qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [Qemu-arm] [PATCH for-2.13 v2 4/5] platform-bus-device:


From: Philippe Mathieu-Daudé
Subject: Re: [Qemu-devel] [Qemu-arm] [PATCH for-2.13 v2 4/5] platform-bus-device: use device plug callback instead of machine_done notifier
Date: Wed, 18 Apr 2018 13:29:31 -0300
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.7.0

On 04/18/2018 11:28 AM, Igor Mammedov wrote:
> platform-bus were using machine_done notifier to get and map
> (assign irq/mmio resources) dynamically added sysbus devices
> after all '-device' options had been processed.
> That however creates non obvious dependencies on ordering of
> machine_done notifiers and requires carefull line juggling
> to keep it working. For example see comment above
> create_platform_bus() and 'straitforward' arm_load_kernel()
> had to converted to machine_done notifier and that lead to
> yet another machine_done notifier to keep it working
> arm_register_platform_bus_fdt_creator().
> 
> Instead of hiding resource assignment in platform-bus-device
> to magically initialize sysbus devices, use device plug
> callback and assign resources explicitly at board level
> at the moment each -device option is being processed.
> 
> That adds a bunch of machine declaration boiler plate to
> e500plat board, similar to ARM/x86 but gets rid of hidden
> machine_done notifier and would allow to remove the dependent
> notifiers in ARM code simplifying it and making code flow
> easier to follow.
> 
> Signed-off-by: Igor Mammedov <address@hidden>
> ---
> CC: address@hidden
> CC: address@hidden
> CC: address@hidden
> 
> v2:
>   - don't save original MachineClass::get_hotplug_handler, just overwrite it.
>     (there isn't any use case for chaining get_hotplug_handler() yet,
>      so keep things simple for now) (David Gibson <address@hidden>)
>   - s/hotpug/hotplug/ (Peter Maydell <address@hidden>)
>   - ppc: rebase on top (ppc: e500: switch E500 based machines to full  
> machine definition)
> ---
>  hw/ppc/e500.h             |  5 +++++
>  include/hw/arm/virt.h     |  1 +
>  include/hw/platform-bus.h |  4 ++--
>  hw/arm/sysbus-fdt.c       |  3 ---
>  hw/arm/virt.c             | 31 +++++++++++++++++++++++++++++++
>  hw/core/platform-bus.c    | 29 +++++------------------------
>  hw/ppc/e500.c             | 38 +++++++++++++++++---------------------
>  hw/ppc/e500plat.c         | 31 +++++++++++++++++++++++++++++++
>  8 files changed, 92 insertions(+), 50 deletions(-)
> 
> diff --git a/hw/ppc/e500.h b/hw/ppc/e500.h
> index 621403b..3fd9f82 100644
> --- a/hw/ppc/e500.h
> +++ b/hw/ppc/e500.h
> @@ -2,11 +2,16 @@
>  #define PPCE500_H
>  
>  #include "hw/boards.h"
> +#include "hw/platform-bus.h"
>  
>  typedef struct PPCE500MachineState {
>      /*< private >*/
>      MachineState parent_obj;
>  
> +    /* points to instance of TYPE_PLATFORM_BUS_DEVICE if
> +     * board supports dynamic sysbus devices
> +     */
> +    PlatformBusDevice *pbus_dev;
>  } PPCE500MachineState;
>  
>  typedef struct PPCE500MachineClass {
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index ba0c1a4..e4e3e46 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -91,6 +91,7 @@ typedef struct {
>  typedef struct {
>      MachineState parent;
>      Notifier machine_done;
> +    DeviceState *platform_bus_dev;
>      FWCfgState *fw_cfg;
>      bool secure;
>      bool highmem;
> diff --git a/include/hw/platform-bus.h b/include/hw/platform-bus.h
> index a00775c..19e20c5 100644
> --- a/include/hw/platform-bus.h
> +++ b/include/hw/platform-bus.h
> @@ -37,8 +37,6 @@ typedef struct PlatformBusDevice PlatformBusDevice;
>  struct PlatformBusDevice {
>      /*< private >*/
>      SysBusDevice parent_obj;
> -    Notifier notifier;
> -    bool done_gathering;
>  
>      /*< public >*/
>      uint32_t mmio_size;
> @@ -54,4 +52,6 @@ int platform_bus_get_irqn(PlatformBusDevice *platform_bus, 
> SysBusDevice *sbdev,
>  hwaddr platform_bus_get_mmio_addr(PlatformBusDevice *pbus, SysBusDevice 
> *sbdev,
>                                    int n);
>  
> +void platform_bus_link_device(PlatformBusDevice *pbus, SysBusDevice *sbdev);
> +
>  #endif /* HW_PLATFORM_BUS_H */
> diff --git a/hw/arm/sysbus-fdt.c b/hw/arm/sysbus-fdt.c
> index d68e3dc..80ff70e 100644
> --- a/hw/arm/sysbus-fdt.c
> +++ b/hw/arm/sysbus-fdt.c
> @@ -506,9 +506,6 @@ static void 
> add_all_platform_bus_fdt_nodes(ARMPlatformBusFDTParams *fdt_params)
>      dev = qdev_find_recursive(sysbus_get_default(), 
> TYPE_PLATFORM_BUS_DEVICE);
>      pbus = PLATFORM_BUS_DEVICE(dev);
>  
> -    /* We can only create dt nodes for dynamic devices when they're ready */
> -    assert(pbus->done_gathering);
> -
>      PlatformBusFDTData data = {
>          .fdt = fdt,
>          .irq_start = irq_start,
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index 94dcb12..112c367 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -1087,6 +1087,7 @@ static void create_platform_bus(VirtMachineState *vms, 
> qemu_irq *pic)
>      qdev_prop_set_uint32(dev, "mmio_size",
>          platform_bus_params.platform_bus_size);
>      qdev_init_nofail(dev);
> +    vms->platform_bus_dev = dev;
>      s = SYS_BUS_DEVICE(dev);
>  
>      for (i = 0; i < platform_bus_params.platform_bus_num_irqs; i++) {
> @@ -1536,9 +1537,33 @@ static const CPUArchIdList 
> *virt_possible_cpu_arch_ids(MachineState *ms)
>      return ms->possible_cpus;
>  }
>  
> +static void virt_machine_device_plug_cb(HotplugHandler *hotplug_dev,
> +                                        DeviceState *dev, Error **errp)
> +{
> +    VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
> +
> +    if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE)) {
> +        if (vms->platform_bus_dev) {

