[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 21/43] target/arm: Split M profile MNegPri mmu index
From: |
Peter Maydell |
Subject: |
[Qemu-devel] [PULL 21/43] target/arm: Split M profile MNegPri mmu index into user and priv |
Date: |
Wed, 13 Dec 2017 18:12:19 +0000 |
For M profile, we currently have an mmu index MNegPri for
"requested execution priority negative". This fails to
distinguish "requested execution priority negative, privileged"
from "requested execution priority negative, usermode", but
the two can return different results for MPU lookups. Fix this
by splitting MNegPri into MNegPriPriv and MNegPriUser, and
similarly for the Secure equivalent MSNegPri.
This takes us from 6 M profile MMU modes to 8, which means
we need to bump NB_MMU_MODES; this is OK since the point
where we are forced to reduce TLB sizes is 9 MMU modes.
(It would in theory be possible to stick with 6 MMU indexes:
{mpu-disabled,user,privileged} x {secure,nonsecure} since
in the MPU-disabled case the result of an MPU lookup is
always the same for both user and privileged code. However
we would then need to rework the TB flags handling to put
user/priv into the TB flags separately from the mmuidx.
Adding an extra couple of mmu indexes is simpler.)
Signed-off-by: Peter Maydell <address@hidden>
Reviewed-by: Richard Henderson <address@hidden>
Message-id: address@hidden
---
target/arm/cpu.h | 54 ++++++++++++++++++++++++++++++--------------------
target/arm/internals.h | 6 ++++--
target/arm/helper.c | 11 ++++++----
target/arm/translate.c | 8 ++++++--
4 files changed, 50 insertions(+), 29 deletions(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 89d49cd..c42d62d 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -112,7 +112,7 @@ enum {
#define ARM_CPU_VIRQ 2
#define ARM_CPU_VFIQ 3
-#define NB_MMU_MODES 7
+#define NB_MMU_MODES 8
/* ARM-specific extra insn start words:
* 1: Conditional execution bits
* 2: Partial exception syndrome for data aborts
@@ -2226,13 +2226,13 @@ static inline bool arm_excp_unmasked(CPUState *cs,
unsigned int excp_idx,
* They have the following different MMU indexes:
* User
* Privileged
- * Execution priority negative (this is like privileged, but the
- * MPU HFNMIENA bit means that it may have different access permission
- * check results to normal privileged code, so can't share a TLB).
+ * User, execution priority negative (ie the MPU HFNMIENA bit may apply)
+ * Privileged, execution priority negative (ditto)
* If the CPU supports the v8M Security Extension then there are also:
* Secure User
* Secure Privileged
- * Secure, execution priority negative
+ * Secure User, execution priority negative
+ * Secure Privileged, execution priority negative
*
* The ARMMMUIdx and the mmu index value used by the core QEMU TLB code
* are not quite the same -- different CPU types (most notably M profile
@@ -2251,11 +2251,18 @@ static inline bool arm_excp_unmasked(CPUState *cs,
unsigned int excp_idx,
* The constant names here are patterned after the general style of the names
* of the AT/ATS operations.
* The values used are carefully arranged to make mmu_idx => EL lookup easy.
+ * For M profile we arrange them to have a bit for priv, a bit for negpri
+ * and a bit for secure.
*/
#define ARM_MMU_IDX_A 0x10 /* A profile */
#define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */
#define ARM_MMU_IDX_M 0x40 /* M profile */
+/* meanings of the bits for M profile mmu idx values */
+#define ARM_MMU_IDX_M_PRIV 0x1
+#define ARM_MMU_IDX_M_NEGPRI 0x2
+#define ARM_MMU_IDX_M_S 0x4
+
#define ARM_MMU_IDX_TYPE_MASK (~0x7)
#define ARM_MMU_IDX_COREIDX_MASK 0x7
@@ -2269,10 +2276,12 @@ typedef enum ARMMMUIdx {
ARMMMUIdx_S2NS = 6 | ARM_MMU_IDX_A,
ARMMMUIdx_MUser = 0 | ARM_MMU_IDX_M,
ARMMMUIdx_MPriv = 1 | ARM_MMU_IDX_M,
- ARMMMUIdx_MNegPri = 2 | ARM_MMU_IDX_M,
- ARMMMUIdx_MSUser = 3 | ARM_MMU_IDX_M,
- ARMMMUIdx_MSPriv = 4 | ARM_MMU_IDX_M,
- ARMMMUIdx_MSNegPri = 5 | ARM_MMU_IDX_M,
+ ARMMMUIdx_MUserNegPri = 2 | ARM_MMU_IDX_M,
+ ARMMMUIdx_MPrivNegPri = 3 | ARM_MMU_IDX_M,
+ ARMMMUIdx_MSUser = 4 | ARM_MMU_IDX_M,
+ ARMMMUIdx_MSPriv = 5 | ARM_MMU_IDX_M,
+ ARMMMUIdx_MSUserNegPri = 6 | ARM_MMU_IDX_M,
+ ARMMMUIdx_MSPrivNegPri = 7 | ARM_MMU_IDX_M,
/* Indexes below here don't have TLBs and are used only for AT system
* instructions or for the first stage of an S12 page table walk.
