[Qemu-devel] [PATCH v3 2/2] Add new PCI ID for i82559a

[Mike Nawrocki]

Adds a new PCI ID for the i82559a (0x8086 0x1030) interface. The
"x-use-alt-device-id" property controls whether this new ID is to be
used, and is true by default, and set to false in a compat entry.

Signed-off-by: Mike Nawrocki <address@hidden>
---
 hw/net/eepro100.c    | 13 +++++++++++++
 include/hw/compat.h  |  4 ++++
 include/hw/pci/pci.h |  1 +
 qemu-options.hx      |  2 +-
 4 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/hw/net/eepro100.c b/hw/net/eepro100.c
index 91dd058010..a63ed2ca3b 100644
--- a/hw/net/eepro100.c
+++ b/hw/net/eepro100.c
@@ -132,6 +132,7 @@ typedef struct {
     const char *name;
     const char *desc;
     uint16_t device_id;
+    uint16_t alt_device_id;
     uint8_t revision;
     uint16_t subsystem_vendor_id;
     uint16_t subsystem_id;
@@ -276,6 +277,7 @@ typedef struct {
     /* Quasi static device properties (no need to save them). */
     uint16_t stats_size;
     bool has_extended_tcb_support;
+    bool use_alt_device_id;
 } EEPRO100State;
 
 /* Word indices in EEPROM. */
@@ -1855,6 +1857,14 @@ static void e100_nic_realize(PCIDevice *pci_dev, Error 
**errp)
 
     TRACE(OTHER, logout("\n"));
 
+    /* By default, the i82559a adapter uses the legacy PCI ID (for the
+     * i82557). This allows the PCI ID to be changed to the alternate
+     * i82559 ID if needed.
+     */
+    if (s->use_alt_device_id && strcmp(info->name, "i82559a") == 0) {
+        pci_config_set_device_id(s->dev.config, info->alt_device_id);
+    }
+
     s->device = info->device;
 
     e100_pci_reset(s, &local_err);
@@ -1974,6 +1984,7 @@ static E100PCIDeviceInfo e100_devices[] = {
         .desc = "Intel i82559A Ethernet",
         .device = i82559A,
         .device_id = PCI_DEVICE_ID_INTEL_82557,
+        .alt_device_id = PCI_DEVICE_ID_INTEL_82559,
         .revision = 0x06,
         .stats_size = 80,
         .has_extended_tcb_support = true,
@@ -2067,6 +2078,8 @@ static E100PCIDeviceInfo 
*eepro100_get_class(EEPRO100State *s)
 
 static Property e100_properties[] = {
     DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
+    DEFINE_PROP_BOOL("x-use-alt-device-id", EEPRO100State, use_alt_device_id,
+                     true),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/include/hw/compat.h b/include/hw/compat.h
index cf389b4e85..f96212c49c 100644
--- a/include/hw/compat.h
+++ b/include/hw/compat.h
@@ -10,6 +10,10 @@
         .driver   = "virtio-tablet-device",\
         .property = "wheel-axis",\
         .value    = "false",\
+    },{\
+        .driver   = "i82559a",\
+        .property = "x-use-alt-device-id",\
+        .value    = "false",\
     },
 
 #define HW_COMPAT_2_9 \
diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
index 8d02a0a383..f30e2cfb72 100644
--- a/include/hw/pci/pci.h
+++ b/include/hw/pci/pci.h
@@ -70,6 +70,7 @@ extern bool pci_available;
 /* Intel (0x8086) */
 #define PCI_DEVICE_ID_INTEL_82551IT      0x1209
 #define PCI_DEVICE_ID_INTEL_82557        0x1229
+#define PCI_DEVICE_ID_INTEL_82559        0x1030
 #define PCI_DEVICE_ID_INTEL_82801IR      0x2922
 
 /* Red Hat / Qumranet (for QEMU) -- see pci-ids.txt */
diff --git a/qemu-options.hx b/qemu-options.hx
index 3728e9b4dd..a39c7e44b3 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2047,7 +2047,7 @@ that the card should have; this option currently only 
affects virtio cards; set
 @var{v} = 0 to disable MSI-X. If no @option{-net} option is specified, a single
 NIC is created.  QEMU can emulate several different models of network card.
 Valid values for @var{type} are
address@hidden, @code{i82551}, @code{i82557b}, @code{i82559er},
address@hidden, @code{i82551}, @code{i82557b}, @code{i82559a}, @code{i82559er},
 @code{ne2k_pci}, @code{ne2k_isa}, @code{pcnet}, @code{rtl8139},
 @code{e1000}, @code{smc91c111}, @code{lance} and @code{mcf_fec}.
 Not all devices are supported on all targets.  Use @code{-net nic,model=help}
-- 
2.14.2