[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v11 2/6] qmp: Use ThrottleLimits structure
From: |
Greg Kurz |
Subject: |
Re: [Qemu-devel] [PATCH v11 2/6] qmp: Use ThrottleLimits structure |
Date: |
Thu, 14 Sep 2017 13:19:55 +0200 |
On Thu, 14 Sep 2017 06:40:06 -0400
Pradeep Jagadeesh <address@hidden> wrote:
> This patch factors out code to use the ThrottleLimits
> strurcture.
>
> Signed-off-by: Pradeep Jagadeesh <address@hidden>
> Reviewed-by: Greg Kurz <address@hidden>
> Reviewed-by: Eric Blake <address@hidden>
> Reviewed-by: Alberto Garcia <address@hidden>
> Reviewed-by: Markus Armbruster <address@hidden>
> ---
> qapi/block-core.json | 78
> +++-------------------------------------------------
Uhhh... what happened here ? Where did the lines go ? I've never reviewed this
patch before...
> 1 file changed, 4 insertions(+), 74 deletions(-)
>
> diff --git a/qapi/block-core.json b/qapi/block-core.json
> index bb11815..d0ccfda 100644
> --- a/qapi/block-core.json
> +++ b/qapi/block-core.json
> @@ -1826,84 +1826,13 @@
> #
> # @device: Block device name (deprecated, use @id instead)
> #
> -# @id: The name or QOM path of the guest device (since: 2.8)
> -#
> -# @bps: total throughput limit in bytes per second
> -#
> -# @bps_rd: read throughput limit in bytes per second
> -#
> -# @bps_wr: write throughput limit in bytes per second
> -#
> -# @iops: total I/O operations per second
> -#
> -# @iops_rd: read I/O operations per second
> -#
> -# @iops_wr: write I/O operations per second
> -#
> -# @bps_max: total throughput limit during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @bps_rd_max: read throughput limit during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @bps_wr_max: write throughput limit during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @iops_max: total I/O operations per second during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @iops_rd_max: read I/O operations per second during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @iops_wr_max: write I/O operations per second during bursts,
> -# in bytes (Since 1.7)
> -#
> -# @bps_max_length: maximum length of the @bps_max burst
> -# period, in seconds. It must only
> -# be set if @bps_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @bps_rd_max_length: maximum length of the @bps_rd_max
> -# burst period, in seconds. It must only
> -# be set if @bps_rd_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @bps_wr_max_length: maximum length of the @bps_wr_max
> -# burst period, in seconds. It must only
> -# be set if @bps_wr_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @iops_max_length: maximum length of the @iops burst
> -# period, in seconds. It must only
> -# be set if @iops_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @iops_rd_max_length: maximum length of the @iops_rd_max
> -# burst period, in seconds. It must only
> -# be set if @iops_rd_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @iops_wr_max_length: maximum length of the @iops_wr_max
> -# burst period, in seconds. It must only
> -# be set if @iops_wr_max is set as well.
> -# Defaults to 1. (Since 2.6)
> -#
> -# @iops_size: an I/O size in bytes (Since 1.7)
> -#
> # @group: throttle group name (Since 2.4)
> #
> # Since: 1.1
> ##
> { 'struct': 'BlockIOThrottle',
> - 'data': { '*device': 'str', '*id': 'str', 'bps': 'int', 'bps_rd': 'int',
> - 'bps_wr': 'int', 'iops': 'int', 'iops_rd': 'int', 'iops_wr':
> 'int',
> - '*bps_max': 'int', '*bps_rd_max': 'int',
> - '*bps_wr_max': 'int', '*iops_max': 'int',
> - '*iops_rd_max': 'int', '*iops_wr_max': 'int',
> - '*bps_max_length': 'int', '*bps_rd_max_length': 'int',
> - '*bps_wr_max_length': 'int', '*iops_max_length': 'int',
> - '*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int',
> - '*iops_size': 'int', '*group': 'str' } }
> + 'base': 'ThrottleLimits',
> + 'data': { '*device': 'str', '*group': 'str' } }
>
> ##
> # @ThrottleLimits:
> @@ -1913,6 +1842,7 @@
> # transaction. All fields are optional. When setting limits, if a field is
> # missing the current value is not changed.
> #
> +# @id: device id
> # @iops-total: limit total I/O operations per second
> # @iops-total-max: I/O operations burst
> # @iops-total-max-length: length of the iops-total-max burst period, in
> seconds
> @@ -1942,7 +1872,7 @@
> # Since: 2.11
> ##
> { 'struct': 'ThrottleLimits',
> - 'data': { '*iops-total' : 'int', '*iops-total-max' : 'int',
> + 'data': { '*id' : 'str', '*iops-total' : 'int', '*iops-total-max' : 'int',
> '*iops-total-max-length' : 'int', '*iops-read' : 'int',
> '*iops-read-max' : 'int', '*iops-read-max-length' : 'int',
> '*iops-write' : 'int', '*iops-write-max' : 'int',
pgpcJOJ5jz75a.pgp
Description: OpenPGP digital signature