[Qemu-devel] [PULL 11/25] hw/arm: Use more CONFIG switches for the object files

[Peter Maydell]

From: Thomas Huth <address@hidden>

A lot of ARM object files are linked into the executable unconditionally,
even though we have corresponding CONFIG switches like CONFIG_PXA2XX or
CONFIG_OMAP. We should make sure to use these switches in the Makefile so
that the users can disable certain unwanted boards and devices more easily.
While we're at it, also add some new switches for the boards that do not
have a CONFIG option yet.

Signed-off-by: Thomas Huth <address@hidden>
Message-id: address@hidden
Reviewed-by: Peter Maydell <address@hidden>
Reviewed-by: Alex Bennée <address@hidden>
Signed-off-by: Peter Maydell <address@hidden>
---
 hw/arm/Makefile.objs            | 30 +++++++++++++++++++++---------
 default-configs/arm-softmmu.mak |  7 +++++++
 2 files changed, 28 insertions(+), 9 deletions(-)

diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 48474c3394..2885e3e234 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -1,15 +1,27 @@
-obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o
-obj-$(CONFIG_DIGIC) += digic_boards.o
-obj-y += integratorcp.o mainstone.o musicpal.o nseries.o
-obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o
-obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
+obj-y += boot.o virt.o sysbus-fdt.o
 obj-$(CONFIG_ACPI) += virt-acpi-build.o
-obj-y += netduino2.o
-obj-y += sysbus-fdt.o
+obj-$(CONFIG_DIGIC) += digic_boards.o
+obj-$(CONFIG_EXYNOS4) += exynos4_boards.o
+obj-$(CONFIG_HIGHBANK) += highbank.o
+obj-$(CONFIG_INTEGRATOR) += integratorcp.o
+obj-$(CONFIG_MAINSTONE) += mainstone.o
+obj-$(CONFIG_MUSICPAL) += musicpal.o
+obj-$(CONFIG_NETDUINO2) += netduino2.o
+obj-$(CONFIG_NSERIES) += nseries.o
+obj-$(CONFIG_OMAP) += omap_sx1.o palm.o
+obj-$(CONFIG_PXA2XX) += gumstix.o spitz.o tosa.o z2.o
+obj-$(CONFIG_REALVIEW) += realview.o
+obj-$(CONFIG_STELLARIS) += stellaris.o
+obj-$(CONFIG_STRONGARM) += collie.o
+obj-$(CONFIG_VERSATILE) += vexpress.o versatilepb.o
+obj-$(CONFIG_ZYNQ) += xilinx_zynq.o
 
-obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
+obj-$(CONFIG_ARM_V7M) += armv7m.o
+obj-$(CONFIG_EXYNOS4) += exynos4210.o
+obj-$(CONFIG_PXA2XX) += pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
 obj-$(CONFIG_DIGIC) += digic.o
-obj-y += omap1.o omap2.o strongarm.o
+obj-$(CONFIG_OMAP) += omap1.o omap2.o
+obj-$(CONFIG_STRONGARM) += strongarm.o
 obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
 obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o raspi.o
 obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index a5c6b24ae6..dd29e741c2 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -47,6 +47,7 @@ CONFIG_A9MPCORE=y
 CONFIG_A15MPCORE=y
 
 CONFIG_ARM_V7M=y
+CONFIG_NETDUINO2=y
 
 CONFIG_ARM_GIC=y
 CONFIG_ARM_GIC_KVM=$(CONFIG_KVM)
@@ -109,6 +110,7 @@ CONFIG_TZ_PPC=y
 CONFIG_IOTKIT=y
 CONFIG_IOTKIT_SECCTL=y
 
+CONFIG_VERSATILE=y
 CONFIG_VERSATILE_PCI=y
 CONFIG_VERSATILE_I2C=y
 
@@ -117,6 +119,7 @@ CONFIG_VFIO_XGMAC=y
 CONFIG_VFIO_AMD_XGBE=y
 
 CONFIG_SDHCI=y
+CONFIG_INTEGRATOR=y
 CONFIG_INTEGRATOR_DEBUG=y
 
 CONFIG_ALLWINNER_A10_PIT=y
@@ -142,3 +145,7 @@ CONFIG_MSF2=y
 CONFIG_FW_CFG_DMA=y
 CONFIG_XILINX_AXI=y
 CONFIG_PCI_DESIGNWARE=y
+
+CONFIG_STRONGARM=y
+CONFIG_HIGHBANK=y
+CONFIG_MUSICPAL=y
-- 
2.16.2