qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v4 3/5] hw/acpi-build: build SRAT memory affinity st


From: Haozhong Zhang
Subject: [Qemu-devel] [PATCH v4 3/5] hw/acpi-build: build SRAT memory affinity structures for DIMM devices
Date: Thu, 8 Mar 2018 10:33:35 +0800

ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity
domain of a NVDIMM SPA range must match with corresponding entry in
SRAT table.

The address ranges of vNVDIMM in QEMU are allocated from the
hot-pluggable address space, which is entirely covered by one SRAT
memory affinity structure. However, users can set the vNVDIMM
proximity domain in NFIT SPA range structure by the 'node' property of
'-device nvdimm' to a value different than the one in the above SRAT
memory affinity structure.

In order to solve such proximity domain mismatch, this patch builds
one SRAT memory affinity structure for each DIMM device present at
boot time, including both PC-DIMM and NVDIMM, with the proximity
domain specified in '-device pc-dimm' or '-device nvdimm'.

The remaining hot-pluggable address space is covered by one or multiple
SRAT memory affinity structures with the proximity domain of the last
node as before.

Signed-off-by: Haozhong Zhang <address@hidden>
---
 hw/i386/acpi-build.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 53 insertions(+), 4 deletions(-)

diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index deb440f286..cb99c63fcf 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -2323,6 +2323,56 @@ build_tpm2(GArray *table_data, BIOSLinker *linker, 
GArray *tcpalog)
 #define HOLE_640K_START  (640 * 1024)
 #define HOLE_640K_END   (1024 * 1024)
 
+static void build_srat_hotpluggable_memory(GArray *table_data, uint64_t base,
+                                           uint64_t len, int default_node)
+{
+    MemoryDeviceInfoList *info_list = qmp_pc_dimm_device_list();
+    MemoryDeviceInfoList *info;
+    MemoryDeviceInfo *mi;
+    PCDIMMDeviceInfo *di;
+    uint64_t end = base + len, cur, size;
+    bool is_nvdimm;
+    AcpiSratMemoryAffinity *numamem;
+    MemoryAffinityFlags flags;
+
+    for (cur = base, info = info_list;
+         cur < end;
+         cur += size, info = info->next) {
+        numamem = acpi_data_push(table_data, sizeof *numamem);
+
+        if (!info) {
+            build_srat_memory(numamem, cur, end - cur, default_node,
+                              MEM_AFFINITY_HOTPLUGGABLE | 
MEM_AFFINITY_ENABLED);
+            break;
+        }
+
+        mi = info->value;
+        is_nvdimm = (mi->type == MEMORY_DEVICE_INFO_KIND_NVDIMM);
+        di = !is_nvdimm ? mi->u.dimm.data :
+                          qapi_NVDIMMDeviceInfo_base(mi->u.nvdimm.data);
+
+        if (cur < di->addr) {
+            build_srat_memory(numamem, cur, di->addr - cur, default_node,
+                              MEM_AFFINITY_HOTPLUGGABLE | 
MEM_AFFINITY_ENABLED);
+            numamem = acpi_data_push(table_data, sizeof *numamem);
+        }
+
+        size = di->size;
+
+        flags = MEM_AFFINITY_ENABLED;
+        if (di->hotpluggable) {
+            flags |= MEM_AFFINITY_HOTPLUGGABLE;
+        }
+        if (is_nvdimm) {
+            flags |= MEM_AFFINITY_NON_VOLATILE;
+        }
+
+        build_srat_memory(numamem, di->addr, size, di->node, flags);
+    }
+
+    qapi_free_MemoryDeviceInfoList(info_list);
+}
+
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
 {
@@ -2434,10 +2484,9 @@ build_srat(GArray *table_data, BIOSLinker *linker, 
MachineState *machine)
      * providing _PXM method if necessary.
      */
     if (hotplugabble_address_space_size) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, pcms->hotplug_memory.base,
-                          hotplugabble_address_space_size, pcms->numa_nodes - 
1,
-                          MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
+        build_srat_hotpluggable_memory(table_data, pcms->hotplug_memory.base,
+                                       hotplugabble_address_space_size,
+                                       pcms->numa_nodes - 1);
     }
 
     build_header(linker, table_data,
-- 
2.14.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]