Re: [Qemu-devel] [PATCH 5/5] s390x/ccs: add ccw-tester emulated device

[Dong Jia Shi]

* Cornelia Huck <address@hidden> [2017-09-21 10:54:02 +0200]:

> On Thu, 21 Sep 2017 16:45:47 +0800
> Dong Jia Shi <address@hidden> wrote:
> 
> > * Cornelia Huck <address@hidden> [2017-09-07 10:08:17 +0200]:
> > 
> > [...]
> > 
> > > > I'm thinking of a method these days:
> > > > Could passing through an fully emulated ccw device (e.g. 3270), or a
> > > > virtio ccw device, in the level 1 kvm guest to a level 2 guest be a test
> > > > method for this?
> > > > 
> > > > All of the CCWs will be translated to IDAL CCWs by vfio-ccw in the level
> > > > 1 guest (which is the level 2 kvm host) and issued to the level 1 kvm
> > > > host. So, those IDALs will eventually be handled by the emulated device,
> > > > or the virtio ccw device, on the level 1 kvm host...
> > > > 
> > > > Some days ago, one of my colleague tried the emulated 3270 passing
> > > > through. She stucked with the problem that the level 1 kvm host handling
> > > > a senseid IDAL ccw as a Direct ccw.
> > > > 
> > > > Maybe I could try to pass through a virtio ccw device. I don't think of
> > > > any obvious problem that would lead to fail. Any comment?
> > > >   
> > > 
> > > That actually looks like a good thing to try! Cool idea.
> > >   
> > 
> > Tried to test with the following method:
> > 1. Start g1 (first level guest on kvm a host) with a virtio blk device
> >    defined:
> > -drive 
> > file=/dev/disk/by-path/ccw-0.0.3f3e,if=none,id=drive-virtio-disk1,format=raw
> >  \
> > -device 
> > virtio-blk-ccw,devno=fe.0.2222,scsi=off,drive=drive-virtio-disk1,id=virtio-disk1
> >  \
> > 2. Login g1, and bind the subchannel of ccw device 0.0.2222 with
> >    vfio-ccw drvier.
> > 3. Create a mdev on the above subchannel.
> > 4. Passthrough the mdev to g2, and try to start g2.
> > 
> > The 4th step failed with the following message and hang:
> > qemu-system-s390x: vfio-ccw: wirte I/O region: errno=4
> > (BTW, 4 is EINTR.)
> > 
> > I roughly guess this might be caused by:
> > On the kvm host, virtio callback injects the I/O interrupt in a
> > synchronzing manner. And this causes g1's I/O interrupt handler getting
> > the interrupt and then signaling the Qemu instance on g1 with the I/O
> > result, even before return of the pwrite().
> > 
> > But, using gdb on the kvm host, I do see several ssch successfully
> > executed. I will dig the root reason, and see if there is some way to
> > fix the issue.
> 
> Hm... would that be the ccws used for setting up a virtio device, and
> the problems start once adapter interrupts become active?
After a debugging, when starting g2, I got the following ccw sequence:
1. CCW_CMD_SENSE_ID             0xe4 [OK]
2. CCW_CMD_NOOP                 0x03 [OK]
3. CCW_CMD_SET_VIRTIO_REV       0x83 [OK]
4. CCW_CMD_VDEV_RESET           0x33 [FAILED]

So this is still in the phase of setting up the device.

> Does it work if you modify the nested guest to use the old
> per-subchannel indicators mechanism?
It turns out the root reason for the pwrite failure is caused by a bug
in the vfio-ccw driver:
drivers/s390/cio/vfio_ccw_cp.c: ccwchain_fetch_direct()
    calls pfn_array_alloc_pin() with a zero @len parameter.
So it results in a -EINVAL return.

The current code assumes that a valid direct ccw always has its count
value not equal to zero. However this is not true at least for the
CCW_CMD_VDEV_RESET (0x33) command:
(gdb) p/x ccw
 $5 = {cmd_code = 0x33, flags = 0x4, count = 0x0, cda = 0x0}

With a temp fix on this problem, more ccws (e.g. 0x11, 0x12, 0x31, 0x72
...) could be translated and executed well. But finnaly the qemu process
on g1 got a segmentation fault:
User process fault: interruption code 0238 ilc:3 in 
libpthread-2.24.so[3ff84f80000+1b000]
Failing address: 000ce330b0b00000 TEID: 000ce330b0b00800
Fault in primary space mode while using user ASCE.
AS:000000003b6cc1c7 R3:0000000000000024 
Segmentation fault

dmesg on g1:
[   18.160413] User process fault: interruption code 0238 ilc:3 in 
libpthread-2.24.so[3ff84f80000+1b000]
[   18.160462] Failing address: 000ce330b0b00000 TEID: 000ce330b0b00800
[   18.160463] Fault in primary space mode while using user ASCE.
[   18.160470] AS:000000003b6cc1c7 R3:0000000000000024 
[   18.160476] CPU: 1 PID: 2095 Comm: qemu-system-s39 Not tainted 
4.13.0-01250-g6baa298-dirty #58
[   18.160477] Hardware name: IBM 2964 NC9 704 (KVM/Linux)
[   18.160479] task: 0000000038ac8000 task.stack: 0000000038e4c000
[   18.160480] User PSW : 0705200180000000 000003ff84f93b8a
[   18.160483]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:1 AS:0 CC:2 PM:0 
RI:0 EA:3
[   18.160486] User GPRS: 0000000000000001 000003ff00000003 0000000104be86b0 
0000000104be86c6
[   18.160487]            0000000000000000 0000000100000001 00000001049efb22 
000003ffc5dfe13f
[   18.160489]            000003ff643fee60 0000000000000000 000003ffc5dfe258 
000003ff643fe8c8
[   18.160490]            000003ff855a5000 00000001049cc320 000003ff643fe888 
000003ff643fe7e8
[   18.160503] User Code: 000003ff84f93b7a: c0e5ffffe7cb        brasl 
%r14,3ff84f90b10
                          000003ff84f93b80: a7f4ffc4            brc 
15,3ff84f93b08
                         #000003ff84f93b84: e5600000ff0c        tbegin 0,65292
                         >000003ff84f93b8a: b2220050            ipm >%r5
                          000003ff84f93b8e: 8850001c            srl %r5,28
                          000003ff84f93b92: a774001c            brc 
7,3ff84f93bca
                          000003ff84f93b96: e30020000012        lt %r0,0(%r2)
                          000003ff84f93b9c: a784ffb6            brc 
8,3ff84f93b08
[   18.160520] Last Breaking-Event-Address:
[   18.160524]  [<00000001046404e6>] 0x1046404e6

The above fault is not caused by vfio-ccw directly I think. So now I
need to install gdb stuff on g1, and continuing debugging. But ideas on
this are welcomed. ;)

> 
> (I'm also wondering how diag is handled?)
Not looking into this yet. :-/

> 

-- 
Dong Jia Shi