qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 19/21] SiFive Freedom E300 RISC-V Machine


From: Michael Clark
Subject: [Qemu-devel] [PATCH v3 19/21] SiFive Freedom E300 RISC-V Machine
Date: Wed, 10 Jan 2018 18:22:02 -0800

This provides a RISC-V Board compatible with the the SiFive E300 SDK.
The following machine is implemented:

- 'sifive_e300'; CLINT, PLIC, UART, AON, GPIO, QSPI, PWM

Signed-off-by: Michael Clark <address@hidden>
---
 hw/riscv/sifive_e300.c         | 232 +++++++++++++++++++++++++++++++++++++++++
 include/hw/riscv/sifive_e300.h |  79 ++++++++++++++
 2 files changed, 311 insertions(+)
 create mode 100644 hw/riscv/sifive_e300.c
 create mode 100644 include/hw/riscv/sifive_e300.h

diff --git a/hw/riscv/sifive_e300.c b/hw/riscv/sifive_e300.c
new file mode 100644
index 0000000..bbea55a
--- /dev/null
+++ b/hw/riscv/sifive_e300.c
@@ -0,0 +1,232 @@
+/*
+ * QEMU RISC-V Board Compatible with SiFive E300 SDK
+ *
+ * Copyright (c) 2017 SiFive, Inc.
+ *
+ * Provides a board compatible with the bsp in the SiFive E300 SDK:
+ *
+ * 0) UART
+ * 1) CLINT (Core Level Interruptor)
+ * 2) PLIC (Platform Level Interrupt Controller)
+ * 3) PRCI (Power, Reset, Clock, Interrupt)
+ * 4) Registers emulated as RAM: AON, GPIO, QSPI, PWM
+ * 5) Flash memory emulated as RAM
+ *
+ * The Mask ROM reset vector jumps to the flash payload at 0x2040_0000.
+ * The OTP ROM and Flash boot code will be emulated in a future version.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to 
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/error-report.h"
+#include "hw/hw.h"
+#include "hw/boards.h"
+#include "hw/loader.h"
+#include "hw/sysbus.h"
+#include "hw/char/serial.h"
+#include "target/riscv/cpu.h"
+#include "hw/riscv/riscv_hart.h"
+#include "hw/riscv/sifive_plic.h"
+#include "hw/riscv/sifive_clint.h"
+#include "hw/riscv/sifive_prci.h"
+#include "hw/riscv/sifive_uart.h"
+#include "hw/riscv/sifive_e300.h"
+#include "chardev/char.h"
+#include "sysemu/arch_init.h"
+#include "exec/address-spaces.h"
+#include "elf.h"
+
+static const struct MemmapEntry {
+    hwaddr base;
+    hwaddr size;
+} sifive_e300_memmap[] = {
+    [SIFIVE_E300_DEBUG] =    {        0x0,      0x100 },
+    [SIFIVE_E300_MROM] =     {     0x1000,     0x2000 },
+    [SIFIVE_E300_OTP] =      {    0x20000,     0x2000 },
+    [SIFIVE_E300_CLINT] =    {  0x2000000,    0x10000 },
+    [SIFIVE_E300_PLIC] =     {  0xc000000,  0x4000000 },
+    [SIFIVE_E300_AON] =      { 0x10000000,     0x8000 },
+    [SIFIVE_E300_PRCI] =     { 0x10008000,     0x8000 },
+    [SIFIVE_E300_OTP_CTRL] = { 0x10010000,     0x1000 },
+    [SIFIVE_E300_GPIO0] =    { 0x10012000,     0x1000 },
+    [SIFIVE_E300_UART0] =    { 0x10013000,     0x1000 },
+    [SIFIVE_E300_QSPI0] =    { 0x10014000,     0x1000 },
+    [SIFIVE_E300_PWM0] =     { 0x10015000,     0x1000 },
+    [SIFIVE_E300_UART1] =    { 0x10023000,     0x1000 },
+    [SIFIVE_E300_QSPI1] =    { 0x10024000,     0x1000 },
+    [SIFIVE_E300_PWM1] =     { 0x10025000,     0x1000 },
+    [SIFIVE_E300_QSPI2] =    { 0x10034000,     0x1000 },
+    [SIFIVE_E300_PWM2] =     { 0x10035000,     0x1000 },
+    [SIFIVE_E300_XIP] =      { 0x20000000, 0x20000000 },
+    [SIFIVE_E300_DTIM] =     { 0x80000000,     0x4000 }
+};
+
+static uint64_t identity_translate(void *opaque, uint64_t addr)
+{
+    return addr;
+}
+
+static uint64_t load_kernel(const char *kernel_filename)
+{
+    uint64_t kernel_entry, kernel_high;
+
+    if (load_elf(kernel_filename, identity_translate, NULL,
+                 &kernel_entry, NULL, &kernel_high,
+                 /* little_endian = */ 0, ELF_MACHINE, 1, 0) < 0) {
+        error_report("qemu: could not load kernel '%s'", kernel_filename);