*/
@@ -2293,10 +2302,12 @@ typedef enum ARMMMUIdxBit {
ARMMMUIdxBit_S2NS = 1 << 6,
ARMMMUIdxBit_MUser = 1 << 0,
ARMMMUIdxBit_MPriv = 1 << 1,
- ARMMMUIdxBit_MNegPri = 1 << 2,
- ARMMMUIdxBit_MSUser = 1 << 3,
- ARMMMUIdxBit_MSPriv = 1 << 4,
- ARMMMUIdxBit_MSNegPri = 1 << 5,
+ ARMMMUIdxBit_MUserNegPri = 1 << 2,
+ ARMMMUIdxBit_MPrivNegPri = 1 << 3,
+ ARMMMUIdxBit_MSUser = 1 << 4,
+ ARMMMUIdxBit_MSPriv = 1 << 5,
+ ARMMMUIdxBit_MSUserNegPri = 1 << 6,
+ ARMMMUIdxBit_MSPrivNegPri = 1 << 7,
} ARMMMUIdxBit;
#define MMU_USER_IDX 0
@@ -2322,8 +2333,7 @@ static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx)
case ARM_MMU_IDX_A:
return mmu_idx & 3;
case ARM_MMU_IDX_M:
- return (mmu_idx == ARMMMUIdx_MUser || mmu_idx == ARMMMUIdx_MSUser)
- ? 0 : 1;
+ return mmu_idx & ARM_MMU_IDX_M_PRIV;
default:
g_assert_not_reached();
}
@@ -2334,16 +2344,18 @@ static inline ARMMMUIdx
arm_v7m_mmu_idx_for_secstate(CPUARMState *env,
bool secstate)
{
int el = arm_current_el(env);
- ARMMMUIdx mmu_idx;
+ ARMMMUIdx mmu_idx = ARM_MMU_IDX_M;
- if (el == 0) {
- mmu_idx = secstate ? ARMMMUIdx_MSUser : ARMMMUIdx_MUser;
- } else {
- mmu_idx = secstate ? ARMMMUIdx_MSPriv : ARMMMUIdx_MPriv;
+ if (el != 0) {
+ mmu_idx |= ARM_MMU_IDX_M_PRIV;
}
if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) {
- mmu_idx = secstate ? ARMMMUIdx_MSNegPri : ARMMMUIdx_MNegPri;
+ mmu_idx |= ARM_MMU_IDX_M_NEGPRI;
+ }
+
+ if (secstate) {
+ mmu_idx |= ARM_MMU_IDX_M_S;
}
return mmu_idx;
diff --git a/target/arm/internals.h b/target/arm/internals.h
index d9cc75e..aa9c91b 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -544,15 +544,17 @@ static inline bool regime_is_secure(CPUARMState *env,
ARMMMUIdx mmu_idx)
case ARMMMUIdx_S1NSE1:
case ARMMMUIdx_S1E2:
case ARMMMUIdx_S2NS:
+ case ARMMMUIdx_MPrivNegPri:
+ case ARMMMUIdx_MUserNegPri:
case ARMMMUIdx_MPriv:
- case ARMMMUIdx_MNegPri:
case ARMMMUIdx_MUser:
return false;
case ARMMMUIdx_S1E3:
case ARMMMUIdx_S1SE0:
case ARMMMUIdx_S1SE1:
+ case ARMMMUIdx_MSPrivNegPri:
+ case ARMMMUIdx_MSUserNegPri:
case ARMMMUIdx_MSPriv:
- case ARMMMUIdx_MSNegPri:
case ARMMMUIdx_MSUser:
return true;
default:
diff --git a/target/arm/helper.c b/target/arm/helper.c
index c4c8d5a..70cf313 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -7856,11 +7856,13 @@ static inline uint32_t regime_el(CPUARMState *env,
ARMMMUIdx mmu_idx)
case ARMMMUIdx_S1SE1:
case ARMMMUIdx_S1NSE0:
case ARMMMUIdx_S1NSE1:
+ case ARMMMUIdx_MPrivNegPri:
+ case ARMMMUIdx_MUserNegPri:
case ARMMMUIdx_MPriv:
- case ARMMMUIdx_MNegPri:
case ARMMMUIdx_MUser:
+ case ARMMMUIdx_MSPrivNegPri:
+ case ARMMMUIdx_MSUserNegPri:
case ARMMMUIdx_MSPriv:
- case ARMMMUIdx_MSNegPri:
case ARMMMUIdx_MSUser:
return 1;
default:
@@ -7883,8 +7885,7 @@ static inline bool
regime_translation_disabled(CPUARMState *env,
(R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK)) {
case R_V7M_MPU_CTRL_ENABLE_MASK:
/* Enabled, but not for HardFault and NMI */
- return mmu_idx == ARMMMUIdx_MNegPri ||
- mmu_idx == ARMMMUIdx_MSNegPri;
+ return mmu_idx & ARM_MMU_IDX_M_NEGPRI;
case R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK:
/* Enabled for all cases */
return false;
@@ -8017,6 +8018,8 @@ static inline bool regime_is_user(CPUARMState *env,
ARMMMUIdx mmu_idx)
case ARMMMUIdx_S1NSE0:
case ARMMMUIdx_MUser:
case ARMMMUIdx_MSUser:
+ case ARMMMUIdx_MUserNegPri:
+ case ARMMMUIdx_MSUserNegPri:
return true;
default:
return false;
