Re: [Qemu-devel] [PATCH v2] slirp: Add domainname option to slirp's DHCP server

[Benjamin Drung]

Hi Philippe,

Am Freitag, den 16.02.2018, 16:23 -0300 schrieb Philippe Mathieu-Daudé:
> Hi Benjamin,
> 
> On 02/16/2018 02:55 PM, Benjamin Drung wrote:
> > This patch will allow the user to include the domainname option in
> > replies from the built-in DHCP server.
> > 
> > Signed-off-by: Benjamin Drung <address@hidden>
> > ---
> >  net/slirp.c      | 7 ++++---
> >  qapi/net.json    | 4 ++++
> >  qemu-options.hx  | 7 +++++--
> >  slirp/bootp.c    | 8 ++++++++
> >  slirp/libslirp.h | 2 +-
> >  slirp/slirp.c    | 4 +++-
> >  slirp/slirp.h    | 1 +
> >  7 files changed, 26 insertions(+), 7 deletions(-)
> > 
> > diff --git a/net/slirp.c b/net/slirp.c
> > index 8991816bbf..9511ff3bb7 100644
> > --- a/net/slirp.c
> > +++ b/net/slirp.c
> > @@ -157,7 +157,8 @@ static int net_slirp_init(NetClientState *peer,
> > const char *model,
> >                            const char *bootfile, const char
> > *vdhcp_start,
> >                            const char *vnameserver, const char
> > *vnameserver6,
> >                            const char *smb_export, const char
> > *vsmbserver,
> > -                          const char **dnssearch, Error **errp)
> > +                          const char **dnssearch, const char
> > *vdomainname,
> > +                          Error **errp)
> >  {
> >      /* default settings according to historic slirp */
> >      struct in_addr net  = { .s_addr = htonl(0x0a000200) }; /*
> > 10.0.2.0 */
> > @@ -371,7 +372,7 @@ static int net_slirp_init(NetClientState *peer,
> > const char *model,
> >      s->slirp = slirp_init(restricted, ipv4, net, mask, host,
> >                            ipv6, ip6_prefix, vprefix6_len,
> > ip6_host,
> >                            vhostname, tftp_export, bootfile, dhcp,
> > -                          dns, ip6_dns, dnssearch, s);
> > +                          dns, ip6_dns, dnssearch, vdomainname,
> > s);
> >      QTAILQ_INSERT_TAIL(&slirp_stacks, s, entry);
> >  
> >      for (config = slirp_configs; config; config = config->next) {
> > @@ -958,7 +959,7 @@ int net_init_slirp(const Netdev *netdev, const
> > char *name,
> >                           user->ipv6_host, user->hostname, user-
> > >tftp,
> >                           user->bootfile, user->dhcpstart,
> >                           user->dns, user->ipv6_dns, user->smb,
> > -                         user->smbserver, dnssearch, errp);
> > +                         user->smbserver, dnssearch, user-
> > >domainname, errp);
> >  
> >      while (slirp_configs) {
> >          config = slirp_configs;
> > diff --git a/qapi/net.json b/qapi/net.json
> > index 1238ba5de1..9dfd34cafa 100644
> > --- a/qapi/net.json
> > +++ b/qapi/net.json
> > @@ -160,6 +160,9 @@
> >  # @dnssearch: list of DNS suffixes to search, passed as DHCP
> > option
> >  #             to the guest
> >  #
> > +# @domainname: guest-visible domain name of the virtual nameserver
> > +#              (since 2.12)
> > +#
> >  # @ipv6-prefix: IPv6 network prefix (default is fec0::) (since
> >  #               2.6). The network prefix is given in the usual
> >  #               hexadecimal IPv6 address notation.
> > @@ -197,6 +200,7 @@
> >      '*dhcpstart': 'str',
> >      '*dns':       'str',
> >      '*dnssearch': ['String'],
> > +    '*domainname': 'str',
> >      '*ipv6-prefix':      'str',
> >      '*ipv6-prefixlen':   'int',
> >      '*ipv6-host':        'str',
> > diff --git a/qemu-options.hx b/qemu-options.hx
> > index 5050a49a5e..06983db7be 100644
> > --- a/qemu-options.hx
> > +++ b/qemu-options.hx
> > @@ -1906,8 +1906,8 @@ DEF("netdev", HAS_ARG, QEMU_OPTION_netdev,
> >      "-netdev
> > user,id=str[,ipv4[=on|off]][,net=addr[/mask]][,host=addr]\n"
> >      "         [,ipv6[=on|off]][,ipv6-net=addr[/int]][,ipv6-
> > host=addr]\n"
> >      "         [,restrict=on|off][,hostname=host][,dhcpstart=addr]\
> > n"
> > -    "         [,dns=addr][,ipv6-
> > dns=addr][,dnssearch=domain][,tftp=dir]\n"
> > -    "         [,bootfile=f][,hostfwd=rule][,guestfwd=rule]"
> > +    "         [,dns=addr][,ipv6-
> > dns=addr][,dnssearch=domain][,domainname=domain]\n"
> > +    "         [,tftp=dir][,bootfile=f][,hostfwd=rule][,guestfwd=ru
> > le]"
> >  #ifndef _WIN32
> >                                               "[,smb=dir[,smbserver
> > =addr]]\n"
> >  #endif
> > @@ -2116,6 +2116,9 @@ Example:
> >  qemu -net user,dnssearch=mgmt.example.org,dnssearch=example.org
> > [...]
> >  @end example
> >  
> > address@hidden address@hidden
> > +Specifies the client domain name reported by the built-in DHCP
> > server.
> > +
> >  @item address@hidden
> >  When using the user mode network stack, activate a built-in TFTP
> >  server. The files in @var{dir} will be exposed as the root of a
> > TFTP server.
> > diff --git a/slirp/bootp.c b/slirp/bootp.c
> > index 5dd1a415b5..91896f7400 100644
> > --- a/slirp/bootp.c
> > +++ b/slirp/bootp.c
> > @@ -298,6 +298,14 @@ static void bootp_reply(Slirp *slirp, const
> > struct bootp_t *bp)
> >              q += val;
> >          }
> >  
> > +        if (*slirp->vdomainname) {
> 
> This is safe but harder to read/review...

