qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v6 08/26] RISC-V: Make sure rom has space for fdt


From: Michael Clark
Subject: [Qemu-devel] [PATCH v6 08/26] RISC-V: Make sure rom has space for fdt
Date: Sat, 24 Mar 2018 11:13:28 -0700

Remove a potential buffer overflow (not seen in practice).
Perhaps cpu_physical_memory_write already has bound checks.
This change however makes space for the maximum device tree
size and adds an explicit bounds check and error message.
It doesn't trigger, but it may help in the future if the
device-tree size is exceeded. e.g. large bootargs.

Cc: Sagar Karandikar <address@hidden>
Cc: Bastian Koppelmann <address@hidden>
Signed-off-by: Michael Clark <address@hidden>
Signed-off-by: Palmer Dabbelt <address@hidden>
---
 hw/riscv/sifive_u.c | 20 ++++++++++++--------
 hw/riscv/spike.c    | 16 +++++++++++-----
 hw/riscv/virt.c     | 13 +++++++++----
 3 files changed, 32 insertions(+), 17 deletions(-)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 083043a..57b4f4f 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -52,7 +52,7 @@ static const struct MemmapEntry {
     hwaddr size;
 } sifive_u_memmap[] = {
     [SIFIVE_U_DEBUG] =    {        0x0,      0x100 },
-    [SIFIVE_U_MROM] =     {     0x1000,     0x2000 },
+    [SIFIVE_U_MROM] =     {     0x1000,    0x11000 },
     [SIFIVE_U_CLINT] =    {  0x2000000,    0x10000 },
     [SIFIVE_U_PLIC] =     {  0xc000000,  0x4000000 },
     [SIFIVE_U_UART0] =    { 0x10013000,     0x1000 },
@@ -221,7 +221,7 @@ static void riscv_sifive_u_init(MachineState *machine)
     const struct MemmapEntry *memmap = sifive_u_memmap;
 
     SiFiveUState *s = g_new0(SiFiveUState, 1);
-    MemoryRegion *sys_memory = get_system_memory();
+    MemoryRegion *system_memory = get_system_memory();
     MemoryRegion *main_mem = g_new(MemoryRegion, 1);
     MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
 
@@ -239,7 +239,7 @@ static void riscv_sifive_u_init(MachineState *machine)
     /* register RAM */
     memory_region_init_ram(main_mem, NULL, "riscv.sifive.u.ram",
                            machine->ram_size, &error_fatal);
-    memory_region_add_subregion(sys_memory, memmap[SIFIVE_U_DRAM].base,
+    memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DRAM].base,
         main_mem);
 
     /* create device tree */
@@ -247,9 +247,9 @@ static void riscv_sifive_u_init(MachineState *machine)
 
     /* boot rom */
     memory_region_init_ram(mask_rom, NULL, "riscv.sifive.u.mrom",
-                           memmap[SIFIVE_U_MROM].base, &error_fatal);
-    memory_region_set_readonly(mask_rom, true);
-    memory_region_add_subregion(sys_memory, 0x0, mask_rom);
+                           memmap[SIFIVE_U_MROM].size, &error_fatal);
+    memory_region_add_subregion(system_memory, memmap[SIFIVE_U_MROM].base,
+                                mask_rom);
 
     if (machine->kernel_filename) {
         load_kernel(machine->kernel_filename);
@@ -276,6 +276,10 @@ static void riscv_sifive_u_init(MachineState *machine)
     copy_le32_to_phys(memmap[SIFIVE_U_MROM].base, reset_vec, 
sizeof(reset_vec));
 
     /* copy in the device tree */
+    if (s->fdt_size >= memmap[SIFIVE_U_MROM].size - sizeof(reset_vec)) {
+        error_report("qemu: not enough space to store device-tree");
+        exit(1);
+    }
     qemu_fdt_dumpdtb(s->fdt, s->fdt_size);
     cpu_physical_memory_write(memmap[SIFIVE_U_MROM].base +
         sizeof(reset_vec), s->fdt, s->fdt_size);
@@ -293,9 +297,9 @@ static void riscv_sifive_u_init(MachineState *machine)
         SIFIVE_U_PLIC_CONTEXT_BASE,
         SIFIVE_U_PLIC_CONTEXT_STRIDE,
         memmap[SIFIVE_U_PLIC].size);
-    sifive_uart_create(sys_memory, memmap[SIFIVE_U_UART0].base,
+    sifive_uart_create(system_memory, memmap[SIFIVE_U_UART0].base,
         serial_hds[0], SIFIVE_PLIC(s->plic)->irqs[SIFIVE_U_UART0_IRQ]);
-    /* sifive_uart_create(sys_memory, memmap[SIFIVE_U_UART1].base,
+    /* sifive_uart_create(system_memory, memmap[SIFIVE_U_UART1].base,
         serial_hds[1], SIFIVE_PLIC(s->plic)->irqs[SIFIVE_U_UART1_IRQ]); */
     sifive_clint_create(memmap[SIFIVE_U_CLINT].base,
         memmap[SIFIVE_U_CLINT].size, smp_cpus,
diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c
index 64e585e..c7d937b 100644
--- a/hw/riscv/spike.c
+++ b/hw/riscv/spike.c
@@ -46,7 +46,7 @@ static const struct MemmapEntry {
     hwaddr base;
     hwaddr size;
 } spike_memmap[] = {
-    [SPIKE_MROM] =     {     0x1000,     0x2000 },
+    [SPIKE_MROM] =     {     0x1000,    0x11000 },
     [SPIKE_CLINT] =    {  0x2000000,    0x10000 },
     [SPIKE_DRAM] =     { 0x80000000,        0x0 },
 };
@@ -197,8 +197,9 @@ static void spike_v1_10_0_board_init(MachineState *machine)
 
