qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [Qemu-arm] [PATCH v1 3/3] raspi: Add "raspi3" machine t


From: Philippe Mathieu-Daudé
Subject: Re: [Qemu-devel] [Qemu-arm] [PATCH v1 3/3] raspi: Add "raspi3" machine type
Date: Thu, 15 Feb 2018 10:14:16 -0300
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.6.0

On 02/15/2018 09:49 AM, Philippe Mathieu-Daudé wrote:
> On 02/15/2018 09:39 AM, Peter Maydell wrote:
>> On 8 February 2018 at 05:50, Pekka Enberg <address@hidden> wrote:
>>> This patch adds a "raspi3" machine type, which can now be selected as
>>> the machine to run on by users via the "-M" command line option to QEMU.
>>>
>>> The machine type does *not* ignore memory transaction failures so we
>>> likely need to add some dummy devices later when people run something
>>> more complicated than what I'm using for testing.
>>>
>>> Signed-off-by: Pekka Enberg <address@hidden>
>>> ---
>>>  hw/arm/raspi.c | 21 +++++++++++++++++++++
>>>  1 file changed, 21 insertions(+)
>>>
>>> diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
>>> index 66fe10e376..048ff23a51 100644
>>> --- a/hw/arm/raspi.c
>>> +++ b/hw/arm/raspi.c
>>> @@ -187,3 +187,24 @@ static void raspi2_machine_init(MachineClass *mc)
>>>      mc->ignore_memory_transaction_failures = true;
>>>  };
>>>  DEFINE_MACHINE("raspi2", raspi2_machine_init)
>>> +
>>> +static void raspi3_init(MachineState *machine)
>>> +{
>>> +    raspi_init(machine, 3);
>>> +}
>>> +
>>> +static void raspi3_machine_init(MachineClass *mc)
>>> +{
>>> +    mc->desc = "Raspberry Pi 3";
>>> +    mc->init = raspi3_init;
>>> +    mc->block_default_type = IF_SD;
>>> +    mc->no_parallel = 1;
>>> +    mc->no_floppy = 1;
>>> +    mc->no_cdrom = 1;

Now I remember why I hesitated with this patch,

This part {

>>> +    mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a53");
>>> +    mc->max_cpus = BCM2836_NCPUS;
>>> +    mc->min_cpus = BCM2836_NCPUS;
>>> +    mc->default_cpus = BCM2836_NCPUS;

} is the BCM2837 SoC, very similar to the BCM2836.

>>> +    mc->default_ram_size = 1024 * 1024 * 1024;
>>> +}
>>> +DEFINE_MACHINE("raspi3", raspi3_machine_init)
>>
>> Hi. This patch breaks "make check", because it adds the raspi3
>> to the arm-softmmu (32-bit guest CPUs only) build, where the
>> cortex-a53 CPU doesn't exist:
>>
>> e104462:xenial:qemu$ ./build/x86/arm-softmmu/qemu-system-arm -M raspi3
>> **
>> ERROR:/home/petmay01/linaro/qemu-from-laptop/qemu/qom/object.c:372:object_initialize_with_type:
>> assertion failed: (type != NULL)
>> Aborted (core dumped)
>>
>> The usual way we avoid this is that 64-bit only boards are
>> in their own source file, which is only compiled if the right
>> CONFIG_FOO is set by default-configs/aarch64-softmmu.mak.
>> In this case splitting the 64-bit board into its own source
>> file would be weird and awkward, so the simple thing is to
>> guard the raspi3 bits with #ifdef TARGET_AARCH64.
> 
> Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
> 
>>
>> (You might think we could define a CONFIG_RASPI3 in
>> aarch64-softmmu.mak and #ifdef on it, but for some reason
>> we don't expose those CONFIG_* to C code, possibly just because
>> we've never needed to in the past...)
>>
>> Since this was the only code change needed, I'm just going to make
>> it and apply the patchset to target-arm.next, rather than ask
>> you to do a respin. (There was also a stray space-at-end-of-line
>> in patch 2 which checkpatch grumbles about; I'll fix that up too.)
>>
>> thanks
>> -- PMM
>>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]