[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-block] [PATCH v2 8/9] AHCI: pretty-print FIS to b
From: |
John Snow |
Subject: |
Re: [Qemu-devel] [Qemu-block] [PATCH v2 8/9] AHCI: pretty-print FIS to buffer instead of stderr |
Date: |
Wed, 30 Aug 2017 18:50:27 -0400 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.2.1 |
On 08/30/2017 05:17 AM, Stefan Hajnoczi wrote:
> On Tue, Aug 29, 2017 at 04:49:33PM -0400, John Snow wrote:
>> The current FIS printing routines dump the FIS to screen. adjust this
>> such that it dumps to buffer instead, then use this ability to have
>> FIS dump mechanisms via trace-events instead of compiled defines.
>>
>> Signed-off-by: John Snow <address@hidden>
>> ---
>> hw/ide/ahci.c | 54
>> +++++++++++++++++++++++++++++++++++++++++++----------
>> hw/ide/trace-events | 4 ++++
>> 2 files changed, 48 insertions(+), 10 deletions(-)
>>
>> diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
>> index a0a4dd6..2e75f9b 100644
>> --- a/hw/ide/ahci.c
>> +++ b/hw/ide/ahci.c
>> @@ -644,20 +644,45 @@ static void ahci_reset_port(AHCIState *s, int port)
>> ahci_init_d2h(d);
>> }
>>
>> -static void debug_print_fis(uint8_t *fis, int cmd_len)
>> +/* Buffer pretty output based on a raw FIS structure. */
>> +static void ahci_pretty_buffer_fis(uint8_t *fis, int cmd_len, char **out)
>
> Simplified function using GString:
>
> static char *ahci_pretty_buffer_fis(const uint8_t *fis, int cmd_len)
> {
> GString *s = g_string_new("FIS:");
> int i;
>
> for (i = 0; i < cmd_len; i++) {
> if (i % 16 == 0) {
> g_string_append_printf(s, "\n0x%02x:", i);
> }
>
> g_string_append_printf(s, " %02x", fis[i]);
> }
>
> g_string_append_c('\n');
> return g_string_free(s, FALSE);
> }
>
> It's less efficient due to extra mallocs but a lot easier to read.
>
eeeyyyyeahhhh I guess I don't need to be bleedingly efficient with debug
printfs...
And in this example I don't need to worry about the math being precisely
correct. I'll make the change :(
>> {
>> -#if DEBUG_AHCI
>> + size_t bufsize;
>> + char *pbuf;
>> + char *pptr;
>> + size_t lines = DIV_ROUND_UP(cmd_len, 16);
>> + const char *preamble = "FIS:";
>> int i;
>>
>> - fprintf(stderr, "fis:");
>> + /* Total amount of memory to store FISes in HBA memory */
>> + g_assert_cmpint(cmd_len, <=, 0x100);
>> + g_assert(out);
>> +
>> + /* Printed like:
>> + * FIS:\n
>> + * 0x00: 00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee \n
>> + * 0x10: ff \n
>> + * \0
>> + *
>> + * Four bytes for the preamble, seven for each line prefix (including a
>> + * newline to start a new line), three bytes for each source byte,
>> + * a trailing newline and a terminal null byte.
>> + */
>> +
>> + bufsize = strlen(preamble) + ((6 + 1) * lines) + (3 * cmd_len) + 1 + 1;
>> + pbuf = g_malloc(bufsize);
>> + pptr = pbuf;
>> + pptr += sprintf(pptr, "%s", preamble);
>> for (i = 0; i < cmd_len; i++) {
>> if ((i & 0xf) == 0) {
>> - fprintf(stderr, "\n%02x:",i);
>> + pptr += sprintf(pptr, "\n0x%02x: ", i);
>> }
>> - fprintf(stderr, "%02x ",fis[i]);
>> + pptr += sprintf(pptr, "%02x ", fis[i]);
>> }
>> - fprintf(stderr, "\n");
>> -#endif
>> + pptr += sprintf(pptr, "\n");
>> + pptr += 1; /* \0 */
>> + g_assert(pbuf + bufsize == pptr);
>> + *out = pbuf;
>> }
>>
>> static bool ahci_map_fis_address(AHCIDevice *ad)
>> @@ -1201,7 +1226,12 @@ static void handle_reg_h2d_fis(AHCIState *s, int port,
>> * table to ide_state->io_buffer */
>> if (opts & AHCI_CMD_ATAPI) {
>> memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD],
>> 0x10);
>> - debug_print_fis(ide_state->io_buffer, 0x10);
>> + if (TRACE_HANDLE_REG_H2D_FIS_DUMP_ENABLED) {
>
> This should probably be:
>
> if (trace_event_get_state_backends(TRACE_HANDLE_REG_H2D_FIS_DUMP)) {
>
> The difference is that TRACE_HANDLE_REG_H2D_FIS_DUMP_ENABLED is set at
> compile time while trace_event_get_state_backends() checks if the event
> is enabled at run-time.