+        exit(1);
+    }
+    return kernel_entry;
+}
+
+static void sifive_mmio_emulate(MemoryRegion *parent, const char *name,
+                             uintptr_t offset, uintptr_t length)
+{
+    MemoryRegion *mock_mmio = g_new(MemoryRegion, 1);
+    memory_region_init_ram(mock_mmio, NULL, name, length, &error_fatal);
+    memory_region_add_subregion(parent, offset, mock_mmio);
+}
+
+static void riscv_sifive_e300_init(MachineState *machine)
+{
+    const struct MemmapEntry *memmap = sifive_e300_memmap;
+
+    SiFiveE300State *s = g_new0(SiFiveE300State, 1);
+    MemoryRegion *sys_mem = get_system_memory();
+    MemoryRegion *main_mem = g_new(MemoryRegion, 1);
+    MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
+    MemoryRegion *xip_mem = g_new(MemoryRegion, 1);
+
+    /* Initialize SOC */
+    object_initialize(&s->soc, sizeof(s->soc), TYPE_RISCV_HART_ARRAY);
+    object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
+                              &error_abort);
+    object_property_set_str(OBJECT(&s->soc), TYPE_RISCV_CPU_IMAC_PRIV_1_10,
+                            "cpu-model", &error_abort);
+    object_property_set_int(OBJECT(&s->soc), smp_cpus, "num-harts",
+                            &error_abort);
+    object_property_set_bool(OBJECT(&s->soc), true, "realized",
+                            &error_abort);
+
+    /* Data Tightly Integrated Memory */
+    memory_region_init_ram(main_mem, NULL, "riscv.sifive.e300.ram",
+        memmap[SIFIVE_E300_DTIM].size, &error_fatal);
+    memory_region_add_subregion(sys_mem,
+        memmap[SIFIVE_E300_DTIM].base, main_mem);
+
+    /* Mask ROM */
+    memory_region_init_ram(mask_rom, NULL, "riscv.sifive.e300.mrom",
+        memmap[SIFIVE_E300_MROM].size, &error_fatal);
+    memory_region_add_subregion(sys_mem,
+        memmap[SIFIVE_E300_MROM].base, mask_rom);
+
+    /* MMIO */
+    s->plic = sifive_plic_create(memmap[SIFIVE_E300_PLIC].base,
+        (char *)SIFIVE_E300_PLIC_HART_CONFIG,
+        SIFIVE_E300_PLIC_NUM_SOURCES,
+        SIFIVE_E300_PLIC_NUM_PRIORITIES,
+        SIFIVE_E300_PLIC_PRIORITY_BASE,
+        SIFIVE_E300_PLIC_PENDING_BASE,
+        SIFIVE_E300_PLIC_ENABLE_BASE,
+        SIFIVE_E300_PLIC_ENABLE_STRIDE,
+        SIFIVE_E300_PLIC_CONTEXT_BASE,
+        SIFIVE_E300_PLIC_CONTEXT_STRIDE,
+        memmap[SIFIVE_E300_PLIC].size);
+    sifive_clint_create(memmap[SIFIVE_E300_CLINT].base,
+        memmap[SIFIVE_E300_CLINT].size, smp_cpus,
+        SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE);
+    sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.aon",
+        memmap[SIFIVE_E300_AON].base, memmap[SIFIVE_E300_AON].size);
+    sifive_prci_create(memmap[SIFIVE_E300_PRCI].base);
+    sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.gpio0",
+        memmap[SIFIVE_E300_GPIO0].base, memmap[SIFIVE_E300_GPIO0].size);
+    sifive_uart_create(sys_mem, memmap[SIFIVE_E300_UART0].base,
+        serial_hds[0], SIFIVE_PLIC(s->plic)->irqs[SIFIVE_E300_UART0_IRQ]);
+    sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.qspi0",
+        memmap[SIFIVE_E300_QSPI0].base, memmap[SIFIVE_E300_QSPI0].size);
+    sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.pwm0",
+        memmap[SIFIVE_E300_PWM0].base, memmap[SIFIVE_E300_PWM0].size);
+    /* sifive_uart_create(sys_mem, memmap[SIFIVE_E300_UART1].base,
+        serial_hds[1], SIFIVE_PLIC(s->plic)->irqs[SIFIVE_E300_UART1_IRQ]); */
+    sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.qspi1",
+        memmap[SIFIVE_E300_QSPI1].base, memmap[SIFIVE_E300_QSPI1].size);
+    sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.pwm1",
+        memmap[SIFIVE_E300_PWM1].base, memmap[SIFIVE_E300_PWM1].size);
