[Qemu-devel] [PULL 14/14] ui: mix misleading comments & return types of VNC I/O helper methods

[Gerd Hoffmann]

From: "Daniel P. Berrange" <address@hidden>

While the QIOChannel APIs for reading/writing data return ssize_t, with negative
value indicating an error, the VNC code passes this return value through the
vnc_client_io_error() method. This detects the error condition, disconnects the
client and returns 0 to indicate error. Thus all the VNC helper methods should
return size_t (unsigned), and misleading comments which refer to the possibility
of negative return values need fixing.

Signed-off-by: Daniel P. Berrange <address@hidden>
Reviewed-by: Darren Kenny <address@hidden>
Reviewed-by: Marc-André Lureau <address@hidden>
Message-id: address@hidden
Signed-off-by: Gerd Hoffmann <address@hidden>
---
 ui/vnc-auth-sasl.h |  4 ++--
 ui/vnc.h           |  6 +++---
 ui/vnc-auth-sasl.c |  8 ++++----
 ui/vnc.c           | 29 +++++++++++++++--------------
 4 files changed, 24 insertions(+), 23 deletions(-)

diff --git a/ui/vnc-auth-sasl.h b/ui/vnc-auth-sasl.h
index b9d8de1c10..2ae224ee3a 100644
--- a/ui/vnc-auth-sasl.h
+++ b/ui/vnc-auth-sasl.h
@@ -65,8 +65,8 @@ struct VncDisplaySASL {
 
 void vnc_sasl_client_cleanup(VncState *vs);
 
-long vnc_client_read_sasl(VncState *vs);
-long vnc_client_write_sasl(VncState *vs);
+size_t vnc_client_read_sasl(VncState *vs);
+size_t vnc_client_write_sasl(VncState *vs);
 
 void start_auth_sasl(VncState *vs);
 
diff --git a/ui/vnc.h b/ui/vnc.h
index 3f4cd4d93d..0c33a5f7fe 100644
--- a/ui/vnc.h
+++ b/ui/vnc.h
@@ -524,8 +524,8 @@ gboolean vnc_client_io(QIOChannel *ioc,
                        GIOCondition condition,
                        void *opaque);
 
-ssize_t vnc_client_read_buf(VncState *vs, uint8_t *data, size_t datalen);
-ssize_t vnc_client_write_buf(VncState *vs, const uint8_t *data, size_t 
datalen);
+size_t vnc_client_read_buf(VncState *vs, uint8_t *data, size_t datalen);
+size_t vnc_client_write_buf(VncState *vs, const uint8_t *data, size_t datalen);
 
 /* Protocol I/O functions */
 void vnc_write(VncState *vs, const void *data, size_t len);
@@ -544,7 +544,7 @@ uint32_t read_u32(uint8_t *data, size_t offset);
 
 /* Protocol stage functions */
 void vnc_client_error(VncState *vs);
-ssize_t vnc_client_io_error(VncState *vs, ssize_t ret, Error **errp);
+size_t vnc_client_io_error(VncState *vs, ssize_t ret, Error **errp);
 
 void start_client_init(VncState *vs);
 void start_auth_vnc(VncState *vs);
diff --git a/ui/vnc-auth-sasl.c b/ui/vnc-auth-sasl.c
index 8c1cdde3db..74a5f513f2 100644
--- a/ui/vnc-auth-sasl.c
+++ b/ui/vnc-auth-sasl.c
@@ -48,9 +48,9 @@ void vnc_sasl_client_cleanup(VncState *vs)
 }
 
 
-long vnc_client_write_sasl(VncState *vs)
+size_t vnc_client_write_sasl(VncState *vs)
 {
-    long ret;
+    size_t ret;
 
     VNC_DEBUG("Write SASL: Pending output %p size %zd offset %zd "
               "Encoded: %p size %d offset %d\n",
@@ -106,9 +106,9 @@ long vnc_client_write_sasl(VncState *vs)
 }
 