Inverting the if conditions is probably cheaper.

> +            
> platform_bus_link_device(PLATFORM_BUS_DEVICE(vms->platform_bus_dev),
> +                                     SYS_BUS_DEVICE(dev));
> +        }
> +    }
> +}
> +
> +static HotplugHandler *virt_machine_get_hotplug_handler(MachineState 
> *machine,
> +                                                        DeviceState *dev)
> +{
> +    if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE)) {
> +        return HOTPLUG_HANDLER(machine);
> +    }
> +
> +    return NULL;
> +}
> +
>  static void virt_machine_class_init(ObjectClass *oc, void *data)
>  {
>      MachineClass *mc = MACHINE_CLASS(oc);
> +    HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
>  
>      mc->init = machvirt_init;
>      /* Start max_cpus at the maximum QEMU supports. We'll further restrict
> @@ -1557,6 +1582,8 @@ static void virt_machine_class_init(ObjectClass *oc, 
> void *data)
>      mc->cpu_index_to_instance_props = virt_cpu_index_to_props;
>      mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15");
>      mc->get_default_cpu_node_id = virt_get_default_cpu_node_id;
> +    mc->get_hotplug_handler = virt_machine_get_hotplug_handler;
> +    hc->plug = virt_machine_device_plug_cb;
>  }
>  
>  static const TypeInfo virt_machine_info = {
> @@ -1566,6 +1593,10 @@ static const TypeInfo virt_machine_info = {
>      .instance_size = sizeof(VirtMachineState),
>      .class_size    = sizeof(VirtMachineClass),
>      .class_init    = virt_machine_class_init,
> +    .interfaces = (InterfaceInfo[]) {
> +         { TYPE_HOTPLUG_HANDLER },
> +         { }
> +    },
>  };
>  
>  static void machvirt_machine_init(void)
> diff --git a/hw/core/platform-bus.c b/hw/core/platform-bus.c
> index 33d32fb..807cb5c 100644
> --- a/hw/core/platform-bus.c
> +++ b/hw/core/platform-bus.c
> @@ -103,7 +103,6 @@ static void plaform_bus_refresh_irqs(PlatformBusDevice 
> *pbus)
>  {
>      bitmap_zero(pbus->used_irqs, pbus->num_irqs);
>      foreach_dynamic_sysbus_device(platform_bus_count_irqs, pbus);
> -    pbus->done_gathering = true;
>  }
>  
>  static void platform_bus_map_irq(PlatformBusDevice *pbus, SysBusDevice 
> *sbdev,
> @@ -163,12 +162,11 @@ static void platform_bus_map_mmio(PlatformBusDevice 
> *pbus, SysBusDevice *sbdev,
>  }
>  
>  /*
> - * For each sysbus device, look for unassigned IRQ lines as well as
> - * unassociated MMIO regions. Connect them to the platform bus if available.
> + * Look for unassigned IRQ lines as well as unassociated MMIO regions.
> + * Connect them to the platform bus if available.
>   */
> -static void link_sysbus_device(SysBusDevice *sbdev, void *opaque)
> +void platform_bus_link_device(PlatformBusDevice *pbus, SysBusDevice *sbdev)
>  {
> -    PlatformBusDevice *pbus = opaque;
>      int i;
>  
>      for (i = 0; sysbus_has_irq(sbdev, i); i++) {
> @@ -180,19 +178,6 @@ static void link_sysbus_device(SysBusDevice *sbdev, void 
> *opaque)
>      }
>  }
>  
> -static void platform_bus_init_notify(Notifier *notifier, void *data)
> -{
> -    PlatformBusDevice *pb = container_of(notifier, PlatformBusDevice, 
> notifier);
> -
> -    /*
> -     * Generate a bitmap of used IRQ lines, as the user might have specified
> -     * them on the command line.
> -     */
> -    plaform_bus_refresh_irqs(pb);
> -
> -    foreach_dynamic_sysbus_device(link_sysbus_device, pb);
> -}
> -
>  static void platform_bus_realize(DeviceState *dev, Error **errp)
>  {
>      PlatformBusDevice *pbus;
> @@ -211,12 +196,8 @@ static void platform_bus_realize(DeviceState *dev, Error 
> **errp)
>          sysbus_init_irq(d, &pbus->irqs[i]);
>      }
>  
> -    /*
> -     * Register notifier that allows us to gather dangling devices once the
> -     * machine is completely assembled
> -     */
> -    pbus->notifier.notify = platform_bus_init_notify;
> -    qemu_add_machine_init_done_notifier(&pbus->notifier);
> +    /* some devices might be initialized before so update used IRQs map */
> +    plaform_bus_refresh_irqs(pbus);
>  }
>  
