[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 3/5] hw/gpio: Add the xlnx-pmu-iomod-gpo devi
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [Qemu-devel] [PATCH v2 3/5] hw/gpio: Add the xlnx-pmu-iomod-gpo device |
Date: |
Thu, 1 Mar 2018 14:02:23 -0300 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.6.0 |
Hi Alistair,
On 02/28/2018 07:32 PM, Alistair Francis wrote:
> Signed-off-by: Alistair Francis <address@hidden>
> ---
>
> include/hw/gpio/xlnx-pmu-iomod-gp.h | 52 +++++++++++++
> hw/gpio/xlnx-pmu-iomod-gp.c | 150
> ++++++++++++++++++++++++++++++++++++
> hw/gpio/Makefile.objs | 2 +
> 3 files changed, 204 insertions(+)
> create mode 100644 include/hw/gpio/xlnx-pmu-iomod-gp.h
> create mode 100644 hw/gpio/xlnx-pmu-iomod-gp.c
>
> diff --git a/include/hw/gpio/xlnx-pmu-iomod-gp.h
> b/include/hw/gpio/xlnx-pmu-iomod-gp.h
> new file mode 100644
> index 0000000000..0ee162829b
> --- /dev/null
> +++ b/include/hw/gpio/xlnx-pmu-iomod-gp.h
> @@ -0,0 +1,52 @@
> +/*
> + * QEMU model of Xilinx I/O Module GPO
> + *
> + * Copyright (c) 2013 Xilinx Inc
> + * Written by Edgar E. Iglesias <address@hidden>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> copy
> + * of this software and associated documentation files (the "Software"), to
> deal
> + * in the Software without restriction, including without limitation the
> rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#ifndef HW_XLNX_ZYNQMP_IOMOD_GPIO_H
> +#define HW_XLNX_ZYNQMP_IOMOD_GPIO_H
Maybe HW_XLNX_IOMOD_GPIO_H is enough (removing ZYNQMP), or
HW_XLNX_PMU_IOMOD_GPIO_H is a better naming (using PMU).
(comment valid for the whole file).
> +
> +#include "qemu/osdep.h"
> +
> +#define TYPE_XLNX_ZYNQMP_IOMOD_GPIO "xlnx.pmu_iomodule_gpio"
> +
> +#define XLNX_ZYNQMP_IOMOD_GPIO(obj) \
> + OBJECT_CHECK(XlnxPMUIOGPIO, (obj), TYPE_XLNX_ZYNQMP_IOMOD_GPIO)
> +
> +#define XLNX_ZYNQMP_IOMOD_GPIO_R_MAX (0x00 + 1)
> +
> +typedef struct XlnxPMUIOGPIO {
> + SysBusDevice parent_obj;
> + MemoryRegion iomem;
> +
> + uint32_t size;
> +
> + /* GPO */
> + uint32_t init;
> + qemu_irq outputs[32];
Can you add a definition such XLNX_(PMU_)IOMOD_GPIO_COUNT?
> +
> + uint32_t regs[XLNX_ZYNQMP_IOMOD_GPIO_R_MAX];
> + RegisterInfo regs_info[XLNX_ZYNQMP_IOMOD_GPIO_R_MAX];
> +} XlnxPMUIOGPIO;
> +
> +#endif /* HW_XLNX_ZYNQMP_IOMOD_GPIO_H */
> diff --git a/hw/gpio/xlnx-pmu-iomod-gp.c b/hw/gpio/xlnx-pmu-iomod-gp.c
> new file mode 100644
> index 0000000000..0e45a89b44
> --- /dev/null
> +++ b/hw/gpio/xlnx-pmu-iomod-gp.c
> @@ -0,0 +1,150 @@
> +/*
> + * QEMU model of Xilinx I/O Module GPO
> + *
> + * Copyright (c) 2013 Xilinx Inc
> + * Written by Edgar E. Iglesias <address@hidden>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> copy
> + * of this software and associated documentation files (the "Software"), to
> deal
> + * in the Software without restriction, including without limitation the
> rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "hw/sysbus.h"
> +#include "hw/register.h"
> +#include "qemu/log.h"
> +#include "hw/gpio/xlnx-pmu-iomod-gp.h"
> +
> +#ifndef XLNX_ZYNQMP_IOMOD_GPIO_DEBUG
> +#define XLNX_ZYNQMP_IOMOD_GPIO_DEBUG 0
> +#endif
> +
> +REG32(GPO0, 0x00)
> +
> +static void xlnx_iomod_gpio_gpo0_prew(RegisterInfo *reg, uint64_t value)
> +{
> + XlnxPMUIOGPIO *s = XLNX_ZYNQMP_IOMOD_GPIO(reg->opaque);
> + unsigned int i;
> +
> + for (i = 0; i < s->size; i++) {
> + bool flag = !!(value & (1 << i));
> + qemu_set_irq(s->outputs[i], flag);
I thought this was available: qemu_set_irqs(s->outputs, value, s->size);