 
-long vnc_client_read_sasl(VncState *vs)
+size_t vnc_client_read_sasl(VncState *vs)
 {
-    long ret;
+    size_t ret;
     uint8_t encoded[4096];
     const char *decoded;
     unsigned int decodedLen;
diff --git a/ui/vnc.c b/ui/vnc.c
index 0a5e629d5d..665a143578 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -1272,7 +1272,7 @@ void vnc_disconnect_finish(VncState *vs)
     g_free(vs);
 }
 
-ssize_t vnc_client_io_error(VncState *vs, ssize_t ret, Error **errp)
+size_t vnc_client_io_error(VncState *vs, ssize_t ret, Error **errp)
 {
     if (ret <= 0) {
         if (ret == 0) {
@@ -1315,9 +1315,9 @@ void vnc_client_error(VncState *vs)
  *
  * Returns the number of bytes written, which may be less than
  * the requested 'datalen' if the socket would block. Returns
- * -1 on error, and disconnects the client socket.
+ * 0 on I/O error, and disconnects the client socket.
  */
-ssize_t vnc_client_write_buf(VncState *vs, const uint8_t *data, size_t datalen)
+size_t vnc_client_write_buf(VncState *vs, const uint8_t *data, size_t datalen)
 {
     Error *err = NULL;
     ssize_t ret;
@@ -1335,13 +1335,13 @@ ssize_t vnc_client_write_buf(VncState *vs, const 
uint8_t *data, size_t datalen)
  * will switch the FD poll() handler back to read monitoring.
  *
  * Returns the number of bytes written, which may be less than
- * the buffered output data if the socket would block. Returns
- * -1 on error, and disconnects the client socket.
+ * the buffered output data if the socket would block.  Returns
+ * 0 on I/O error, and disconnects the client socket.
  */
-static ssize_t vnc_client_write_plain(VncState *vs)
+static size_t vnc_client_write_plain(VncState *vs)
 {
     size_t offset;
-    ssize_t ret;
+    size_t ret;
 
 #ifdef CONFIG_VNC_SASL
     VNC_DEBUG("Write Plain: Pending output %p size %zd offset %zd. Wait SSF 
%d\n",
@@ -1442,9 +1442,9 @@ void vnc_read_when(VncState *vs, VncReadEvent *func, 
size_t expecting)
  *
  * Returns the number of bytes read, which may be less than
  * the requested 'datalen' if the socket would block. Returns
- * -1 on error, and disconnects the client socket.
+ * 0 on I/O error or EOF, and disconnects the client socket.
  */
-ssize_t vnc_client_read_buf(VncState *vs, uint8_t *data, size_t datalen)
+size_t vnc_client_read_buf(VncState *vs, uint8_t *data, size_t datalen)
 {
     ssize_t ret;
     Error *err = NULL;
@@ -1460,12 +1460,13 @@ ssize_t vnc_client_read_buf(VncState *vs, uint8_t 
*data, size_t datalen)
  * when not using any SASL SSF encryption layers. Will read as much
  * data as possible without blocking.
  *
- * Returns the number of bytes read. Returns -1 on error, and
- * disconnects the client socket.
+ * Returns the number of bytes read, which may be less than
+ * the requested 'datalen' if the socket would block. Returns
+ * 0 on I/O error or EOF, and disconnects the client socket.
  */
-static ssize_t vnc_client_read_plain(VncState *vs)
+static size_t vnc_client_read_plain(VncState *vs)
 {
-    ssize_t ret;
+    size_t ret;
     VNC_DEBUG("Read plain %p size %zd offset %zd\n",
               vs->input.buffer, vs->input.capacity, vs->input.offset);
     buffer_reserve(&vs->input, 4096);
@@ -1491,7 +1492,7 @@ static void vnc_jobs_bh(void *opaque)
  */
 static int vnc_client_read(VncState *vs)
 {
-    ssize_t ret;
+    size_t ret;
 
 #ifdef CONFIG_VNC_SASL
     if (vs->sasl.conn && vs->sasl.runSSF)
-- 
2.9.3