[Qemu-devel] [PATCH 1/4] Add the Windows Hypervisor Platform accelerator.

[Justin Terry (VM)]

Introduces the configure support for the new Windows Hypervisor Platform that
allows for hypervisor acceleration from usermode components on the Windows
platform.

Signed-off-by: Justin Terry (VM) <address@hidden>
---
 configure       | 48 +++++++++++++++++++++++++++++++++++++++++++++++-
 qemu-options.hx |  8 ++++----
 2 files changed, 51 insertions(+), 5 deletions(-)

diff --git a/configure b/configure
index 89bd662..8d5a065 100755
--- a/configure
+++ b/configure
@@ -222,6 +222,17 @@ supported_hvf_target() {
     return 1
 }
 
+supported_whpx_target() {
+    test "$whpx" = "yes" || return 1
+    glob "$1" "*-softmmu" || return 1
+    case "${1%-softmmu}" in
+        i386|x86_64)
+            return 0
+        ;;
+    esac
+    return 1
+}
+
 supported_target() {
     case "$1" in
         *-softmmu)
@@ -248,6 +259,7 @@ supported_target() {
     supported_xen_target "$1" && return 0
     supported_hax_target "$1" && return 0
     supported_hvf_target "$1" && return 0
+    supported_whpx_target "$1" && return 0
     print_error "TCG disabled, but hardware accelerator not available for 
'$target'"
     return 1
 }
@@ -338,6 +350,7 @@ vhost_user=""
 kvm="no"
 hax="no"
 hvf="no"
+whpx="no"
 rdma=""
 gprof="no"
 debug_tcg="no"
@@ -1054,6 +1067,10 @@ for opt do
   ;;
   --enable-hvf) hvf="yes"
   ;;
+  --disable-whpx) whpx="no"
+  ;;
+  --enable-whpx) whpx="yes"
+  ;;
   --disable-tcg-interpreter) tcg_interpreter="no"
   ;;
   --enable-tcg-interpreter) tcg_interpreter="yes"
@@ -1548,6 +1565,7 @@ disabled with --disable-FEATURE, default is enabled if 
available:
   kvm             KVM acceleration support
   hax             HAX acceleration support
   hvf             Hypervisor.framework acceleration support
+  whpx            Windows Hypervisor Platform acceleration support
   rdma            RDMA-based migration support
   vde             support for vde network
   netmap          support for netmap network
@@ -2446,6 +2464,30 @@ if test "$xen_pv_domain_build" = "yes" &&
 fi
 
 ##########################################
+# Windows Hypervisor Platform accelerator (WHPX) check
+if test "$whpx" != "no" ; then
+    cat > $TMPC << EOF
+#include <windows.h>
+#include <winhvplatform.h>
+#include <winhvemulation.h>
+int main(void) {
+    WHV_CAPABILITY whpx_cap;
+    WHvGetCapability(WHvCapabilityCodeFeatures, &whpx_cap, sizeof(whpx_cap));
+    return 0;
+}
+EOF
+    if compile_prog "" "-lwinhvplatform -lwinhvemulation" ; then
+        libs_softmmu="$libs_softmmu -lwinhvplatform -lwinhvemulation"
+        whpx="yes"
+    else
+        if test "$whpx" = "yes"; then
+            feature_not_found "winhvplatform" "winhvemulation is not installed"
+        fi
+        whpx="no"
+    fi
+fi
+
+##########################################
 # Sparse probe
 if test "$sparse" != "no" ; then
   if has cgcc; then
@@ -5565,6 +5607,7 @@ echo "Install blobs     $blobs"
 echo "KVM support       $kvm"
 echo "HAX support       $hax"
 echo "HVF support       $hvf"
+echo "WHPX support      $whpx"
 echo "TCG support       $tcg"
 if test "$tcg" = "yes" ; then
     echo "TCG debug enabled $debug_tcg"
@@ -5719,7 +5762,7 @@ if test "$mingw32" = "yes" ; then
     echo "CONFIG_QGA_NTDDDISK=y" >> $config_host_mak
   fi
   if test "$guest_agent_msi" = "yes"; then
-    echo "QEMU_GA_MSI_ENABLED=yes" >> $config_host_mak  
+    echo "QEMU_GA_MSI_ENABLED=yes" >> $config_host_mak
     echo "QEMU_GA_MSI_MINGW_DLL_PATH=${QEMU_GA_MSI_MINGW_DLL_PATH}" >> 
$config_host_mak
     echo "QEMU_GA_MSI_WITH_VSS=${QEMU_GA_MSI_WITH_VSS}" >> $config_host_mak
     echo "QEMU_GA_MSI_ARCH=${QEMU_GA_MSI_ARCH}" >> $config_host_mak
@@ -6641,6 +6684,9 @@ fi
 if supported_hvf_target $target; then
     echo "CONFIG_HVF=y" >> $config_target_mak
 fi
+if supported_whpx_target $target; then
+    echo "CONFIG_WHPX=y" >> $config_target_mak
+fi
 if test "$target_bigendian" = "yes" ; then
   echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
 fi
diff --git a/qemu-options.hx b/qemu-options.hx
index 678181c..8c8f132 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -31,7 +31,7 @@ DEF("machine", HAS_ARG, QEMU_OPTION_machine, \
     "-machine [type=]name[,prop[=value][,...]]\n"
     "                selects emulated machine ('-machine help' for list)\n"
     "                property accel=accel1[:accel2[:...]] selects 
accelerator\n"
-    "                supported accelerators are kvm, xen, hax, hvf or tcg 
(default: tcg)\n"
+    "                supported accelerators are kvm, xen, hax, hvf, whpx or 
tcg (default: tcg)\n"
     "                kernel_irqchip=on|off|split controls accelerated irqchip 
support (default=off)\n"
     "                vmport=on|off|auto controls emulation of vmport (default: 
auto)\n"
     "                kvm_shadow_mem=size of KVM shadow MMU in bytes\n"
@@ -66,7 +66,7 @@ Supported machine properties are:
 @table @option
 @item address@hidden:@var{accels2}[:...]]
 This is used to enable an accelerator. Depending on the target architecture,
-kvm, xen, hax, hvf or tcg can be available. By default, tcg is used. If there 
is
+kvm, xen, hax, hvf, whpx or tcg can be available. By default, tcg is used. If 
there is
 more than one accelerator specified, the next one is used if the previous one
 fails to initialize.
 @item kernel_irqchip=on|off
@@ -126,13 +126,13 @@ ETEXI
 
 DEF("accel", HAS_ARG, QEMU_OPTION_accel,
     "-accel [accel=]accelerator[,thread=single|multi]\n"
-    "                select accelerator (kvm, xen, hax, hvf or tcg; use 'help' 
for a list)\n"
+    "                select accelerator (kvm, xen, hax, hvf, whpx or tcg; use 
'help' for a list)\n"
     "                thread=single|multi (enable multi-threaded TCG)", 
QEMU_ARCH_ALL)
 STEXI
 @item -accel @var{name}[,address@hidden,...]]
 @findex -accel
 This is used to enable an accelerator. Depending on the target architecture,
-kvm, xen, hax, hvf or tcg can be available. By default, tcg is used. If there 
is
+kvm, xen, hax, hvf, whpx or tcg can be available. By default, tcg is used. If 
there is
 more than one accelerator specified, the next one is used if the previous one
 fails to initialize.
 @table @option
-- 
2.7.4