Re: [Qemu-devel] [PATCH V5] hw/pcie-pci-bridge: restrict to X86 and ARM

[Philippe Mathieu-Daudé]

Hi Marcel,

Cc'ing Paul and Yongbok Since I'm not sure their Boston board could also
use it.

On 11/09/2017 12:46 PM, Marcel Apfelbaum wrote:
> The PCIE-PCI bridge is specific to "pure" PCIe systems
> (on QEMU we have X86 and ARM), it does not make sense to
> have it in other archs.
> 
> Reported-by: Thomas Huth <address@hidden>
> Signed-off-by: Marcel Apfelbaum <address@hidden>
> ---
> 
> V4 -> V5
>   - Since all other tries failed, conditioned the
>     device on the PCIe Root Port.
> 
> V3 -> V4:
>  - Move the config line to pci.mak  (Thomas)
> 
> V2 -> V3:
>  - Another tweak in subject s/if/it (Cornelia) 
> 
> V1 -> V2:
>  Addressed Thomas and Cornelia comments:
>  - Conditioned the pcie-pci-bridge compilation on
>    the PCIe Root CONFIG_PCIE_PORT
>  - Tweaked subject PCI -> PCIe
> 
>  Thanks,
>  Marcel
> 
> 
>  hw/pci-bridge/Makefile.objs | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/pci-bridge/Makefile.objs b/hw/pci-bridge/Makefile.objs
> index 666db37da2..1b05023662 100644
> --- a/hw/pci-bridge/Makefile.objs
> +++ b/hw/pci-bridge/Makefile.objs
> @@ -1,5 +1,5 @@
> -common-obj-y += pci_bridge_dev.o pcie_pci_bridge.o
> -common-obj-$(CONFIG_PCIE_PORT) += pcie_root_port.o gen_pcie_root_port.o
> +common-obj-y += pci_bridge_dev.o
> +common-obj-$(CONFIG_PCIE_PORT) += pcie_root_port.o gen_pcie_root_port.o 
> pcie_pci_bridge.o

KISS :)

Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
Tested-by: Philippe Mathieu-Daudé <address@hidden>

>  common-obj-$(CONFIG_PXB) += pci_expander_bridge.o
>  common-obj-$(CONFIG_XIO3130) += xio3130_upstream.o xio3130_downstream.o
>  common-obj-$(CONFIG_IOH3420) += ioh3420.o
>