[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v3 29/39] qcow2: Prepare expand_zero_clusters_in_l1(
From: |
Alberto Garcia |
Subject: |
[Qemu-devel] [PATCH v3 29/39] qcow2: Prepare expand_zero_clusters_in_l1() for adding L2 slice support |
Date: |
Fri, 26 Jan 2018 16:59:56 +0200 |
Adding support for L2 slices to expand_zero_clusters_in_l1() needs
(among other things) an extra loop that iterates over all slices of
each L2 table.
Putting all changes in one patch would make it hard to read because
all semantic changes would be mixed with pure indentation changes.
To make things easier this patch simply creates a new block and
changes the indentation of all lines of code inside it. Thus, all
modifications in this patch are cosmetic. There are no semantic
changes and no variables are renamed yet. The next patch will take
care of that.
Signed-off-by: Alberto Garcia <address@hidden>
---
block/qcow2-cluster.c | 187 ++++++++++++++++++++++++++------------------------
1 file changed, 96 insertions(+), 91 deletions(-)
diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 1338485184..6042ec69e3 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -1905,118 +1905,123 @@ static int
expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table,
goto fail;
}
- if (is_active_l1) {
- /* get active L2 tables from cache */
- ret = qcow2_cache_get(bs, s->l2_table_cache, l2_offset,
- (void **)&l2_table);
- } else {
- /* load inactive L2 tables from disk */
- ret = bdrv_read(bs->file, l2_offset / BDRV_SECTOR_SIZE,
- (void *)l2_table, s->cluster_sectors);
- }
- if (ret < 0) {
- goto fail;
- }
-
- for (j = 0; j < s->l2_size; j++) {
- uint64_t l2_entry = be64_to_cpu(l2_table[j]);
- int64_t offset = l2_entry & L2E_OFFSET_MASK;
- QCow2ClusterType cluster_type = qcow2_get_cluster_type(l2_entry);
-
- if (cluster_type != QCOW2_CLUSTER_ZERO_PLAIN &&
- cluster_type != QCOW2_CLUSTER_ZERO_ALLOC) {
- continue;
+ {
+ if (is_active_l1) {
+ /* get active L2 tables from cache */
+ ret = qcow2_cache_get(bs, s->l2_table_cache, l2_offset,
+ (void **)&l2_table);
+ } else {
+ /* load inactive L2 tables from disk */
+ ret = bdrv_read(bs->file, l2_offset / BDRV_SECTOR_SIZE,
+ (void *)l2_table, s->cluster_sectors);
}
+ if (ret < 0) {
+ goto fail;
+ }
+
+ for (j = 0; j < s->l2_size; j++) {
+ uint64_t l2_entry = be64_to_cpu(l2_table[j]);
+ int64_t offset = l2_entry & L2E_OFFSET_MASK;
+ QCow2ClusterType cluster_type =
+ qcow2_get_cluster_type(l2_entry);
- if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
- if (!bs->backing) {
- /* not backed; therefore we can simply deallocate the
- * cluster */
- l2_table[j] = 0;
- l2_dirty = true;
+ if (cluster_type != QCOW2_CLUSTER_ZERO_PLAIN &&
+ cluster_type != QCOW2_CLUSTER_ZERO_ALLOC) {
continue;
}
- offset = qcow2_alloc_clusters(bs, s->cluster_size);
- if (offset < 0) {
- ret = offset;
- goto fail;
- }
+ if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
+ if (!bs->backing) {
+ /* not backed; therefore we can simply deallocate the
+ * cluster */
+ l2_table[j] = 0;
+ l2_dirty = true;
+ continue;
+ }
- if (l2_refcount > 1) {
- /* For shared L2 tables, set the refcount accordingly (it
is
- * already 1 and needs to be l2_refcount) */
- ret = qcow2_update_cluster_refcount(bs,
- offset >> s->cluster_bits,
+ offset = qcow2_alloc_clusters(bs, s->cluster_size);
+ if (offset < 0) {
+ ret = offset;
+ goto fail;
+ }
+
+ if (l2_refcount > 1) {
+ /* For shared L2 tables, set the refcount accordingly
+ * (it is already 1 and needs to be l2_refcount) */
+ ret = qcow2_update_cluster_refcount(
+ bs, offset >> s->cluster_bits,
refcount_diff(1, l2_refcount), false,
QCOW2_DISCARD_OTHER);
- if (ret < 0) {
+ if (ret < 0) {
+ qcow2_free_clusters(bs, offset, s->cluster_size,
+ QCOW2_DISCARD_OTHER);
+ goto fail;
+ }
+ }
+ }
+
+ if (offset_into_cluster(s, offset)) {
+ qcow2_signal_corruption(
+ bs, true, -1, -1,
+ "Cluster allocation offset "
+ "%#" PRIx64 " unaligned (L2 offset: %#"
+ PRIx64 ", L2 index: %#x)", offset,
+ l2_offset, j);
+ if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
qcow2_free_clusters(bs, offset, s->cluster_size,
- QCOW2_DISCARD_OTHER);
- goto fail;
+ QCOW2_DISCARD_ALWAYS);
}
+ ret = -EIO;
+ goto fail;
}
