[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [RFC v2 09/32] vhost-user: Add 'VHOST_USER_POSTCOPY_ADV
From: |
Marc-André Lureau |
Subject: |
Re: [Qemu-devel] [RFC v2 09/32] vhost-user: Add 'VHOST_USER_POSTCOPY_ADVISE' message |
Date: |
Wed, 30 Aug 2017 03:07:48 -0700 |
Hi
On Thu, Aug 24, 2017 at 12:27 PM, Dr. David Alan Gilbert (git)
<address@hidden> wrote:
> From: "Dr. David Alan Gilbert" <address@hidden>
>
> Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE
> message on an incoming advise.
>
> Later patches will fill in the behaviour/contents of the
> message.
>
> Signed-off-by: Dr. David Alan Gilbert <address@hidden>
> ---
> contrib/libvhost-user/libvhost-user.c | 21 ++++++++++++---
> contrib/libvhost-user/libvhost-user.h | 6 ++++-
> docs/interop/vhost-user.txt | 9 +++++++
> hw/virtio/vhost-user.c | 48
> +++++++++++++++++++++++++++++++++++
> migration/postcopy-ram.h | 1 +
> migration/savevm.c | 6 +++++
> 6 files changed, 86 insertions(+), 5 deletions(-)
>
> diff --git a/contrib/libvhost-user/libvhost-user.c
> b/contrib/libvhost-user/libvhost-user.c
> index 201b9846e9..8bbdf5fb40 100644
> --- a/contrib/libvhost-user/libvhost-user.c
> +++ b/contrib/libvhost-user/libvhost-user.c
> @@ -42,9 +42,6 @@ vu_request_to_string(int req)
> REQ(VHOST_USER_NONE),
> REQ(VHOST_USER_GET_FEATURES),
> REQ(VHOST_USER_SET_FEATURES),
> - REQ(VHOST_USER_NONE),
> - REQ(VHOST_USER_GET_FEATURES),
> - REQ(VHOST_USER_SET_FEATURES),
nice cleanup ;)
> REQ(VHOST_USER_SET_OWNER),
> REQ(VHOST_USER_RESET_OWNER),
> REQ(VHOST_USER_SET_MEM_TABLE),
> @@ -62,7 +59,10 @@ vu_request_to_string(int req)
> REQ(VHOST_USER_GET_QUEUE_NUM),
> REQ(VHOST_USER_SET_VRING_ENABLE),
> REQ(VHOST_USER_SEND_RARP),
> - REQ(VHOST_USER_INPUT_GET_CONFIG),
> + REQ(VHOST_USER_SET_SLAVE_REQ_FD),
> + REQ(VHOST_USER_IOTLB_MSG),
> + REQ(VHOST_USER_SET_VRING_ENDIAN),
> + REQ(VHOST_USER_POSTCOPY_ADVISE),
> REQ(VHOST_USER_MAX),
> };
> #undef REQ
> @@ -744,6 +744,17 @@ vu_set_vring_enable_exec(VuDev *dev, VhostUserMsg *vmsg)
> }
>
> static bool
> +vu_set_postcopy_advise(VuDev *dev, VhostUserMsg *vmsg)
> +{
> + /* TODO: Open ufd, pass it back in the request
> + * TODO: Add addresses
Extra EOL space
> + */
> + vmsg->payload.u64 = 0xcafe;
> + vmsg->size = sizeof(vmsg->payload.u64);
> + return true; /* = send a reply */
> +}
> +
> +static bool
> vu_process_message(VuDev *dev, VhostUserMsg *vmsg)
> {
> int do_reply = 0;
> @@ -808,6 +819,8 @@ vu_process_message(VuDev *dev, VhostUserMsg *vmsg)
> return vu_set_vring_enable_exec(dev, vmsg);
> case VHOST_USER_NONE:
> break;
> + case VHOST_USER_POSTCOPY_ADVISE:
> + return vu_set_postcopy_advise(dev, vmsg);
> default:
> vmsg_close_fds(vmsg);
> vu_panic(dev, "Unhandled request: %d", vmsg->request);
> diff --git a/contrib/libvhost-user/libvhost-user.h
> b/contrib/libvhost-user/libvhost-user.h
> index 95d0d34a28..3987ce643d 100644
> --- a/contrib/libvhost-user/libvhost-user.h
