qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v2] hw/pci-bridge/pcie_pci_bridge: properly handle M


From: Aleksandr Bezzubikov
Subject: [Qemu-devel] [PATCH v2] hw/pci-bridge/pcie_pci_bridge: properly handle MSI unavailability case
Date: Mon, 25 Sep 2017 02:21:58 +0300

QEMU with the pcie-pci-bridge device crashes if the guest board doesn't support 
MSI,
e.g. 'qemu-system-ppc64 -M prep -device pcie-pci-bridge'.
This is caused by wrong pcie-pci-bridge instantiation error handling. This 
patch fixes this issue
by falling back to legacy INTx if MSI is not available.
Also set the bridge's 'msi' property default value to 'auto' in order to 
trigger errors 
only when user explicitly set msi=on.

v2:
rewrite the commit message

Reported-by: Eduardo Habkost <address@hidden>
Signed-off-by: Aleksandr Bezzubikov <address@hidden>
Reviewed-by: Marcel Apfelbaum <address@hidden>
---
 hw/pci-bridge/pcie_pci_bridge.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/hw/pci-bridge/pcie_pci_bridge.c b/hw/pci-bridge/pcie_pci_bridge.c
index 9aa5cc3..da562fe 100644
--- a/hw/pci-bridge/pcie_pci_bridge.c
+++ b/hw/pci-bridge/pcie_pci_bridge.c
@@ -65,10 +65,18 @@ static void pcie_pci_bridge_realize(PCIDevice *d, Error 
**errp)
         goto aer_error;
     }
 
+    Error *local_err = NULL;
     if (pcie_br->msi != ON_OFF_AUTO_OFF) {
-        rc = msi_init(d, 0, 1, true, true, errp);
+        rc = msi_init(d, 0, 1, true, true, &local_err);
         if (rc < 0) {
-            goto msi_error;
+            assert(rc == -ENOTSUP);
+            if (pcie_br->msi != ON_OFF_AUTO_ON) {
+                error_free(local_err);
+            } else {
+                /* failed to satisfy user's explicit request for MSI */
+                error_propagate(errp, local_err);
+                goto msi_error;
+            }
         }
     }
     pci_register_bar(d, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
@@ -81,7 +89,7 @@ aer_error:
 pm_error:
     pcie_cap_exit(d);
 cap_error:
-    shpc_free(d);
+    shpc_cleanup(d, &pcie_br->shpc_bar);
 error:
     pci_bridge_exitfn(d);
 }
@@ -98,7 +106,9 @@ static void pcie_pci_bridge_reset(DeviceState *qdev)
 {
     PCIDevice *d = PCI_DEVICE(qdev);
     pci_bridge_reset(qdev);
-    msi_reset(d);
+    if (msi_present(d)) {
+        msi_reset(d);
+    }
     shpc_reset(d);
 }
 
@@ -106,12 +116,14 @@ static void pcie_pci_bridge_write_config(PCIDevice *d,
         uint32_t address, uint32_t val, int len)
 {
     pci_bridge_write_config(d, address, val, len);
-    msi_write_config(d, address, val, len);
+    if (msi_present(d)) {
+        msi_write_config(d, address, val, len);
+    }
     shpc_cap_write_config(d, address, val, len);
 }
 
 static Property pcie_pci_bridge_dev_properties[] = {
-        DEFINE_PROP_ON_OFF_AUTO("msi", PCIEPCIBridge, msi, ON_OFF_AUTO_ON),
+        DEFINE_PROP_ON_OFF_AUTO("msi", PCIEPCIBridge, msi, ON_OFF_AUTO_AUTO),
         DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
2.7.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]