     /* boot rom */
     memory_region_init_ram(mask_rom, NULL, "riscv.spike.mrom",
-                           s->fdt_size + 0x2000, &error_fatal);
-    memory_region_add_subregion(system_memory, 0x0, mask_rom);
+                           memmap[SPIKE_MROM].size, &error_fatal);
+    memory_region_add_subregion(system_memory, memmap[SPIKE_MROM].base,
+                                mask_rom);
 
     if (machine->kernel_filename) {
         load_kernel(machine->kernel_filename);
@@ -225,6 +226,10 @@ static void spike_v1_10_0_board_init(MachineState *machine)
     copy_le32_to_phys(memmap[SPIKE_MROM].base, reset_vec, sizeof(reset_vec));
 
     /* copy in the device tree */
+    if (s->fdt_size >= memmap[SPIKE_MROM].size - sizeof(reset_vec)) {
+        error_report("qemu: not enough space to store device-tree");
+        exit(1);
+    }
     qemu_fdt_dumpdtb(s->fdt, s->fdt_size);
     cpu_physical_memory_write(memmap[SPIKE_MROM].base + sizeof(reset_vec),
         s->fdt, s->fdt_size);
@@ -266,8 +271,9 @@ static void spike_v1_09_1_board_init(MachineState *machine)
 
     /* boot rom */
     memory_region_init_ram(mask_rom, NULL, "riscv.spike.mrom",
-                           0x40000, &error_fatal);
-    memory_region_add_subregion(system_memory, 0x0, mask_rom);
+                           memmap[SPIKE_MROM].size, &error_fatal);
+    memory_region_add_subregion(system_memory, memmap[SPIKE_MROM].base,
+                                mask_rom);
 
     if (machine->kernel_filename) {
         load_kernel(machine->kernel_filename);
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 5913100..d680cbd 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -45,8 +45,8 @@ static const struct MemmapEntry {
     hwaddr size;
 } virt_memmap[] = {
     [VIRT_DEBUG] =    {        0x0,      0x100 },
-    [VIRT_MROM] =     {     0x1000,     0x2000 },
-    [VIRT_TEST] =     {     0x4000,     0x1000 },
+    [VIRT_MROM] =     {     0x1000,    0x11000 },
+    [VIRT_TEST] =     {   0x100000,     0x1000 },
     [VIRT_CLINT] =    {  0x2000000,    0x10000 },
     [VIRT_PLIC] =     {  0xc000000,  0x4000000 },
     [VIRT_UART0] =    { 0x10000000,      0x100 },
@@ -297,8 +297,9 @@ static void riscv_virt_board_init(MachineState *machine)
 
     /* boot rom */
     memory_region_init_ram(mask_rom, NULL, "riscv_virt_board.mrom",
-                           s->fdt_size + 0x2000, &error_fatal);
-    memory_region_add_subregion(system_memory, 0x0, mask_rom);
+                           memmap[VIRT_MROM].size, &error_fatal);
+    memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base,
+                                mask_rom);
 
     if (machine->kernel_filename) {
         uint64_t kernel_entry = load_kernel(machine->kernel_filename);
@@ -336,6 +337,10 @@ static void riscv_virt_board_init(MachineState *machine)
     copy_le32_to_phys(memmap[VIRT_MROM].base, reset_vec, sizeof(reset_vec));
 
     /* copy in the device tree */
+    if (s->fdt_size >= memmap[VIRT_MROM].size - sizeof(reset_vec)) {
+        error_report("qemu: not enough space to store device-tree");
+        exit(1);
+    }
     qemu_fdt_dumpdtb(s->fdt, s->fdt_size);
     cpu_physical_memory_write(memmap[VIRT_MROM].base + sizeof(reset_vec),
         s->fdt, s->fdt_size);
-- 
2.7.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]