> +++ b/contrib/libvhost-user/libvhost-user.h
> @@ -62,7 +62,11 @@ typedef enum VhostUserRequest {
> VHOST_USER_GET_QUEUE_NUM = 17,
> VHOST_USER_SET_VRING_ENABLE = 18,
> VHOST_USER_SEND_RARP = 19,
> - VHOST_USER_INPUT_GET_CONFIG = 20,
> + VHOST_USER_NET_SET_MTU = 20,
> + VHOST_USER_SET_SLAVE_REQ_FD = 21,
> + VHOST_USER_IOTLB_MSG = 22,
> + VHOST_USER_SET_VRING_ENDIAN = 23,
> + VHOST_USER_POSTCOPY_ADVISE = 24,
> VHOST_USER_MAX
> } VhostUserRequest;
>
> diff --git a/docs/interop/vhost-user.txt b/docs/interop/vhost-user.txt
> index a279560eb0..dad2a1b343 100644
> --- a/docs/interop/vhost-user.txt
> +++ b/docs/interop/vhost-user.txt
> @@ -606,6 +606,15 @@ Master message types
> and expect this message once (per VQ) during device configuration
> (ie. before the master starts the VQ).
>
> + * VHOST_USER_POSTCOPY_ADVISE
> + Id: 24
> + Master payload: N/A
> + Slave payload: userfault fd + u64
> +
> + Master advises slave that a migration with postcopy enabled is
> underway,
> + the slave must open a userfaultfd for later use.
> + Note that at this stage the migration is still in precopy mode.
> +
> Slave message types
> -------------------
>
> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
> index c51bbd1296..7063e4df61 100644
> --- a/hw/virtio/vhost-user.c
> +++ b/hw/virtio/vhost-user.c
> @@ -67,6 +67,7 @@ typedef enum VhostUserRequest {
> VHOST_USER_SET_SLAVE_REQ_FD = 21,
> VHOST_USER_IOTLB_MSG = 22,
> VHOST_USER_SET_VRING_ENDIAN = 23,
> + VHOST_USER_POSTCOPY_ADVISE = 24,
> VHOST_USER_MAX
> } VhostUserRequest;
>
> @@ -724,6 +725,50 @@ out:
> return ret;
> }
>
> +/*
> + * Called at the start of an inbound postcopy on reception of the
> + * 'advise' command.
> + */
> +static int vhost_user_postcopy_advise(struct vhost_dev *dev, Error **errp)
> +{
> + struct vhost_user *u = dev->opaque;
> + CharBackend *chr = u->chr;
> + int ufd;
> + VhostUserMsg msg = {
> + .request = VHOST_USER_POSTCOPY_ADVISE,
> + .flags = VHOST_USER_VERSION,
> + };
> +
> + if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
> + error_setg(errp, "Failed to send postcopy_advise to vhost");
> + return -1;
> + }
> +
> + if (vhost_user_read(dev, &msg) < 0) {
> + error_setg(errp, "Failed to get postcopy_advise reply from vhost");
> + return -1;
> + }
> +
> + if (msg.request != VHOST_USER_POSTCOPY_ADVISE) {
> + error_setg(errp, "Unexpected msg type. Expected %d received %d",
> + VHOST_USER_POSTCOPY_ADVISE, msg.request);
> + return -1;
> + }
> +
> + if (msg.size != sizeof(msg.payload.u64)) {
> + error_setg(errp, "Received bad msg size.");
> + return -1;
> + }
> + ufd = qemu_chr_fe_get_msgfd(chr);
> + if (ufd < 0) {
> + error_setg(errp, "%s: Failed to get ufd", __func__);
> + return -1;
> + }
> +
> + /* TODO: register ufd with userfault thread */
> + return 0;
> +}
> +
> static int vhost_user_postcopy_notifier(NotifierWithReturn *notifier,
> void *opaque)
> {
> @@ -743,6 +788,9 @@ static int
