qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v5 0/9] Add the ZynqMP PMU and IPI


From: Alistair Francis
Subject: [Qemu-devel] [PATCH v5 0/9] Add the ZynqMP PMU and IPI
Date: Tue, 16 Jan 2018 15:22:18 -0800

This series adds the ZynqMP Power Management Unit (PMU) machine with basic
functionality.

The machine only has the
 - CPU
 - Memory
 - Interrupt controller
 - IPI device

connected, but that is enough to run some of the ROM and firmware
code on the machine

The series also adds the IPI device and connects it to the ZynqMP ARM
side and the ZynqMP PMU. These IPI devices don't connect between the ARM
and MicroBlaze instances though.

V5:
 - Fix clang makecheck error
 - Rebase on master
V4:
 - Rename the ZCU102 machine to just ZynqMP
 - Rename the PMC SoC to "xlnx,zynqmp-pmu-soc"
 - Move the IPI device to the machine instead of the SoC
V3:
 - Add the interrupt controller
 - Replace some of the error_fatals with errp
 - Fix the PMU CPU name



Alistair Francis (9):
  microblaze: boot.c: Don't try to find NULL pointer
  xlnx-zynqmp-pmu: Initial commit of the ZynqMP PMU
  xlnx-zynqmp-pmu: Add the CPU and memory
  aarch64-softmmu.mak: Use an ARM specific config
  xlnx-pmu-iomod-intc: Add the PMU Interrupt controller
  xlnx-zynqmp-pmu: Connect the PMU interrupt controller
  xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device
  xlnx-zynqmp-pmu: Connect the IPI device to the PMU
  xlnx-zynqmp: Connect the IPI device to the ZynqMP SoC

 default-configs/aarch64-softmmu.mak    |   1 +
 default-configs/microblaze-softmmu.mak |   1 +
 hw/arm/Makefile.objs                   |   2 +-
 hw/arm/xlnx-zynqmp.c                   |  14 +
 hw/display/Makefile.objs               |   2 +-
 hw/dma/Makefile.objs                   |   1 +
 hw/intc/Makefile.objs                  |   2 +
 hw/intc/xlnx-pmu-iomod-intc.c          | 554 +++++++++++++++++++++++++++++++++
 hw/intc/xlnx-zynqmp-ipi.c              | 377 ++++++++++++++++++++++
 hw/microblaze/Makefile.objs            |   1 +
 hw/microblaze/boot.c                   |   2 +-
 hw/microblaze/xlnx-zynqmp-pmu.c        | 204 ++++++++++++
 include/hw/arm/xlnx-zynqmp.h           |   2 +
 include/hw/intc/xlnx-pmu-iomod-intc.h  |  58 ++++
 include/hw/intc/xlnx-zynqmp-ipi.h      |  57 ++++
 15 files changed, 1275 insertions(+), 3 deletions(-)
 create mode 100644 hw/intc/xlnx-pmu-iomod-intc.c
 create mode 100644 hw/intc/xlnx-zynqmp-ipi.c
 create mode 100644 hw/microblaze/xlnx-zynqmp-pmu.c
 create mode 100644 include/hw/intc/xlnx-pmu-iomod-intc.h
 create mode 100644 include/hw/intc/xlnx-zynqmp-ipi.h

--
2.14.1

This email and any attachments are intended for the sole use of the named 
recipient(s) and contain(s) confidential information that may be proprietary, 
privileged or copyrighted under applicable law. If you are not the intended 
recipient, do not read, copy, or forward this email message or any attachments. 
Delete this email message and any attachments immediately.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]