Maybe shorter:
qemu_set_irq(s->outputs[i], extract64(flag, i, 1);
> + }
> +}
> +
> +static uint64_t xlnx_iomod_gpio_gpo0_postr(RegisterInfo *reg, uint64_t value)
> +{
> + return 0;
> +}
> +
> +static const RegisterAccessInfo xlnx_iomod_gpio_regs_info[] = {
> + { .name = "GPO0", .addr = A_GPO0,
> + .post_write = xlnx_iomod_gpio_gpo0_prew,
> + .post_read = xlnx_iomod_gpio_gpo0_postr,
> + }
> +};
> +
> +static void xlnx_iomod_gpio_reset(DeviceState *dev)
> +{
> + XlnxPMUIOGPIO *s = XLNX_ZYNQMP_IOMOD_GPIO(dev);
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) {
> + register_reset(&s->regs_info[i]);
> + }
> +
> + xlnx_iomod_gpio_gpo0_prew(&s->regs_info[R_GPO0], s->init);
> +}
> +
> +static const MemoryRegionOps xlnx_iomod_gpio_ops = {
> + .read = register_read_memory,
> + .write = register_write_memory,
> + .endianness = DEVICE_LITTLE_ENDIAN,
> + .valid = {
> + .min_access_size = 4,
> + .max_access_size = 4,
> + },
> +};
> +
> +static void xlnx_iomod_gpio_realize(DeviceState *dev, Error **errp)
> +{
> + XlnxPMUIOGPIO *s = XLNX_ZYNQMP_IOMOD_GPIO(dev);
> +
> + assert(s->size <= 32);
XLNX_(PMU_)IOMOD_GPIO_COUNT?
> + qdev_init_gpio_out(dev, s->outputs, s->size);
> +}
> +
> +static void xlnx_iomod_gpio_init(Object *obj)
> +{
> + XlnxPMUIOGPIO *s = XLNX_ZYNQMP_IOMOD_GPIO(obj);
> + SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
> + RegisterInfoArray *reg_array;
> +
> + memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_IOMOD_GPIO,
> + XLNX_ZYNQMP_IOMOD_GPIO_R_MAX * 4);
> + reg_array =
> + register_init_block32(DEVICE(obj), xlnx_iomod_gpio_regs_info,
> + ARRAY_SIZE(xlnx_iomod_gpio_regs_info),
> + s->regs_info, s->regs,
> + &xlnx_iomod_gpio_ops,
> + XLNX_ZYNQMP_IOMOD_GPIO_DEBUG,
> + XLNX_ZYNQMP_IOMOD_GPIO_R_MAX * 4);
> + memory_region_add_subregion(&s->iomem,
> + 0x0,
> + ®_array->mem);
> + sysbus_init_mmio(sbd, &s->iomem);
> +}
> +
> +static const VMStateDescription vmstate_xlnx_iomod_gpio = {
> + .name = TYPE_XLNX_ZYNQMP_IOMOD_GPIO,
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_END_OF_LIST(),
> + }
> +};
> +
> +static Property xlnx_iomod_gpio_properties[] = {
> + DEFINE_PROP_UINT32("size", XlnxPMUIOGPIO, size, 0),
> + DEFINE_PROP_UINT32("gpo-init", XlnxPMUIOGPIO, init, 0),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void xlnx_iomod_gpio_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> +
> + dc->reset = xlnx_iomod_gpio_reset;
> + dc->realize = xlnx_iomod_gpio_realize;
> + dc->props = xlnx_iomod_gpio_properties;
> + dc->vmsd = &vmstate_xlnx_iomod_gpio;
> +}
> +
> +static const TypeInfo xlnx_iomod_gpio_info = {
> + .name = TYPE_XLNX_ZYNQMP_IOMOD_GPIO,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(XlnxPMUIOGPIO),
> + .class_init = xlnx_iomod_gpio_class_init,
> + .instance_init = xlnx_iomod_gpio_init,
> +};
> +
> +static void xlnx_iomod_gpio_register_types(void)
> +{
> + type_register_static(&xlnx_iomod_gpio_info);
> +}
> +
> +type_init(xlnx_iomod_gpio_register_types)
> diff --git a/hw/gpio/Makefile.objs b/hw/gpio/Makefile.objs
> index fa0a72e6d0..4cefadee85 100644
> --- a/hw/gpio/Makefile.objs
> +++ b/hw/gpio/Makefile.objs
> @@ -8,3 +8,5 @@ common-obj-$(CONFIG_GPIO_KEY) += gpio_key.o
> obj-$(CONFIG_OMAP) += omap_gpio.o
> obj-$(CONFIG_IMX) += imx_gpio.o
> obj-$(CONFIG_RASPI) += bcm2835_gpio.o
> +
> +obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-pmu-iomod-gp.o
>
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [PATCH v2 3/5] hw/gpio: Add the xlnx-pmu-iomod-gpo device,
Philippe Mathieu-Daudé <=