> vhost_user_postcopy_notifier(NotifierWithReturn *notifier,
> }
> break;
>
> + case POSTCOPY_NOTIFY_INBOUND_ADVISE:
> + return vhost_user_postcopy_advise(dev, pnd->errp);
> +
> default:
> /* We ignore notifications we don't know */
> break;
> diff --git a/migration/postcopy-ram.h b/migration/postcopy-ram.h
> index d688411674..70d4b09659 100644
> --- a/migration/postcopy-ram.h
> +++ b/migration/postcopy-ram.h
> @@ -128,6 +128,7 @@ void postcopy_infrastructure_init(void);
> */
> enum PostcopyNotifyReason {
> POSTCOPY_NOTIFY_PROBE = 0,
> + POSTCOPY_NOTIFY_INBOUND_ADVISE,
> };
>
> struct PostcopyNotifyData {
> diff --git a/migration/savevm.c b/migration/savevm.c
> index fdd15fa0a7..d35911731d 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -1343,6 +1343,7 @@ static int
> loadvm_postcopy_handle_advise(MigrationIncomingState *mis)
> {
> PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_ADVISE);
> uint64_t remote_pagesize_summary, local_pagesize_summary, remote_tps;
> + Error *local_err = NULL;
>
> trace_loadvm_postcopy_handle_advise();
> if (ps != POSTCOPY_INCOMING_NONE) {
> @@ -1390,6 +1391,11 @@ static int
> loadvm_postcopy_handle_advise(MigrationIncomingState *mis)
> return -1;
> }
>
> + if (postcopy_notify(POSTCOPY_NOTIFY_INBOUND_ADVISE, &local_err)) {
> + error_report_err(local_err);
> + return -1;
> + }
> +
> if (ram_postcopy_incoming_init(mis)) {
> return -1;
> }
> --
> 2.13.5
>
>
Reviewed-by: Marc-André Lureau <address@hidden>
--
Marc-André Lureau
- Re: [Qemu-devel] [RFC v2 04/32] qemu_ram_block_host_offset, (continued)
- [Qemu-devel] [RFC v2 05/32] migration/ram: ramblock_recv_bitmap_test_byte_offset, Dr. David Alan Gilbert (git), 2017/08/24
- [Qemu-devel] [RFC v2 06/32] postcopy: use UFFDIO_ZEROPAGE only when available, Dr. David Alan Gilbert (git), 2017/08/24
- [Qemu-devel] [RFC v2 07/32] postcopy: Add notifier chain, Dr. David Alan Gilbert (git), 2017/08/24
- [Qemu-devel] [RFC v2 08/32] postcopy: Add vhost-user flag for postcopy and check it, Dr. David Alan Gilbert (git), 2017/08/24
- [Qemu-devel] [RFC v2 09/32] vhost-user: Add 'VHOST_USER_POSTCOPY_ADVISE' message, Dr. David Alan Gilbert (git), 2017/08/24
- Re: [Qemu-devel] [RFC v2 09/32] vhost-user: Add 'VHOST_USER_POSTCOPY_ADVISE' message,
Marc-André Lureau <=
- [Qemu-devel] [RFC v2 10/32] vhub: Support sending fds back to qemu, Dr. David Alan Gilbert (git), 2017/08/24
- [Qemu-devel] [RFC v2 11/32] vhub: Open userfaultfd, Dr. David Alan Gilbert (git), 2017/08/24
- [Qemu-devel] [RFC v2 12/32] postcopy: Allow registering of fd handler, Dr. David Alan Gilbert (git), 2017/08/24
- [Qemu-devel] [RFC v2 13/32] vhost+postcopy: Register shared ufd with postcopy, Dr. David Alan Gilbert (git), 2017/08/24
- [Qemu-devel] [RFC v2 14/32] vhost+postcopy: Transmit 'listen' to client, Dr. David Alan Gilbert (git), 2017/08/24
- [Qemu-devel] [RFC v2 15/32] vhost+postcopy: Register new regions with the ufd, Dr. David Alan Gilbert (git), 2017/08/24