+    sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.qspi2",
+        memmap[SIFIVE_E300_QSPI2].base, memmap[SIFIVE_E300_QSPI2].size);
+    sifive_mmio_emulate(sys_mem, "riscv.sifive.e300.pwm2",
+        memmap[SIFIVE_E300_PWM2].base, memmap[SIFIVE_E300_PWM2].size);
+
+    /* Flash memory */
+    memory_region_init_ram(xip_mem, NULL, "riscv.sifive.e300.xip",
+        memmap[SIFIVE_E300_XIP].size, &error_fatal);
+    memory_region_set_readonly(xip_mem, true);
+    memory_region_add_subregion(sys_mem,
+        memmap[SIFIVE_E300_XIP].base, xip_mem);
+
+    /* Mask ROM reset vector */
+    uint32_t reset_vec[2] = {
+        0x204002b7,        /* 0x1000: lui     t0,0x20400 */
+        0x00028067,        /* 0x1004: jr      t0 */
+    };
+
+    /* copy in the reset vector */
+    cpu_physical_memory_write(0x1000, reset_vec, sizeof(reset_vec));
+    memory_region_set_readonly(mask_rom, true);
+
+    if (machine->kernel_filename) {
+        load_kernel(machine->kernel_filename);
+    }
+}
+
+static int riscv_sifive_e300_sysbus_device_init(SysBusDevice *sysbusdev)
+{
+    return 0;
+}
+
+static void riscv_sifive_e300_class_init(ObjectClass *klass, void *data)
+{
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+    k->init = riscv_sifive_e300_sysbus_device_init;
+}
+
+static const TypeInfo riscv_sifive_e300_device = {
+    .name          = TYPE_SIFIVE_E300,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(SiFiveE300State),
+    .class_init    = riscv_sifive_e300_class_init,
+};
+
+static void riscv_sifive_e300_machine_init(MachineClass *mc)
+{
+    mc->desc = "RISC-V Board compatible with SiFive E300 SDK";
+    mc->init = riscv_sifive_e300_init;
+    mc->max_cpus = 1;
+}
+
+DEFINE_MACHINE("sifive_e300", riscv_sifive_e300_machine_init)
+
+static void riscv_sifive_e300_register_types(void)
+{
+    type_register_static(&riscv_sifive_e300_device);
+}
+
+type_init(riscv_sifive_e300_register_types);
diff --git a/include/hw/riscv/sifive_e300.h b/include/hw/riscv/sifive_e300.h
new file mode 100644
index 0000000..453c43b
--- /dev/null
+++ b/include/hw/riscv/sifive_e300.h
@@ -0,0 +1,79 @@
+/*
+ * SiFive E300 series machine interface
+ *
+ * Copyright (c) 2017 SiFive, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to 
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_SIFIVE_E300_H
+#define HW_SIFIVE_E300_H
+
+#define TYPE_SIFIVE_E300 "riscv.sifive.e300"
+
+#define SIFIVE_E300(obj) \
+    OBJECT_CHECK(SiFiveE300State, (obj), TYPE_SIFIVE_E300)
+
+typedef struct SiFiveE300State {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    RISCVHartArrayState soc;
+    DeviceState *plic;
+} SiFiveE300State;
+
+enum {
+    SIFIVE_E300_DEBUG,
+    SIFIVE_E300_MROM,
+    SIFIVE_E300_OTP,
+    SIFIVE_E300_CLINT,
+    SIFIVE_E300_PLIC,
+    SIFIVE_E300_AON,
+    SIFIVE_E300_PRCI,
+    SIFIVE_E300_OTP_CTRL,
+    SIFIVE_E300_GPIO0,
+    SIFIVE_E300_UART0,
+    SIFIVE_E300_QSPI0,
+    SIFIVE_E300_PWM0,
+    SIFIVE_E300_UART1,
+    SIFIVE_E300_QSPI1,
+    SIFIVE_E300_PWM1,
+    SIFIVE_E300_QSPI2,
+    SIFIVE_E300_PWM2,
+    SIFIVE_E300_XIP,
+    SIFIVE_E300_DTIM
+};
+
+enum {
+    SIFIVE_E300_UART0_IRQ = 3,
+    SIFIVE_E300_UART1_IRQ = 4
+};
+
+#define SIFIVE_E300_PLIC_HART_CONFIG "M"
+#define SIFIVE_E300_PLIC_NUM_SOURCES 127
+#define SIFIVE_E300_PLIC_NUM_PRIORITIES 7
+#define SIFIVE_E300_PLIC_PRIORITY_BASE 0x0
+#define SIFIVE_E300_PLIC_PENDING_BASE 0x1000
+#define SIFIVE_E300_PLIC_ENABLE_BASE 0x2000
+#define SIFIVE_E300_PLIC_ENABLE_STRIDE 0x80
+#define SIFIVE_E300_PLIC_CONTEXT_BASE 0x200000
+#define SIFIVE_E300_PLIC_CONTEXT_STRIDE 0x1000
+
+#endif
-- 
2.7.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]