diff --git a/target/arm/translate.c b/target/arm/translate.c
index f120932..50339e7 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -159,12 +159,16 @@ static inline int get_a32_user_mem_index(DisasContext *s)
return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0);
case ARMMMUIdx_MUser:
case ARMMMUIdx_MPriv:
- case ARMMMUIdx_MNegPri:
return arm_to_core_mmu_idx(ARMMMUIdx_MUser);
+ case ARMMMUIdx_MUserNegPri:
+ case ARMMMUIdx_MPrivNegPri:
+ return arm_to_core_mmu_idx(ARMMMUIdx_MUserNegPri);
case ARMMMUIdx_MSUser:
case ARMMMUIdx_MSPriv:
- case ARMMMUIdx_MSNegPri:
return arm_to_core_mmu_idx(ARMMMUIdx_MSUser);
+ case ARMMMUIdx_MSUserNegPri:
+ case ARMMMUIdx_MSPrivNegPri:
+ return arm_to_core_mmu_idx(ARMMMUIdx_MSUserNegPri);
case ARMMMUIdx_S2NS:
default:
g_assert_not_reached();
--
2.7.4
- [Qemu-devel] [PULL 14/43] hw/intc/arm_gicv3_its: Don't call post_load on reset, (continued)
- [Qemu-devel] [PULL 14/43] hw/intc/arm_gicv3_its: Don't call post_load on reset, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 15/43] hw/intc/arm_gicv3_its: Implement a minimalist reset, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 20/43] target/arm: Add missing M profile case to regime_is_user(), Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 08/43] xilinx_spips: Make tx/rx_data_bytes more generic and reusable, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 07/43] xilinx_spips: Add support for RX discard and RX drain, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 10/43] xilinx_spips: Add support for 4 byte addresses in the LQSPI, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 17/43] hw/intc/arm_gicv3_its: Implement full reset, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 18/43] target/arm: Handle SPSEL and current stack being out of sync in MSP/PSP reads, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 12/43] xilinx_spips: Add support for the ZynqMP Generic QSPI, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 13/43] xlnx-zcu102: Add support for the ZynqMP QSPI, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 21/43] target/arm: Split M profile MNegPri mmu index into user and priv,
Peter Maydell <=
- [Qemu-devel] [PULL 22/43] target/arm: Create new arm_v7m_mmu_idx_for_secstate_and_priv(), Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 25/43] target/arm: Provide fault type enum and FSR conversion functions, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 27/43] target/arm: Convert get_phys_addr_v5() to not return FSC values, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 23/43] target/arm: Factor MPU lookup code out of get_phys_addr_pmsav8(), Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 30/43] target/arm: Convert get_phys_addr_pmsav5() to not return FSC values, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 29/43] target/arm: Convert get_phys_addr_lpae() to not return FSC values, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 28/43] target/arm: Convert get_phys_addr_v6() to not return FSC values, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 24/43] target/arm: Implement TT instruction, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 31/43] target/arm: Convert get_phys_addr_pmsav7() to not return FSC values, Peter Maydell, 2017/12/13
- [Qemu-devel] [PULL 26/43] target/arm: Remove fsr argument from arm_ld*_ptw(), Peter Maydell, 2017/12/13