[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 0/9] enable numa configuration before machine
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-devel] [PATCH v3 0/9] enable numa configuration before machine_init() from QMP |
Date: |
Tue, 27 Feb 2018 17:36:39 +0100 |
On Fri, 16 Feb 2018 13:37:12 +0100
Igor Mammedov <address@hidden> wrote:
Eric,
Adding you to CC list (git send-mail somehow haven't noticed you in cover
letter).
Could you please look at QAPI/QMP parts of this series.
> v1->v3:
> * introduce PRECONFIG runstate with -preconfig option.
> it's cleaner to manage transitions and do checks
> than reusing existing PRELAUNCH state.
> * extend QAPI schema commands with 'runstates' keyword,
> so that it would be possible to specify in command definition
> when it is valid to execute.
> (python changes a bit hackery, since I have little to
> no idea how it should work)
> * add preconfig QMP and set-numa-node tests
> * make mutually exclusive -preconfig and -incoming options,
> for simplicity sake. Shouldn't be problem as target can
> be starter with pure CLI, since mapping on source is
> already known.
> * Drop HMP part and leave only QMP in preconfig state.
>
>
> Series allows to configure NUMA mapping at runtime using QMP
> interface. For that to happen it introduces a new '-preconfig' CLI option
> which allows to pause QEMU before machine_init() is run and
> adds new set-numa-node QMP command which in conjunction with
> query-hotpluggable-cpus allows to configure NUMA mapping for cpus.
>
> Later we can modify other commands to run early, for example device_add.
> I recall SPAPR had problem when libvirt started QEMU with -S and, while it's
> paused, added CPUs with device_add. Intent was to coldplug CPUs (but at that
> stage it's considered hotplug already), so SPAPR had to work around the issue.
>
> Example of configuration session:
> $QEMU -smp 2 -preconfig ...
>
> QMP:
> # get CPUs layout for current target/machine/CLI
> -> {'execute': 'query-hotpluggable-cpus' }
> <- {'return': [
> {'props': {'core-id': 0, 'thread-id': 0, 'socket-id': 1}, ... },
> {'props': {'core-id': 0, 'thread-id': 0, 'socket-id': 0}, ... }
> ]}
>
> # configure 1st node
> -> {'execute': 'set-numa-node', 'arguments': { 'type': 'node', 'nodeid': 0 }
> }
> <- {'return': {}}
> -> {'execute': 'set-numa-node', 'arguments': { 'type': 'cpu',
> 'node-id': 0, 'core-id': 0, 'thread-id': 0, 'socket-id': 1, }
> }
> <- {'return': {}}
>
> # configure 2nd node
> -> {'execute': 'set-numa-node', 'arguments': { 'type': 'node', 'nodeid': 1 } }
> -> {'execute': 'set-numa-node', 'arguments': { 'type': 'cpu',
> 'node-id': 1, 'core-id': 0, 'thread-id': 0, 'socket-id': 0 }
> }
> <- {'return': {}}
>
> # [optional] verify configuration
> -> {'execute': 'query-hotpluggable-cpus' }
> <- {'return': [
> {'props': {'core-id': 0, 'thread-id': 0, 'node-id': 0, 'socket-id':
> 1}, ... },
> {'props': {'core-id': 0, 'thread-id': 0, 'node-id': 1, 'socket-id':
> 0}, ... }
> ]}
>
>
> Git tree:
> https://github.com/imammedo/qemu.git qmp_preconfig_v3
>
> Ref to v1:
> https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg03583.html
> Message-Id: <address@hidden>
>
> CC: address@hidden
> CC: address@hidden
> CC: address@hidden
> CC: address@hidden
> CC: address@hidden
> CC: address@hidden
> CC: address@hidden
> CC: address@hidden
>
>
> Igor Mammedov (9):
> numa: postpone options post-processing till machine_run_board_init()
> numa: split out NumaOptions parsing into parse_NumaOptions()
> CLI: add -preconfig option
> HMP: disable monitor in preconfig state
> QAPI: allow to specify valid runstates per command
> tests: extend qmp test with pereconfig checks
> QMP: permit query-hotpluggable-cpus in preconfig state
> QMP: add set-numa-node command
> tests: functional tests for QMP command set-numa-node
>
> include/qapi/qmp/dispatch.h | 5 ++-
> include/sysemu/numa.h | 2 +
> include/sysemu/sysemu.h | 1 +
> hw/core/machine.c | 5 ++-
> monitor.c | 32 +++++++++++++--
> numa.c | 66 +++++++++++++++++++-----------
> qapi-schema.json | 32 +++++++++++++--
> qapi/qmp-dispatch.c | 39 ++++++++++++++++++
> qapi/qmp-registry.c | 4 +-
> qapi/run-state.json | 9 ++++-
> qemu-options.hx | 11 +++++
> qmp.c | 5 +++
> scripts/qapi-commands.py | 46 ++++++++++++++++-----
> scripts/qapi-introspect.py | 2 +-
> scripts/qapi.py | 15 ++++---
> scripts/qapi2texi.py | 2 +-
> tests/numa-test.c | 71
> +++++++++++++++++++++++++++++++++
> tests/qapi-schema/doc-good.out | 4 +-
> tests/qapi-schema/ident-with-escape.out | 2 +-
> tests/qapi-schema/indented-expr.out | 4 +-
> tests/qapi-schema/qapi-schema-test.out | 18 ++++-----
> tests/qapi-schema/test-qapi.py | 6 +--
> tests/qmp-test.c | 56 ++++++++++++++++++++++++++
> vl.c | 35 +++++++++++++++-
> 24 files changed, 401 insertions(+), 71 deletions(-)
>
- [Qemu-devel] [PATCH v3 5/9] QAPI: allow to specify valid runstates per command, (continued)
- [Qemu-devel] [PATCH v3 5/9] QAPI: allow to specify valid runstates per command, Igor Mammedov, 2018/02/16
- [Qemu-devel] [PATCH v3 6/9] tests: extend qmp test with pereconfig checks, Igor Mammedov, 2018/02/16
- [Qemu-devel] [PATCH v3 8/9] QMP: add set-numa-node command, Igor Mammedov, 2018/02/16
- [Qemu-devel] [PATCH v3 7/9] QMP: permit query-hotpluggable-cpus in preconfig state, Igor Mammedov, 2018/02/16
- [Qemu-devel] [PATCH v3 9/9] tests: functional tests for QMP command set-numa-node, Igor Mammedov, 2018/02/16
- Re: [Qemu-devel] [PATCH v3 0/9] enable numa configuration before machine_init() from QMP,
Igor Mammedov <=