Re: [Qemu-devel] [PATCH v5 0/9] Add the ZynqMP PMU and IPI

[Alistair Francis]

On Tue, Jan 16, 2018 at 3:22 PM, Alistair Francis
<address@hidden> wrote:
>
> This series adds the ZynqMP Power Management Unit (PMU) machine with basic
> functionality.
>
> The machine only has the
>  - CPU
>  - Memory
>  - Interrupt controller
>  - IPI device
>
> connected, but that is enough to run some of the ROM and firmware
> code on the machine
>
> The series also adds the IPI device and connects it to the ZynqMP ARM
> side and the ZynqMP PMU. These IPI devices don't connect between the ARM
> and MicroBlaze instances though.
>
> V5:
>  - Fix clang makecheck error
>  - Rebase on master
> V4:
>  - Rename the ZCU102 machine to just ZynqMP
>  - Rename the PMC SoC to "xlnx,zynqmp-pmu-soc"
>  - Move the IPI device to the machine instead of the SoC
> V3:
>  - Add the interrupt controller
>  - Replace some of the error_fatals with errp
>  - Fix the PMU CPU name
>
>
>
> Alistair Francis (9):
>   microblaze: boot.c: Don't try to find NULL pointer
>   xlnx-zynqmp-pmu: Initial commit of the ZynqMP PMU
>   xlnx-zynqmp-pmu: Add the CPU and memory
>   aarch64-softmmu.mak: Use an ARM specific config
>   xlnx-pmu-iomod-intc: Add the PMU Interrupt controller
>   xlnx-zynqmp-pmu: Connect the PMU interrupt controller
>   xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device
>   xlnx-zynqmp-pmu: Connect the IPI device to the PMU
>   xlnx-zynqmp: Connect the IPI device to the ZynqMP SoC
>
>  default-configs/aarch64-softmmu.mak    |   1 +
>  default-configs/microblaze-softmmu.mak |   1 +
>  hw/arm/Makefile.objs                   |   2 +-
>  hw/arm/xlnx-zynqmp.c                   |  14 +
>  hw/display/Makefile.objs               |   2 +-
>  hw/dma/Makefile.objs                   |   1 +
>  hw/intc/Makefile.objs                  |   2 +
>  hw/intc/xlnx-pmu-iomod-intc.c          | 554 
> +++++++++++++++++++++++++++++++++
>  hw/intc/xlnx-zynqmp-ipi.c              | 377 ++++++++++++++++++++++
>  hw/microblaze/Makefile.objs            |   1 +
>  hw/microblaze/boot.c                   |   2 +-
>  hw/microblaze/xlnx-zynqmp-pmu.c        | 204 ++++++++++++
>  include/hw/arm/xlnx-zynqmp.h           |   2 +
>  include/hw/intc/xlnx-pmu-iomod-intc.h  |  58 ++++
>  include/hw/intc/xlnx-zynqmp-ipi.h      |  57 ++++
>  15 files changed, 1275 insertions(+), 3 deletions(-)
>  create mode 100644 hw/intc/xlnx-pmu-iomod-intc.c
>  create mode 100644 hw/intc/xlnx-zynqmp-ipi.c
>  create mode 100644 hw/microblaze/xlnx-zynqmp-pmu.c
>  create mode 100644 include/hw/intc/xlnx-pmu-iomod-intc.h
>  create mode 100644 include/hw/intc/xlnx-zynqmp-ipi.h
>
> --
> 2.14.1
>
> This email and any attachments are intended for the sole use of the named 
> recipient(s) and contain(s) confidential information that may be proprietary, 
> privileged or copyrighted under applicable law. If you are not the intended 
> recipient, do not read, copy, or forward this email message or any 
> attachments. Delete this email message and any attachments immediately.

ARGH! Apparently Xilinx started this crap up again. I didn't realise
this is on all my emails. I'll work on getting it removed.

Alistair