[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches
From: |
Daniel P. Berrange |
Subject: |
Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches |
Date: |
Thu, 12 Oct 2017 09:24:56 +0100 |
User-agent: |
Mutt/1.9.0 (2017-09-02) |
On Wed, Oct 11, 2017 at 05:45:04PM +0100, Peter Maydell wrote:
> On 11 October 2017 at 16:49, Daniel P. Berrange <address@hidden> wrote:
> > On Wed, Oct 11, 2017 at 03:37:08PM +0100, Peter Maydell wrote:
> >> Build failures:
> >>
> >> NetBSD:
> >> CC ui/input-keymap.o
> >> /root/qemu/ui/input-keymap.c:8:44: fatal error:
> >> ui/input-keymap-linux-to-qcode.c: No such file or directory
> >> #include "ui/input-keymap-linux-to-qcode.c"
> >> ^
> >>
> >> FreeBSD:
> >>
> >>
> >> CC ui/input-keymap.o
> >> /root/qemu/ui/input-keymap.c:8:10: fatal error:
> >> 'ui/input-keymap-linux-to-qcode.c' file not found
> >> #include "ui/input-keymap-linux-to-qcode.c"
> >> ^
> >
> > So something is still racing in these two.
> >
> > I don't suppose you have the full log - interested if it
> > ever run the "GIT ui/keycodemapdb dtc" rule and/or
> > re-ran configure earlier, or if this is literally all it
> > did ?
>
> For NetBSD we have:
> From git://git.linaro.org/people/pmaydell/qemu-arm
> bac9608320..54070377a3 staging -> pmaydell/staging
> gmake: Entering directory '/root/qemu/build/all'
> sh: ./scripts/git-submodule.sh: not found
> gmake: Leaving directory '/root/qemu/build/all'
> gmake: Entering directory '/root/qemu/build/all'
> config-host.mak is out-of-date, running configure
> Install prefix /usr/local
> BIOS directory /usr/local/share/qemu
> firmware path /usr/local/share/qemu-firmware
> binary directory /usr/local/bin
> library directory /usr/local/lib
> module directory /usr/local/lib/qemu
> libexec directory /usr/local/libexec
> include directory /usr/local/include
> config directory /usr/local/etc
> local state directory /usr/local/var
> Manual directory /usr/local/share/man
> ELF interp prefix /usr/gnemul/qemu-%M
> Source path /root/qemu
> GIT submodules ui/keycodemapdb dtc
> C compiler cc
> Host C compiler cc
> C++ compiler c++
> [...]
> jemalloc support no
> avx2 optimization yes
> replication support yes
> VxHS block device no
> gmake: Leaving directory '/root/qemu/build/all'
> gmake: Entering directory '/root/qemu/build/all'
> GEN ui/input-keymap-linux-to-qcode.c
> gmake: Leaving directory '/root/qemu/build/all'
> gmake: Entering directory '/root/qemu/build/all'
> [...]
> gmake: Leaving directory '/root/qemu/build/all'
> gmake: Entering directory '/root/qemu/build/all'
> CC ui/input-keymap.o
> /root/qemu/ui/input-keymap.c:8:44: fatal error:
> ui/input-keymap-linux-to-qcode.c: No such file or directory
>
>
> I didn't notice the 'git-submodule.sh not found' issue before:
> looks like that's the same /bin/bash problem as OpenBSD,
> maybe, plus something not noticing the failure?
Yeah looks the same. I'll investigate the error status checking
I'll assume FreeBSD also hit the bash problem.
>
> >> AArch32 Linux:
> >>
> >> make: Entering directory '/home/peter.maydell/qemu/build/all-a32'
> >> config-host.mak is out-of-date, running configure
> >> Install prefix /usr/local
> >> BIOS directory /usr/local/share/qemu
> >> [...]
> >> VxHS block device no
> >> GEN config-host.h
> >> GEN module_block.h
> >> GEN ui/input-keymap-linux-to-qcode.c
> >> GEN ui/input-keymap-qcode-to-qnum.c
> >> GEN ui/input-keymap-qnum-to-qcode.c
> >> GIT ui/keycodemapdb dtc
> >> GEN trace/generated-tcg-tracers.h
> >> GEN trace/generated-helpers-wrappers.h
> >> GEN trace/generated-helpers.h
> >> GEN trace/generated-helpers.c
> >> Makefile:30: recipe for target 'git-submodule-update' failed
> >
> > Damn, we should not throw away stderr in scripts/git-submodule.sh,
> > as its hides whatever error occurred for you here.
>
> I edited out the stdout/stderr throwaway on the git submodule command:
>
> $ ./scripts/git-submodule.sh update ui/keycodemapdb dtc
> Cloning into 'ui/keycodemapdb'...
> fatal: unable to access
> 'https://gitlab.com/keycodemap/keycodemapdb.git/': Problem with the
> SSL CA cert (path? access rights?)
> fatal: clone of 'https://gitlab.com/keycodemap/keycodemapdb.git' into
> submodule path 'ui/keycodemapdb' failed
I'm not sure what I can do about this one - if GIT can't checkout
a normal git repo, this looks like a OS distro / setup bug on the
build host.
Regards,
Daniel
--
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org -o- https://fstop138.berrange.com :|
|: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
- [Qemu-devel] [PULL 10/10] ui/gtk: Fix deprecation of vte_terminal_copy_clipboard, (continued)
- [Qemu-devel] [PULL 10/10] ui/gtk: Fix deprecation of vte_terminal_copy_clipboard, Gerd Hoffmann, 2017/10/11
- [Qemu-devel] [PULL 06/10] ui: don't export qemu_input_event_new_key, Gerd Hoffmann, 2017/10/11
- [Qemu-devel] [PULL 04/10] ui: convert common input code to keycodemapdb, Gerd Hoffmann, 2017/10/11
- [Qemu-devel] [PULL 02/10] docker: don't rely on submodules existing in the main checkout, Gerd Hoffmann, 2017/10/11
- [Qemu-devel] [PULL 01/10] build: automatically handle GIT submodule checkout for dtc, Gerd Hoffmann, 2017/10/11
- [Qemu-devel] [PULL 07/10] tools: add qemu-keymap, Gerd Hoffmann, 2017/10/11
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Peter Maydell, 2017/10/11
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Kamil Rytarowski, 2017/10/11
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Daniel P. Berrange, 2017/10/11
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Peter Maydell, 2017/10/11
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches,
Daniel P. Berrange <=
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Peter Maydell, 2017/10/12
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Gerd Hoffmann, 2017/10/12
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Daniel P. Berrange, 2017/10/12
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Gerd Hoffmann, 2017/10/12
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Daniel P. Berrange, 2017/10/12
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Peter Maydell, 2017/10/12
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Gerd Hoffmann, 2017/10/12
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Daniel P. Berrange, 2017/10/12
- Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Peter Maydell, 2017/10/12
Re: [Qemu-devel] [PULL 00/10] Ui 20171011 patches, Gerd Hoffmann, 2017/10/12