[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-arm] [PATCH v4 0/5] virtio-iommu: VFIO integratio
From: |
Auger Eric |
Subject: |
Re: [Qemu-devel] [Qemu-arm] [PATCH v4 0/5] virtio-iommu: VFIO integration |
Date: |
Wed, 27 Sep 2017 11:24:01 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.4.0 |
Hi Linu,
On 27/09/2017 11:21, Linu Cherian wrote:
> On Wed Sep 27, 2017 at 10:55:07AM +0200, Auger Eric wrote:
>> Hi Linu,
>>
>> On 27/09/2017 10:30, Bharat Bhushan wrote:
>>> Hi,
>>>
>>>> -----Original Message-----
>>>> From: Linu Cherian [mailto:address@hidden
>>>> Sent: Wednesday, September 27, 2017 1:11 PM
>>>> To: Bharat Bhushan <address@hidden>
>>>> Cc: address@hidden; address@hidden;
>>>> address@hidden; address@hidden; address@hidden;
>>>> address@hidden; address@hidden; address@hidden;
>>>> address@hidden; address@hidden; address@hidden;
>>>> address@hidden; address@hidden; address@hidden;
>>>> address@hidden
>>>> Subject: Re: [Qemu-arm] [PATCH v4 0/5] virtio-iommu: VFIO integration
>>>>
>>>> Hi,
>>>>
>>>> On Wed Sep 27, 2017 at 12:03:15PM +0530, Bharat Bhushan wrote:
>>>>> This patch series integrates VFIO/VHOST with virtio-iommu.
>>>>>
>>>>> This version is mainly about rebasing on v4 version on virtio-iommu
>>>>> device framework from Eric Augur and addresing review comments.
>>>>>
>>>>> This patch series allows PCI pass-through using virtio-iommu.
>>>>>
>>>>> This series is based on:
>>>>> - virtio-iommu kernel driver by Jean-Philippe Brucker
>>>>> [1] [RFC] virtio-iommu version 0.4
>>>>> git://linux-arm.org/virtio-iommu.git branch viommu/v0.4
>>
>> Just to make sure, do you use the v0.4 virtio-iommu driver from above
>> branch?
>>
>> Thanks
>
> I am using git://linux-arm.org/linux-jpb.git branch virtio-iommu/v0.4.
> Hope you are referring to the same.
Yes that's the right one. I will also investigate on my side this afternoon.
Thanks
Eric
>
>
>>
>> Eric
>>>>>
>>>>> - virtio-iommu device emulation by Eric Augur.
>>>>> [RFC v4 00/16] VIRTIO-IOMMU device
>>>>> https://github.com/eauger/qemu/tree/v2.10.0-virtio-iommu-v4
>>>>>
>>>>> Changes are available at : https://github.com/bharaty/qemu.git
>>>>> virtio-iommu-vfio-integration-v4
>>>>>
>>>>
>>>> # With the above sources, was trying to test the vfio-pci device assigned
>>>> to
>>>> guest using Qemu.
>>>> # Both guest and host kernels are configured with 4k as page size.
>>>> # releavant qemu command snippet,
>>>> -device virtio-iommu-device -device virtio-blk-device,drive=hd0 \
>>>> -net none -device vfio-pci,host=xxx
>>>>
>>>>
>>>> On guest booting, observed mutliple messages as below,
>>>>
>>>> qemu-system-aarch64: iommu has granularity incompatible with target AS
>>>>
>>>> # On adding necessary prints, 0x5000 is len, 0x4fff is address mask
>>>> and the code expects the address mask to be 0xfff.
>>>
>>> I have not seen these errors, I am also using 4K page-size on both host and
>>> guest. Can you share compete qemu command and log.
>>>
>>> Thanks
>>> -Bharat
>>>
>>>>
>>>> if (len & iotlb->addr_mask) {
>>>> error_report
>>>>
>>>> # vfio_dma_map is failing due to this error.
>>>>
>>>> Any pointers ?
>>>>
>>>>
>>>>> v3->v4:
>>>>> - Rebase to v4 version from Eric
>>>>> - Fixes from Eric with DPDK in VM
>>>>> - Logical division in multiple patches
>>>>>
>>>>> v2->v3:
>>>>> - This series is based on "[RFC v3 0/8] VIRTIO-IOMMU device"
>>>>> Which is based on top of v2.10-rc0 that
>>>>> - Fixed issue with two PCI devices
>>>>> - Addressed review comments
>>>>>
>>>>> v1->v2:
>>>>> - Added trace events
>>>>> - removed vSMMU3 link in patch description
>>>>>
>>>>> Bharat Bhushan (5):
>>>>> target/arm/kvm: Translate the MSI doorbell in
>>>> kvm_arch_fixup_msi_route
>>>>> virtio-iommu: Add iommu notifier for map/unmap
>>>>> virtio-iommu: Call iommu notifier for attach/detach
>>>>> virtio-iommu: add iommu replay
>>>>> virtio-iommu: add iommu notifier memory-region
>>>>>
>>>>> hw/virtio/trace-events | 5 ++
>>>>> hw/virtio/virtio-iommu.c | 181
>>>> ++++++++++++++++++++++++++++++++++++++-
>>>>> include/hw/virtio/virtio-iommu.h | 6 ++
>>>>> target/arm/kvm.c | 27 ++++++
>>>>> target/arm/trace-events | 3 +
>>>>> 5 files changed, 219 insertions(+), 3 deletions(-)
>>>>>
>>>>> --
>>>>> 1.9.3
>>>>>
>>>>>
>>>>
>>>> --
>>>> Linu cherian
>
- [Qemu-devel] [PATCH v4 3/5] virtio-iommu: Call iommu notifier for attach/detach, (continued)
- [Qemu-devel] [PATCH v4 3/5] virtio-iommu: Call iommu notifier for attach/detach, Bharat Bhushan, 2017/09/27
- [Qemu-devel] [PATCH v4 5/5] virtio-iommu: add iommu notifier memory-region, Bharat Bhushan, 2017/09/27
- Re: [Qemu-devel] [PATCH v4 0/5] virtio-iommu: VFIO integration, Bharat Bhushan, 2017/09/27
- Re: [Qemu-devel] [Qemu-arm] [PATCH v4 0/5] virtio-iommu: VFIO integration, Linu Cherian, 2017/09/27
- Re: [Qemu-devel] [Qemu-arm] [PATCH v4 0/5] virtio-iommu: VFIO integration, Linu Cherian, 2017/09/27