qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v4 00/14] Initial i.MX7 support


From: Andrey Smirnov
Subject: [Qemu-devel] [PATCH v4 00/14] Initial i.MX7 support
Date: Mon, 15 Jan 2018 17:36:55 -0800

Hi everyone,

This v4 of the patch series containing the work that I've done in
order to enable support for i.MX7 emulation in QEMU.

*NOTE*: Patches 1 and 2 are provided for the sake of completness and
        are going to have to be adapted once Philippe's SD changes
        land in master. As such, they are NOT ready to be
        accepted/merged.

As the one before last commit in the series states the supported i.MX7
features are:

    * up to 2 Cortex A9 cores (SMP works with PSCI)
    * A7 MPCORE (identical to A15 MPCORE)
    * 4 GPTs modules
    * 7 GPIO controllers
    * 2 IOMUXC controllers
    * 1 CCM module
    * 1 SVNS module
    * 1 SRC module
    * 1 GPCv2 controller
    * 4 eCSPI controllers
    * 4 I2C controllers
    * 7 i.MX UART controllers
    * 2 FlexCAN controllers
    * 2 Ethernet controllers (FEC)
    * 3 SD controllers (USDHC)
    * 4 WDT modules
    * 1 SDMA module
    * 1 GPR module
    * 2 USBMISC modules
    * 2 ADC modules
    * 1 PCIe controller
    * 3 USB controllers
    * 1 LCD controller
    * 1 ARMv7 DAP IP block

Feedback is welcome!

Changes since [v3]:

    - Changes to FEC were split into a separate set and merged to master

    - Patchest is rebased on latest master

    - Converted to use PSCI DT fixup code that is shared with virt
      platform (now relocated to live in arm/boot.c)

    - Large number of dummy block were converted to use
      create_unimplemented_device() as opposed to its own dedicated
      type

    - Incorporated varios small feedback items

    - Collected Reviewed-by tags from Peter

Changes since [v2]:

    - Added stubs for more blocks that were causing memory
      transactions when booting Linux guest as were revealed by
      additional testing of the patchest

    - Added proper USB emulation code, so now it should be possible to
      emulated guest's USB bus

Changes since [v1]:

    - Patchset no longer relies on "ignore_memory_transaction_failures = false"
      for its functionality

    - As a consequnce of implementing the above a number of patches
      implementing dummy IP block emulation as well as PCIe emulation
      patches that I alluded to in [v1] are now included in this patch
      series

    - "has_el3" property is no longer being set to "false" as a part
      of intialization of A7 CPU. I couldn't reproduce the issues that
      I thought I was having, so I just dropped that code.

    - A number of smaller feedback items from Peter and other has been
      incorporated into the patches.


Thanks,
Andrey Smirnov

[v3] https://lists.gnu.org/archive/html/qemu-devel/2017-11/msg04236.html
[v2] https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg05516.html
[v1] https://lists.gnu.org/archive/html/qemu-devel/2017-09/msg04770.html

Andrey Smirnov (14):
  sdhci: Add i.MX specific subtype of SDHCI
  hw: i.MX: Convert i.MX6 to use TYPE_IMX_USDHC
  i.MX: Add code to emulate i.MX7 CCM, PMU and ANALOG IP blocks
  i.MX: Add code to emulate i.MX2 watchdog IP block
  i.MX: Add code to emulate i.MX7 SNVS IP-block
  i.MX: Add code to emulate GPCv2 IP block
  i.MX: Add i.MX7 GPT variant
  i.MX: Add implementation of i.MX7 GPR IP block
  pci: Add support for Designware IP block
  usb: Add basic code to emulate Chipidea USB IP
  ARM: Add basic code to emulate A7MPCore DAP block
  i.MX: Add i.MX7 SOC implementation.
  hw/arm: Move virt's PSCI DT fixup code to arm/boot.c
  Implement support for i.MX7 Sabre board

 default-configs/arm-softmmu.mak  |   3 +
 hw/arm/Makefile.objs             |   5 +-
 hw/arm/boot.c                    |  65 ++++
 hw/arm/coresight.c               | 120 ++++++++
 hw/arm/fsl-imx6.c                |   2 +-
 hw/arm/fsl-imx7.c                | 583 ++++++++++++++++++++++++++++++++++++
 hw/arm/mcimx7d-sabre.c           |  90 ++++++
 hw/arm/virt.c                    |  61 ----
 hw/intc/Makefile.objs            |   2 +-
 hw/intc/imx_gpcv2.c              | 125 ++++++++
 hw/misc/Makefile.objs            |   4 +
 hw/misc/imx2_wdt.c               |  89 ++++++
 hw/misc/imx7_ccm.c               | 277 ++++++++++++++++++
 hw/misc/imx7_gpr.c               | 119 ++++++++
 hw/misc/imx7_snvs.c              |  83 ++++++
 hw/pci-host/Makefile.objs        |   2 +
 hw/pci-host/designware.c         | 618 +++++++++++++++++++++++++++++++++++++++
 hw/sd/sdhci-internal.h           |  19 ++
 hw/sd/sdhci.c                    | 228 ++++++++++++++-
 hw/timer/imx_gpt.c               |  25 ++
 hw/usb/Makefile.objs             |   1 +
 hw/usb/chipidea.c                | 176 +++++++++++
 include/hw/arm/coresight.h       |  24 ++
 include/hw/arm/fsl-imx7.h        | 223 ++++++++++++++
 include/hw/intc/imx_gpcv2.h      |  22 ++
 include/hw/misc/imx2_wdt.h       |  33 +++
 include/hw/misc/imx7_ccm.h       | 139 +++++++++
 include/hw/misc/imx7_gpr.h       |  28 ++
 include/hw/misc/imx7_snvs.h      |  35 +++
 include/hw/pci-host/designware.h |  93 ++++++
 include/hw/pci/pci_ids.h         |   2 +
 include/hw/sd/sdhci.h            |  14 +
 include/hw/timer/imx_gpt.h       |   1 +
 include/hw/usb/chipidea.h        |  16 +
 34 files changed, 3261 insertions(+), 66 deletions(-)
 create mode 100644 hw/arm/coresight.c
 create mode 100644 hw/arm/fsl-imx7.c
 create mode 100644 hw/arm/mcimx7d-sabre.c
 create mode 100644 hw/intc/imx_gpcv2.c
 create mode 100644 hw/misc/imx2_wdt.c
 create mode 100644 hw/misc/imx7_ccm.c
 create mode 100644 hw/misc/imx7_gpr.c
 create mode 100644 hw/misc/imx7_snvs.c
 create mode 100644 hw/pci-host/designware.c
 create mode 100644 hw/usb/chipidea.c
 create mode 100644 include/hw/arm/coresight.h
 create mode 100644 include/hw/arm/fsl-imx7.h
 create mode 100644 include/hw/intc/imx_gpcv2.h
 create mode 100644 include/hw/misc/imx2_wdt.h
 create mode 100644 include/hw/misc/imx7_ccm.h
 create mode 100644 include/hw/misc/imx7_gpr.h
 create mode 100644 include/hw/misc/imx7_snvs.h
 create mode 100644 include/hw/pci-host/designware.h
 create mode 100644 include/hw/usb/chipidea.h

-- 
2.14.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]