>
> Therefore TRACE_HANDLE_REG_H2D_FIS_DUMP_ENABLED causes the trace event
> to fire even when the user hasn't enabled the trace event yet. That
> would be a waste of CPU.
>
Oh, cool! Nice tip!
>> + char *pretty_fis;
>> + ahci_pretty_buffer_fis(ide_state->io_buffer, 0x10, &pretty_fis);
>> + trace_handle_reg_h2d_fis_dump(s, port, pretty_fis);
>> + g_free(pretty_fis);
>> + }
>> s->dev[port].done_atapi_packet = false;
>> /* XXX send PIO setup FIS */
>> }
>> @@ -1256,8 +1286,12 @@ static int handle_cmd(AHCIState *s, int port, uint8_t
>> slot)
>> trace_handle_cmd_badmap(s, port, cmd_len);
>> goto out;
>> }
>> - debug_print_fis(cmd_fis, 0x80);
>> -
>> + if (TRACE_HANDLE_CMD_FIS_DUMP_ENABLED) {
>
> Same here.
>
Sure thing. There's probably a block in ATAPI that needs this treatment,
too.
>> + char *pretty_fis;
>> + ahci_pretty_buffer_fis(cmd_fis, 0x80, &pretty_fis);
>> + trace_handle_cmd_fis_dump(s, port, pretty_fis);
>> + g_free(pretty_fis);
>> + }
>> switch (cmd_fis[0]) {
>> case SATA_FIS_TYPE_REGISTER_H2D:
>> handle_reg_h2d_fis(s, port, slot, cmd_fis);
>> diff --git a/hw/ide/trace-events b/hw/ide/trace-events
>> index e15fd77..77ed3c1 100644
>> --- a/hw/ide/trace-events
>> +++ b/hw/ide/trace-events
>> @@ -105,3 +105,7 @@ ahci_cmd_done(void *s, int port) "ahci(%p)[%d]: cmd done"
>> ahci_reset(void *s) "ahci(%p): HBA reset"
>> allwinner_ahci_mem_read(void *s, void *a, uint64_t addr, uint64_t val,
>> unsigned size) "ahci(%p): read a=%p addr=0x%"HWADDR_PRIx" val=0x%"PRIx64",
>> size=%d"
>> allwinner_ahci_mem_write(void *s, void *a, uint64_t addr, uint64_t val,
>> unsigned size) "ahci(%p): write a=%p addr=0x%"HWADDR_PRIx" val=0x%"PRIx64",
>> size=%d"
>> +
>> +# Warning: Verbose
>> +handle_reg_h2d_fis_dump(void *s, int port, char *fis) "ahci(%p)[%d]: %s"
>
> const char *fis
>
>> +handle_cmd_fis_dump(void *s, int port, char *fis) "ahci(%p)[%d]: %s"
>
> const char *fis
>
Thanks for the 👀
- [Qemu-devel] [PATCH v2 3/9] IDE: add tracing for data ports, (continued)
- [Qemu-devel] [PATCH v2 3/9] IDE: add tracing for data ports, John Snow, 2017/08/29
- [Qemu-devel] [PATCH v2 1/9] IDE: replace DEBUG_IDE with tracing system, John Snow, 2017/08/29
- [Qemu-devel] [PATCH v2 2/9] IDE: Add register hints to tracing, John Snow, 2017/08/29
- [Qemu-devel] [PATCH v2 5/9] IDE: replace DEBUG_AIO with trace events, John Snow, 2017/08/29
- [Qemu-devel] [PATCH v2 4/9] ATAPI: Replace DEBUG_IDE_ATAPI with tracing events, John Snow, 2017/08/29
- [Qemu-devel] [PATCH v2 8/9] AHCI: pretty-print FIS to buffer instead of stderr, John Snow, 2017/08/29
- [Qemu-devel] [PATCH v2 6/9] AHCI: Replace DPRINTF with trace-events, John Snow, 2017/08/29
- [Qemu-devel] [PATCH v2 9/9] AHCI: remove DPRINTF macro, John Snow, 2017/08/29
- [Qemu-devel] [PATCH v2 7/9] AHCI: Rework IRQ constants, John Snow, 2017/08/29
- Re: [Qemu-devel] [PATCH v2 0/9] IDE: replace printfs with tracing, no-reply, 2017/08/29
- Re: [Qemu-devel] [Qemu-block] [PATCH v2 0/9] IDE: replace printfs with tracing, Stefan Hajnoczi, 2017/08/30