(SCSIRequest *req)
 {
@@ -184,19 +185,10 @@ static bool scsi_disk_req_check_error(SCSIDiskReq *r, int 
ret, bool acct_failed)
         return true;
     }
 
-    if (ret < 0) {
+    if (ret < 0 || (r->status && *r->status)) {
         return scsi_handle_rw_error(r, -ret, acct_failed);
     }
 
-    if (r->status && *r->status) {
-        if (acct_failed) {
-            SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
-            block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
-        }
-        scsi_req_complete(&r->req, *r->status);
-        return true;
-    }
-
     return false;
 }
 
@@ -422,13 +414,13 @@ static void scsi_read_data(SCSIRequest *req)
 }
 
 /*
- * scsi_handle_rw_error has two return values.  0 means that the error
- * must be ignored, 1 means that the error has been processed and the
+ * scsi_handle_rw_error has two return values.  False means that the error
+ * must be ignored, true means that the error has been processed and the
  * caller should not do anything else for this request.  Note that
  * scsi_handle_rw_error always manages its reference counts, independent
  * of the return value.
  */
-static int scsi_handle_rw_error(SCSIDiskReq *r, int error, bool acct_failed)
+static bool scsi_handle_rw_error(SCSIDiskReq *r, int error, bool acct_failed)
 {
     bool is_read = (r->req.cmd.mode == SCSI_XFER_FROM_DEV);
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
@@ -440,6 +432,11 @@ static int scsi_handle_rw_error(SCSIDiskReq *r, int error, 
bool acct_failed)
             block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
         }
         switch (error) {
+        case 0:
+            /* The command has run, no need to fake sense.  */
+            assert(r->status && *r->status);
+            scsi_req_complete(&r->req, *r->status);
+            break;
         case ENOMEDIUM:
             scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
             break;
@@ -457,6 +454,34 @@ static int scsi_handle_rw_error(SCSIDiskReq *r, int error, 
bool acct_failed)
             break;
         }
     }
+    if (!error) {
+        int key, asc, ascq;
+        assert(r->status && *r->status);
+        switch (r->req.sense[0]) {
+        case 0x70: /* Fixed format sense data. */
+            key = r->req.sense[2] & 0xF;
+            asc = r->req.sense[12];
+            ascq = r->req.sense[13];
+            error = scsi_sense_to_errno(key, asc, ascq);
+            break;
+        case 0x72: /* Descriptor format sense data. */
+            key = r->req.sense[1] & 0xF;
+            asc = r->req.sense[2];
+            ascq = r->req.sense[3];
+            error = scsi_sense_to_errno(key, asc, ascq);
+            break;
+        default:
+            error = EIO;
+            break;
+        }
+
+        if (error == ECANCELED) {
+            /* Command aborted shouldn't stop the VM. */
+            scsi_req_complete(&r->req, *r->status);
+            return true;
+        }
+    }
+
     blk_error_action(s->qdev.conf.blk, action, is_read, error);
     if (action == BLOCK_ERROR_ACTION_STOP) {
         scsi_req_retry(&r->req);
@@ -2972,6 +2997,7 @@ static const TypeInfo scsi_cd_info = {
 
 #ifdef __linux__
 static Property scsi_block_properties[] = {
+    DEFINE_BLOCK_ERROR_PROPERTIES(SCSIDiskState, qdev.conf),         \
     DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.conf.blk),
     DEFINE_PROP_END_OF_LIST(),
 };
-- 
2.13.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]