On 08/28/2017 10:19 AM, Halil Pasic wrote:
On 08/28/2017 04:15 PM, Farhan Ali wrote:
On 08/28/2017 10:05 AM, Cornelia Huck wrote:
It's the alignment of the CCW which causes the problem.
The exact error message when starting the guest was:
! No virtio device found !
Since it worked for SCSI and CDL, and failed for LDL disks on that particular
system, we are not really sure what caused the failure.
Debugging it further showed the CCW for LDL disks were not aligned at double
word boundary.
This is really, really odd, as the low-level ccw code is the same for
any disk type...
Exactly!
Trying the test on a different system with LDL disks worked fine, with the
aligned(8) fix.
Do you happen to have an old s390-ccw.img laying around in the test folder?
QEMU might pick up
this one (e.g. when calling it without libvirt from the command line).
I explicitly mention the bios to use with '-bios' option and pick up the
latest bios. Without the aligned fix I see the error and with the fix it
works fine.
Wait, so the fix fixes it? Or am I confused now?
It fixes in my system and one other system we tried on. But fails on a system
where this issue was first noticed.
This is very confusing. So you have tried -bios on the system
where the issue was first noticed and the issue still persists
despite of the fixed bios is specified?
Yes.
The system where the issue was first noticed, applying the fix for the
bios, fixes for:
1) CDL disks
2) SCSI disks
But fails for LDL disk.
On my system and one other system, the fix works for all the disk types,
CDL, SCSI and LDL and fixes the issue.