>  static Property platform_bus_properties[] = {
> diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
> index 30b42a8..e91a5f6 100644
> --- a/hw/ppc/e500.c
> +++ b/hw/ppc/e500.c
> @@ -221,16 +221,15 @@ static void sysbus_device_create_devtree(SysBusDevice 
> *sbdev, void *opaque)
>      }
>  }
>  
> -static void platform_bus_create_devtree(const PPCE500MachineClass *pmc,
> +static void platform_bus_create_devtree(PPCE500MachineState *pms,
>                                          void *fdt, const char *mpic)
>  {
> +    const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms);
>      gchar *node = g_strdup_printf("/address@hidden"PRIx64, 
> pmc->platform_bus_base);
>      const char platcomp[] = "qemu,platform\0simple-bus";
>      uint64_t addr = pmc->platform_bus_base;
>      uint64_t size = pmc->platform_bus_size;
>      int irq_start = pmc->platform_bus_first_irq;
> -    PlatformBusDevice *pbus;
> -    DeviceState *dev;
>  
>      /* Create a /platform node that we can put all devices into */
>  
> @@ -245,22 +244,17 @@ static void platform_bus_create_devtree(const 
> PPCE500MachineClass *pmc,
>  
>      qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic);
>  
> -    dev = qdev_find_recursive(sysbus_get_default(), 
> TYPE_PLATFORM_BUS_DEVICE);
> -    pbus = PLATFORM_BUS_DEVICE(dev);
> -
> -    /* We can only create dt nodes for dynamic devices when they're ready */
> -    if (pbus->done_gathering) {
> -        PlatformDevtreeData data = {
> -            .fdt = fdt,
> -            .mpic = mpic,
> -            .irq_start = irq_start,
> -            .node = node,
> -            .pbus = pbus,
> -        };
> +    /* Create dt nodes for dynamic devices */
> +    PlatformDevtreeData data = {
> +        .fdt = fdt,
> +        .mpic = mpic,
> +        .irq_start = irq_start,
> +        .node = node,
> +        .pbus = pms->pbus_dev,
> +    };
>  
> -        /* Loop through all dynamic sysbus devices and create nodes for them 
> */
> -        foreach_dynamic_sysbus_device(sysbus_device_create_devtree, &data);
> -    }
> +    /* Loop through all dynamic sysbus devices and create nodes for them */
> +    foreach_dynamic_sysbus_device(sysbus_device_create_devtree, &data);
>  
>      g_free(node);
>  }
> @@ -527,8 +521,8 @@ static int ppce500_load_device_tree(PPCE500MachineState 
> *pms,
>          create_dt_mpc8xxx_gpio(fdt, soc, mpic);
>      }
>  
> -    if (pmc->has_platform_bus) {
> -        platform_bus_create_devtree(pmc, fdt, mpic);
> +    if (pms->pbus_dev) {
> +        platform_bus_create_devtree(pms, fdt, mpic);
>      }
>  
>      pmc->fixup_devtree(fdt);
> @@ -946,8 +940,9 @@ void ppce500_init(MachineState *machine)
>          qdev_prop_set_uint32(dev, "num_irqs", pmc->platform_bus_num_irqs);
>          qdev_prop_set_uint32(dev, "mmio_size", pmc->platform_bus_size);
>          qdev_init_nofail(dev);
> -        s = SYS_BUS_DEVICE(dev);
> +        pms->pbus_dev = PLATFORM_BUS_DEVICE(dev);
>  
> +        s = SYS_BUS_DEVICE(pms->pbus_dev);
>          for (i = 0; i < pmc->platform_bus_num_irqs; i++) {
>              int irqn = pmc->platform_bus_first_irq + i;
>              sysbus_connect_irq(s, i, qdev_get_gpio_in(mpicdev, irqn));
> @@ -1090,6 +1085,7 @@ static const TypeInfo ppce500_info = {
>      .name          = TYPE_PPCE500_MACHINE,
>      .parent        = TYPE_MACHINE,
>      .abstract      = true,
> +    .instance_size = sizeof(PPCE500MachineState),
>      .class_size    = sizeof(PPCE500MachineClass),
>  };
>  
> diff --git a/hw/ppc/e500plat.c b/hw/ppc/e500plat.c
> index f69aadb..1a469ba 100644
> --- a/hw/ppc/e500plat.c
> +++ b/hw/ppc/e500plat.c
> @@ -43,13 +43,40 @@ static void e500plat_init(MachineState *machine)
>      ppce500_init(machine);
>  }
>  
> +static void e500plat_machine_device_plug_cb(HotplugHandler *hotplug_dev,
> +                                            DeviceState *dev, Error **errp)
> +{
> +    PPCE500MachineState *pms = PPCE500_MACHINE(hotplug_dev);
> +
> +    if (pms->pbus_dev) {
> +        if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE)) {

