[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v1 3/3] raspi: Add "raspi3" machine type

From: Pekka Enberg
Subject: Re: [Qemu-devel] [PATCH v1 3/3] raspi: Add "raspi3" machine type
Date: Fri, 16 Feb 2018 09:08:21 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.5.2


On 02/15/2018 02:39 PM, Peter Maydell wrote:
On 8 February 2018 at 05:50, Pekka Enberg <address@hidden> wrote:
This patch adds a "raspi3" machine type, which can now be selected as
the machine to run on by users via the "-M" command line option to QEMU.

The machine type does *not* ignore memory transaction failures so we
likely need to add some dummy devices later when people run something
more complicated than what I'm using for testing.

Signed-off-by: Pekka Enberg <address@hidden>
  hw/arm/raspi.c | 21 +++++++++++++++++++++
  1 file changed, 21 insertions(+)

diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index 66fe10e376..048ff23a51 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -187,3 +187,24 @@ static void raspi2_machine_init(MachineClass *mc)
      mc->ignore_memory_transaction_failures = true;
  DEFINE_MACHINE("raspi2", raspi2_machine_init)
+static void raspi3_init(MachineState *machine)
+    raspi_init(machine, 3);
+static void raspi3_machine_init(MachineClass *mc)
+    mc->desc = "Raspberry Pi 3";
+    mc->init = raspi3_init;
+    mc->block_default_type = IF_SD;
+    mc->no_parallel = 1;
+    mc->no_floppy = 1;
+    mc->no_cdrom = 1;
+    mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a53");
+    mc->max_cpus = BCM2836_NCPUS;
+    mc->min_cpus = BCM2836_NCPUS;
+    mc->default_cpus = BCM2836_NCPUS;
+    mc->default_ram_size = 1024 * 1024 * 1024;
+DEFINE_MACHINE("raspi3", raspi3_machine_init)

Hi. This patch breaks "make check", because it adds the raspi3
to the arm-softmmu (32-bit guest CPUs only) build, where the
cortex-a53 CPU doesn't exist:

e104462:xenial:qemu$ ./build/x86/arm-softmmu/qemu-system-arm -M raspi3
assertion failed: (type != NULL)
Aborted (core dumped)

The usual way we avoid this is that 64-bit only boards are
in their own source file, which is only compiled if the right
CONFIG_FOO is set by default-configs/aarch64-softmmu.mak.
In this case splitting the 64-bit board into its own source
file would be weird and awkward, so the simple thing is to
guard the raspi3 bits with #ifdef TARGET_AARCH64.

(You might think we could define a CONFIG_RASPI3 in
aarch64-softmmu.mak and #ifdef on it, but for some reason
we don't expose those CONFIG_* to C code, possibly just because
we've never needed to in the past...)

Since this was the only code change needed, I'm just going to make
it and apply the patchset to target-arm.next, rather than ask
you to do a respin. (There was also a stray space-at-end-of-line
in patch 2 which checkpatch grumbles about; I'll fix that up too.)

Oh, it would have helped if I had actually read the whole thread before sending out v2. If I understood correctly, you only applied the first two patches (sorry about that trailing whitespace!). You therefore can just pick patch 3 from the v2 as the first two patches are unchanged.


- Pekka

reply via email to

[Prev in Thread] Current Thread [Next in Thread]