Re: [Qemu-devel] [PATCH v7 0/4] Generic PCIE-PCI Bridge

[Marcel Apfelbaum]

On 18/08/2017 2:36, Aleksandr Bezzubikov wrote:
> This series introduces a new device - Generic PCI Express to PCI bridge,
> and also makes all necessary changes to enable hotplug of the bridge itself
> and any device into the bridge.

Hi,

Series
   Tested-by: Marcel Apfelbaum <address@hidden>
(focused on changes from v6)


Michael, will Alecsandr need to re-send it after freeze?
I am asking because the GSOC project is ending in a week or so.


Thanks,
Marcel

> Changes v6->v7:
> Change IO/MEM/PREF reservation properties type to SIZE.
>
> Changes v5->v6:
> 1. Fix indentation in the cap creation function (addresses Marcel's comment)
> 2. Simplify capability pref_mem_* fields assignment (addresses Marcel's comment)
> 3. Documentation fixes:
>         - fix mutually exclusive fields definition (addresses Laszlo's comment)
>         - fix pcie-pci-bridge usage example (addresses Marcel's comment)
>
> Changes v4->v5:
> 1. Change PCIE-PCI Bridge license (addresses Marcel's comment)
> 2. The capability layout changes (adress Laszlo' comments):
>      - separate pref_mem into pref_mem_32 and pref_mem_64 fields (SeaBIOS side 
> has the same changes)
>      - accordingly change the Generic Root Port's properties
> 3. Do not add the capability to the root port if no valid values are provided 
> (adresses Michael's comment)
> 4. Rename the capability type to 'RESOURCE_RESERVE' (addresses Marcel's comment)
> 5. Remove shpc_present check function (addresses Marcel's comment)
> 6. Fix the 4th patch message (adresses Michael's comment)
> 7. Patch for SHPC enabling in _OSC method has been already merged
>
> Changes v3->v4:
> 1. PCIE-PCI Bridge device: "msi_enable"->"msi", "shpc"->"shpc_bar", remove 
> local_err,
>     make "msi" property OnOffAuto, shpc_present() is still here
>     to avoid SHPC_VMSTATE refactoring (address Marcel's comments).
> 2. Change QEMU PCI capability layout (SeaBIOS side has the same changes):
>    - change reservation fields types: bus_res - uint32_t, others - uint64_t
>    - rename 'non_pref' and 'pref' fields
>    - interpret -1 value as 'ignore'
> 3. Use parent_realize in Generic PCI Express Root Port properly.
> 4. Fix documentation: fully replace the DMI-PCI bridge references with the new 
> PCIE-PCI bridge,
> "PCIE"->"PCI Express", small mistakes and typos - address Laszlo's and Marcel's 
> comments.
> 5. Rename QEMU PCI cap creation fucntion - addresses Marcel's comment.
>
> Changes v2->v3:
> (0). 'do_not_use' capability field flag is still _not_ in here since we haven't 
> come to consesus on it yet.
> 1. Merge commits 5 (bus_reserve property creation) and 6 (property usage) 
> together - addresses Michael's comment.
> 2. Add 'bus_reserve' property and QEMU PCI capability only to Generic PCIE Root 
> Port - addresses Michael's and Marcel's comments.
> 3. Change 'bus_reserve' property's default value to 0 - addresses Michael's 
> comment.
> 4. Rename QEMU bridge-specific PCI capability creation function - addresses 
> Michael's comment.
> 5. Init the whole QEMU PCI capability with zeroes - addresses Michael's and 
> Laszlo's comments.
> 6. Change QEMU PCI capability layout (SeaBIOS side has the same changes)
>    - add 'type' field to distinguish multiple
>      RedHat-specific capabilities - addresses Michael's comment
>    - do not mimiс PCI Config space register layout, but use mutually exclusive 
> differently
>      sized fields for IO and prefetchable memory limits - addresses Laszlo's 
> comment
> 7. Correct error handling in PCIE-PCI bridge realize function.
> 8. Replace a '2' constant with PCI_CAP_FLAGS in the capability creation 
> function - addresses Michael's comment.
> 9. Remove a comment on _OSC which isn't correct anymore - address Marcel's 
> comment.
> 10. Add documentation for the Generic PCIE-PCI Bridge and QEMU PCI capability - 
> addresses Michael's comment.
>
> Changes v1->v2:
> 1. Enable SHPC for the bridge.
> 2. Enable SHPC support for the Q35 machine (ACPI stuff).
> 3. Introduce PCI capability to help firmware on the system init.
>     This allows the bridge to be hotpluggable. Now it's supported
>     only for pcie-root-port. Now it's supposed to used with
>     SeaBIOS only, look at the SeaBIOS corresponding series
>     "Allow RedHat PCI bridges reserve more buses than necessary during init".
>
> Aleksandr Bezzubikov (4):
>    hw/pci: introduce pcie-pci-bridge device
>    hw/pci: introduce bridge-only vendor-specific capability to provide
>      some hints to firmware
>    hw/pci: add QEMU-specific PCI capability to the Generic PCI Express
>      Root Port
>    docs: update documentation considering PCIE-PCI bridge
>
>   docs/pcie.txt                      |  49 +++++-----
>   docs/pcie_pci_bridge.txt           | 114 ++++++++++++++++++++++
>   hw/pci-bridge/Makefile.objs        |   2 +-
>   hw/pci-bridge/gen_pcie_root_port.c |  36 +++++++
>   hw/pci-bridge/pcie_pci_bridge.c    | 192 +++++++++++++++++++++++++++++++++++++
>   hw/pci/pci_bridge.c                |  46 +++++++++
>   include/hw/pci/pci.h               |   1 +
>   include/hw/pci/pci_bridge.h        |  25 +++++
>   include/hw/pci/pcie_port.h         |   1 +
>   9 files changed, 442 insertions(+), 24 deletions(-)
>   create mode 100644 docs/pcie_pci_bridge.txt
>   create mode 100644 hw/pci-bridge/pcie_pci_bridge.c