[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v7 06/23] migration: allow fault thread to pause
From: |
Peter Xu |
Subject: |
[Qemu-devel] [PATCH v7 06/23] migration: allow fault thread to pause |
Date: |
Fri, 9 Mar 2018 17:15:18 +0800 |
Allows the fault thread to stop handling page faults temporarily. When
network failure happened (and if we expect a recovery afterwards), we
should not allow the fault thread to continue sending things to source,
instead, it should halt for a while until the connection is rebuilt.
When the dest main thread noticed the failure, it kicks the fault thread
to switch to pause state.
Reviewed-by: Dr. David Alan Gilbert <address@hidden>
Signed-off-by: Peter Xu <address@hidden>
---
migration/migration.c | 1 +
migration/migration.h | 1 +
migration/postcopy-ram.c | 50 ++++++++++++++++++++++++++++++++++++++++++++----
migration/savevm.c | 3 +++
migration/trace-events | 2 ++
5 files changed, 53 insertions(+), 4 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index b764f3b804..2d97dd742a 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -158,6 +158,7 @@ MigrationIncomingState *migration_incoming_get_current(void)
qemu_mutex_init(&mis_current.rp_mutex);
qemu_event_init(&mis_current.main_thread_load_event, false);
qemu_sem_init(&mis_current.postcopy_pause_sem_dst, 0);
+ qemu_sem_init(&mis_current.postcopy_pause_sem_fault, 0);
once = true;
}
return &mis_current;
diff --git a/migration/migration.h b/migration/migration.h
index 1a18d2e142..92517fd6e3 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -64,6 +64,7 @@ struct MigrationIncomingState {
/* notify PAUSED postcopy incoming migrations to try to continue */
QemuSemaphore postcopy_pause_sem_dst;
+ QemuSemaphore postcopy_pause_sem_fault;
};
MigrationIncomingState *migration_incoming_get_current(void);
diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
index 032abfbf1a..31c290c884 100644
--- a/migration/postcopy-ram.c
+++ b/migration/postcopy-ram.c
@@ -485,6 +485,17 @@ static int ram_block_enable_notify(const char *block_name,
void *host_addr,
return 0;
}
+static bool postcopy_pause_fault_thread(MigrationIncomingState *mis)
+{
+ trace_postcopy_pause_fault_thread();
+
+ qemu_sem_wait(&mis->postcopy_pause_sem_fault);
+
+ trace_postcopy_pause_fault_thread_continued();
+
+ return true;
+}
+
/*
* Handle faults detected by the USERFAULT markings
*/
@@ -535,6 +546,22 @@ static void *postcopy_ram_fault_thread(void *opaque)
}
}
+ if (!mis->to_src_file) {
+ /*
+ * Possibly someone tells us that the return path is
+ * broken already using the event. We should hold until
+ * the channel is rebuilt.
+ */
+ if (postcopy_pause_fault_thread(mis)) {
+ last_rb = NULL;
+ /* Continue to read the userfaultfd */
+ } else {
+ error_report("%s: paused but don't allow to continue",
+ __func__);
+ break;
+ }
+ }
+
ret = read(mis->userfault_fd, &msg, sizeof(msg));
if (ret != sizeof(msg)) {
if (errno == EAGAIN) {
@@ -574,18 +601,33 @@ static void *postcopy_ram_fault_thread(void *opaque)
qemu_ram_get_idstr(rb),
rb_offset);
+retry:
/*
* Send the request to the source - we want to request one
* of our host page sizes (which is >= TPS)
*/
if (rb != last_rb) {
last_rb = rb;
- migrate_send_rp_req_pages(mis, qemu_ram_get_idstr(rb),
- rb_offset, qemu_ram_pagesize(rb));
+ ret = migrate_send_rp_req_pages(mis, qemu_ram_get_idstr(rb),
+ rb_offset, qemu_ram_pagesize(rb));
} else {
/* Save some space */
- migrate_send_rp_req_pages(mis, NULL,
- rb_offset, qemu_ram_pagesize(rb));
+ ret = migrate_send_rp_req_pages(mis, NULL,
+ rb_offset, qemu_ram_pagesize(rb));
+ }
+
+ if (ret) {
+ /* May be network failure, try to wait for recovery */
+ if (ret == -EIO && postcopy_pause_fault_thread(mis)) {
+ /* We got reconnected somehow, try to continue */
+ last_rb = NULL;
+ goto retry;
+ } else {
+ /* This is a unavoidable fault */
+ error_report("%s: migrate_send_rp_req_pages() get %d",
+ __func__, ret);
+ break;
+ }
}
}
trace_postcopy_ram_fault_thread_exit();
diff --git a/migration/savevm.c b/migration/savevm.c
index babcff4844..93e6a13477 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -2059,6 +2059,9 @@ static bool
postcopy_pause_incoming(MigrationIncomingState *mis)
mis->to_src_file = NULL;
qemu_mutex_unlock(&mis->rp_mutex);
+ /* Notify the fault thread for the invalidated file handle */
+ postcopy_fault_thread_notify(mis);
+
error_report("Detected IO failure for postcopy. "
"Migration paused.");
diff --git a/migration/trace-events b/migration/trace-events
index ca17a70222..06a919a6e3 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -101,6 +101,8 @@ open_return_path_on_source_continue(void) ""
postcopy_start(void) ""
postcopy_pause_return_path(void) ""
postcopy_pause_return_path_continued(void) ""
+postcopy_pause_fault_thread(void) ""
+postcopy_pause_fault_thread_continued(void) ""
postcopy_pause_continued(void) ""
postcopy_pause_incoming(void) ""
postcopy_pause_incoming_continued(void) ""
--
2.14.3
- [Qemu-devel] [PATCH v7 00/23] Migration: postcopy failure recovery, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 01/23] migration: let incoming side use thread context, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 03/23] migration: implement "postcopy-pause" src logic, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 04/23] migration: allow dst vm pause on postcopy, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 02/23] migration: new postcopy-pause state, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 05/23] migration: allow src return path to pause, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 06/23] migration: allow fault thread to pause,
Peter Xu <=
- [Qemu-devel] [PATCH v7 07/23] qmp: hmp: add migrate "resume" option, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 08/23] migration: rebuild channel on source, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 10/23] migration: wakeup dst ram-load-thread for recover, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 09/23] migration: new state "postcopy-recover", Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 11/23] migration: new cmd MIG_CMD_RECV_BITMAP, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 14/23] migration: new message MIG_RP_MSG_RESUME_ACK, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 12/23] migration: new message MIG_RP_MSG_RECV_BITMAP, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 13/23] migration: new cmd MIG_CMD_POSTCOPY_RESUME, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 15/23] migration: introduce SaveVMHandlers.resume_prepare, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 16/23] migration: synchronize dirty bitmap for resume, Peter Xu, 2018/03/09