I borrowed that logic from client_hostname.

> > +            val = strlen(slirp->vdomainname);
> > +            *q++ = RFC1533_DOMAINNAME;
> > +            *q++ = val;
> > +            memcpy(q, slirp->vdomainname, val);
> > +            q += val;
> > +        }
> > +
> >          if (slirp->vdnssearch) {
> >              size_t spaceleft = sizeof(rbp->bp_vend) - (q - rbp-
> > >bp_vend);
> >              val = slirp->vdnssearch_len;
> > diff --git a/slirp/libslirp.h b/slirp/libslirp.h
> > index 540b3e5903..740408a96e 100644
> > --- a/slirp/libslirp.h
> > +++ b/slirp/libslirp.h
> > @@ -16,7 +16,7 @@ Slirp *slirp_init(int restricted, bool
> > in_enabled, struct in_addr vnetwork,
> >                    const char *tftp_path, const char *bootfile,
> >                    struct in_addr vdhcp_start, struct in_addr
> > vnameserver,
> >                    struct in6_addr vnameserver6, const char
> > **vdnssearch,
> > -                  void *opaque);
> > +                  const char *vdomainname, void *opaque);
> >  void slirp_cleanup(Slirp *slirp);
> >  
> >  void slirp_pollfds_fill(GArray *pollfds, uint32_t *timeout);
> > diff --git a/slirp/slirp.c b/slirp/slirp.c
> > index 1cb6b07004..4f29753444 100644
> > --- a/slirp/slirp.c
> > +++ b/slirp/slirp.c
> > @@ -286,7 +286,7 @@ Slirp *slirp_init(int restricted, bool
> > in_enabled, struct in_addr vnetwork,
> >                    const char *tftp_path, const char *bootfile,
> >                    struct in_addr vdhcp_start, struct in_addr
> > vnameserver,
> >                    struct in6_addr vnameserver6, const char
> > **vdnssearch,
> > -                  void *opaque)
> > +                  const char *vdomainname, void *opaque)
> >  {
> >      Slirp *slirp = g_malloc0(sizeof(Slirp));
> >  
> > @@ -317,6 +317,7 @@ Slirp *slirp_init(int restricted, bool
> > in_enabled, struct in_addr vnetwork,
> >      }
> >      slirp->tftp_prefix = g_strdup(tftp_path);
> >      slirp->bootp_filename = g_strdup(bootfile);
> 
> I'd use this check:
> 
>    if (vdomainname) {
>        if (!*vdomainname) {
>            error_report("'domainname' parameter cannot be empty");
>            exit(EXIT_FAILURE);
>        }

Do we want to bail out if domainname is set to empty instead of just
ignoring an empty domainname?

> > +    slirp->vdomainname = g_strdup(vdomainname);
> 
>    }
> 
> and simply check "if (slirp->vdomainname) { ..." in bootp_reply().
> 
> Regards,
> 
> Phil.
> 
> >      slirp->vdhcp_startaddr = vdhcp_start;
> >      slirp->vnameserver_addr = vnameserver;
> >      slirp->vnameserver_addr6 = vnameserver6;
> > @@ -349,6 +350,7 @@ void slirp_cleanup(Slirp *slirp)
> >      g_free(slirp->vdnssearch);
> >      g_free(slirp->tftp_prefix);
> >      g_free(slirp->bootp_filename);
> > +    g_free(slirp->vdomainname);
> >      g_free(slirp);
> >  }
> >  
> > diff --git a/slirp/slirp.h b/slirp/slirp.h
> > index 06febfc78b..10b410898a 100644
> > --- a/slirp/slirp.h
> > +++ b/slirp/slirp.h
> > @@ -193,6 +193,7 @@ struct Slirp {
> >      char *bootp_filename;
> >      size_t vdnssearch_len;
> >      uint8_t *vdnssearch;
> > +    char *vdomainname;
> >  
> >      /* tcp states */
> >      struct socket tcb;
> > 
> 
> 
-- 
Benjamin Drung
System Developer
Debian & Ubuntu Developer

ProfitBricks GmbH
Greifswalder Str. 207
D - 10405 Berlin

Email: address@hidden
URL: https://www.profitbricks.de

Sitz der Gesellschaft: Berlin
Registergericht: Amtsgericht Charlottenburg, HRB 125506 B
Geschäftsführer: Achim Weiss, Matthias Steinberg

signature.asc
Description: This is a digitally signed message part