- }
- if (offset_into_cluster(s, offset)) {
- qcow2_signal_corruption(bs, true, -1, -1,
- "Cluster allocation offset "
- "%#" PRIx64 " unaligned (L2 offset: %#"
- PRIx64 ", L2 index: %#x)", offset,
- l2_offset, j);
- if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
- qcow2_free_clusters(bs, offset, s->cluster_size,
- QCOW2_DISCARD_ALWAYS);
+ ret = qcow2_pre_write_overlap_check(bs, 0, offset,
+ s->cluster_size);
+ if (ret < 0) {
+ if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
+ qcow2_free_clusters(bs, offset, s->cluster_size,
+ QCOW2_DISCARD_ALWAYS);
+ }
+ goto fail;
}
- ret = -EIO;
- goto fail;
- }
- ret = qcow2_pre_write_overlap_check(bs, 0, offset,
s->cluster_size);
- if (ret < 0) {
- if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
- qcow2_free_clusters(bs, offset, s->cluster_size,
- QCOW2_DISCARD_ALWAYS);
+ ret = bdrv_pwrite_zeroes(bs->file, offset, s->cluster_size, 0);
+ if (ret < 0) {
+ if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
+ qcow2_free_clusters(bs, offset, s->cluster_size,
+ QCOW2_DISCARD_ALWAYS);
+ }
+ goto fail;
}
- goto fail;
- }
- ret = bdrv_pwrite_zeroes(bs->file, offset, s->cluster_size, 0);
- if (ret < 0) {
- if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
- qcow2_free_clusters(bs, offset, s->cluster_size,
- QCOW2_DISCARD_ALWAYS);
+ if (l2_refcount == 1) {
+ l2_table[j] = cpu_to_be64(offset | QCOW_OFLAG_COPIED);
+ } else {
+ l2_table[j] = cpu_to_be64(offset);
}
- goto fail;
+ l2_dirty = true;
}
- if (l2_refcount == 1) {
- l2_table[j] = cpu_to_be64(offset | QCOW_OFLAG_COPIED);
+ if (is_active_l1) {
+ if (l2_dirty) {
+ qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_table);
+ qcow2_cache_depends_on_flush(s->l2_table_cache);
+ }
+ qcow2_cache_put(s->l2_table_cache, (void **) &l2_table);
} else {
- l2_table[j] = cpu_to_be64(offset);
- }
- l2_dirty = true;
- }
+ if (l2_dirty) {
+ ret = qcow2_pre_write_overlap_check(
+ bs, QCOW2_OL_INACTIVE_L2 | QCOW2_OL_ACTIVE_L2,
+ l2_offset, s->cluster_size);
+ if (ret < 0) {
+ goto fail;
+ }
- if (is_active_l1) {
- if (l2_dirty) {
- qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_table);
- qcow2_cache_depends_on_flush(s->l2_table_cache);
- }
- qcow2_cache_put(s->l2_table_cache, (void **) &l2_table);
- } else {
- if (l2_dirty) {
- ret = qcow2_pre_write_overlap_check(bs,
- QCOW2_OL_INACTIVE_L2 | QCOW2_OL_ACTIVE_L2, l2_offset,
- s->cluster_size);
- if (ret < 0) {
- goto fail;
- }
-
- ret = bdrv_write(bs->file, l2_offset / BDRV_SECTOR_SIZE,
- (void *)l2_table, s->cluster_sectors);
- if (ret < 0) {
- goto fail;
+ ret = bdrv_write(bs->file, l2_offset / BDRV_SECTOR_SIZE,
+ (void *)l2_table, s->cluster_sectors);
+ if (ret < 0) {
+ goto fail;
+ }
}
}
}
--
2.11.0
- [Qemu-devel] [PATCH v3 07/39] qcow2: Remove BDS parameter from qcow2_cache_put(), (continued)
- [Qemu-devel] [PATCH v3 07/39] qcow2: Remove BDS parameter from qcow2_cache_put(), Alberto Garcia, 2018/01/26
- [Qemu-devel] [PATCH v3 36/39] qcow2: Allow configuring the L2 slice size, Alberto Garcia, 2018/01/26
- [Qemu-devel] [PATCH v3 30/39] qcow2: Update expand_zero_clusters_in_l1() to support L2 slices, Alberto Garcia, 2018/01/26
- [Qemu-devel] [PATCH v3 24/39] qcow2: Update discard_single_l2() to support L2 slices, Alberto Garcia, 2018/01/26
- [Qemu-devel] [PATCH v3 22/39] qcow2: Update handle_copied() to support L2 slices, Alberto Garcia, 2018/01/26
- [Qemu-devel] [PATCH v3 21/39] qcow2: Update qcow2_alloc_cluster_link_l2() to support L2 slices, Alberto Garcia, 2018/01/26
- [Qemu-devel] [PATCH v3 05/39] qcow2: Remove BDS parameter from qcow2_cache_table_release(), Alberto Garcia, 2018/01/26
- [Qemu-devel] [PATCH v3 14/39] qcow2: Add offset_to_l2_slice_index(), Alberto Garcia, 2018/01/26
- [Qemu-devel] [PATCH v3 33/39] qcow2: Rename l2_table in count_contiguous_clusters(), Alberto Garcia, 2018/01/26
- [Qemu-devel] [PATCH v3 29/39] qcow2: Prepare expand_zero_clusters_in_l1() for adding L2 slice support,
Alberto Garcia <=
- [Qemu-devel] [PATCH v3 23/39] qcow2: Update handle_alloc() to support L2 slices, Alberto Garcia, 2018/01/26
- [Qemu-devel] [PATCH v3 26/39] qcow2: Prepare qcow2_update_snapshot_refcount() for adding L2 slice support, Alberto Garcia, 2018/01/26