Here you do it!

> +            platform_bus_link_device(pms->pbus_dev, SYS_BUS_DEVICE(dev));
> +        }
> +    }
> +}
> +
> +static
> +HotplugHandler *e500plat_machine_get_hotpug_handler(MachineState *machine,
> +                                                    DeviceState *dev)
> +{
> +    if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE)) {
> +        return HOTPLUG_HANDLER(machine);
> +    }
> +
> +    return NULL;
> +}
> +
>  #define TYPE_E500PLAT_MACHINE  MACHINE_TYPE_NAME("ppce500")
>  
>  static void e500plat_machine_class_init(ObjectClass *oc, void *data)
>  {
>      PPCE500MachineClass *pmc = PPCE500_MACHINE_CLASS(oc);
> +    HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
>      MachineClass *mc = MACHINE_CLASS(oc);
>  
> +    mc->get_hotplug_handler = e500plat_machine_get_hotpug_handler;
> +    hc->plug = e500plat_machine_device_plug_cb;
> +
>      pmc->pci_first_slot = 0x1;
>      pmc->pci_nr_slots = PCI_SLOT_MAX - 1;
>      pmc->fixup_devtree = e500plat_fixup_devtree;
> @@ -77,6 +104,10 @@ static const TypeInfo e500plat_info = {
>      .name          = TYPE_E500PLAT_MACHINE,
>      .parent        = TYPE_PPCE500_MACHINE,
>      .class_init    = e500plat_machine_class_init,
> +    .interfaces    = (InterfaceInfo[]) {
> +         { TYPE_HOTPLUG_HANDLER },
> +         { }
> +    }
>  };
>  
>  static void e500plat_register_types(void)
> 

Reviewed-by: Philippe Mathieu-Daudé <address@hidden>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]