qemu-devel
[Top][All Lists]
Advanced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PULL 56/56] hw: make virtio devices configurable via d

From: Philippe Mathieu-Daudé
Subject: Re: [Qemu-devel] [PULL 56/56] hw: make virtio devices configurable via default-configs/
Date: Fri, 1 Jun 2018 14:26:21 -0300
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.8.0 
On 06/01/2018 02:15 PM, Paolo Bonzini wrote:
> This is only half of the work, because the proxy devices (virtio-*-pci,
> virtio-*-ccw, etc.) are still included unconditionally.  It is still a
> move in the right direction.
> 
> Based-on: <address@hidden>

Is this tag useful?

> Signed-off-by: Paolo Bonzini <address@hidden>
> ---
>  default-configs/arm-softmmu.mak     |  1 +
>  default-configs/hppa-softmmu.mak    |  2 --
>  default-configs/pci.mak             |  4 +---
>  default-configs/riscv32-softmmu.mak |  4 ++--
>  default-configs/riscv64-softmmu.mak |  4 ++--
>  default-configs/s390x-softmmu.mak   |  5 +----
>  default-configs/virtio.mak          | 14 ++++++++++++++
>  hw/9pfs/Makefile.objs               |  6 ++++--
>  hw/block/Makefile.objs              |  6 ++----
>  hw/char/Makefile.objs               |  2 +-
>  hw/display/Makefile.objs            |  4 ++--
>  hw/input/Makefile.objs              |  6 +++---
>  hw/net/Makefile.objs                |  2 +-
>  hw/scsi/Makefile.objs               |  2 +-
>  hw/virtio/Makefile.objs             | 16 +++++++++-------
>  15 files changed, 44 insertions(+), 34 deletions(-)
>  create mode 100644 default-configs/virtio.mak
> 
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index dd29e741c2..8ba2558b36 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -41,6 +41,7 @@ CONFIG_USB=y
>  CONFIG_USB_MUSB=y
>  CONFIG_USB_EHCI_SYSBUS=y
>  CONFIG_PLATFORM_BUS=y
> +CONFIG_VIRTIO_MMIO=y
>  
>  CONFIG_ARM11MPCORE=y
>  CONFIG_A9MPCORE=y
> diff --git a/default-configs/hppa-softmmu.mak 
> b/default-configs/hppa-softmmu.mak
> index 013e5f046f..4badc0521e 100644
> --- a/default-configs/hppa-softmmu.mak
> +++ b/default-configs/hppa-softmmu.mak
> @@ -4,8 +4,6 @@ CONFIG_SERIAL=y
>  CONFIG_SERIAL_ISA=y
>  CONFIG_ISA_BUS=y
>  CONFIG_I8259=y
> -CONFIG_VIRTIO_PCI=$(CONFIG_PCI)
> -CONFIG_VIRTIO=y
>  CONFIG_E1000_PCI=y
>  CONFIG_IDE_ISA=y
>  CONFIG_IDE_CMD646=y
> diff --git a/default-configs/pci.mak b/default-configs/pci.mak
> index 163dd814c7..de53d20ac6 100644
> --- a/default-configs/pci.mak
> +++ b/default-configs/pci.mak
> @@ -2,7 +2,7 @@ CONFIG_PCI=y
>  # For now, CONFIG_IDE_CORE requires ISA, so we enable it here
>  CONFIG_ISA_BUS=y
>  CONFIG_VIRTIO_PCI=y
> -CONFIG_VIRTIO=y
> +include virtio.mak
>  CONFIG_USB_UHCI=y
>  CONFIG_USB_OHCI=y
>  CONFIG_USB_EHCI=y
> @@ -46,5 +46,3 @@ CONFIG_VGA=y
>  CONFIG_VGA_PCI=y
>  CONFIG_IVSHMEM_DEVICE=$(CONFIG_IVSHMEM)
>  CONFIG_ROCKER=y
> -CONFIG_VHOST_USER_SCSI=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
> -CONFIG_VHOST_USER_BLK=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
> diff --git a/default-configs/riscv32-softmmu.mak 
> b/default-configs/riscv32-softmmu.mak
> index 9159a4a8af..20e670d99c 100644
> --- a/default-configs/riscv32-softmmu.mak
> +++ b/default-configs/riscv32-softmmu.mak
> @@ -1,5 +1,5 @@
>  # Default configuration for riscv-softmmu
>  
>  CONFIG_SERIAL=y
> -CONFIG_VIRTIO=y
> -CONFIG_SCSI=y
> +CONFIG_VIRTIO_MMIO=y
> +include virtio.mak
> diff --git a/default-configs/riscv64-softmmu.mak 
> b/default-configs/riscv64-softmmu.mak
> index 9159a4a8af..20e670d99c 100644
> --- a/default-configs/riscv64-softmmu.mak
> +++ b/default-configs/riscv64-softmmu.mak
> @@ -1,5 +1,5 @@
>  # Default configuration for riscv-softmmu
>  
>  CONFIG_SERIAL=y
> -CONFIG_VIRTIO=y
> -CONFIG_SCSI=y
> +CONFIG_VIRTIO_MMIO=y
> +include virtio.mak
> diff --git a/default-configs/s390x-softmmu.mak 
> b/default-configs/s390x-softmmu.mak
> index 729033b25a..d6b67d50f0 100644
> --- a/default-configs/s390x-softmmu.mak
> +++ b/default-configs/s390x-softmmu.mak
> @@ -1,9 +1,6 @@
>  CONFIG_PCI=y
>  CONFIG_VIRTIO_PCI=$(CONFIG_PCI)
> -CONFIG_VHOST_USER_SCSI=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
> -CONFIG_VHOST_USER_BLK=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
> -CONFIG_SCSI=y
> -CONFIG_VIRTIO=y
> +include virtio.mak
>  CONFIG_SCLPCONSOLE=y
>  CONFIG_TERMINAL3270=y
>  CONFIG_S390_FLIC=y
> diff --git a/default-configs/virtio.mak b/default-configs/virtio.mak
> new file mode 100644
> index 0000000000..1304849018
> --- /dev/null
> +++ b/default-configs/virtio.mak
> @@ -0,0 +1,14 @@
> +CONFIG_VHOST_USER_SCSI=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
> +CONFIG_VHOST_USER_BLK=$(call land,$(CONFIG_VHOST_USER),$(CONFIG_LINUX))
> +CONFIG_VIRTIO=y
> +CONFIG_VIRTIO_9P=y
> +CONFIG_VIRTIO_BALLOON=y
> +CONFIG_VIRTIO_BLK=y
> +CONFIG_VIRTIO_CRYPTO=y
> +CONFIG_VIRTIO_GPU=y
> +CONFIG_VIRTIO_INPUT=y
> +CONFIG_VIRTIO_NET=y
> +CONFIG_VIRTIO_RNG=y
> +CONFIG_SCSI=y
> +CONFIG_VIRTIO_SCSI=y
> +CONFIG_VIRTIO_SERIAL=y
> diff --git a/hw/9pfs/Makefile.objs b/hw/9pfs/Makefile.objs
> index fd90b62900..e3fa673665 100644
> --- a/hw/9pfs/Makefile.objs
> +++ b/hw/9pfs/Makefile.objs
> @@ -1,3 +1,4 @@
> +ifeq ($(call lor,$(CONFIG_VIRTIO_9P),$(CONFIG_XEN)),y)
>  common-obj-y  = 9p.o 9p-util.o
>  common-obj-y += 9p-local.o 9p-xattr.o
>  common-obj-y += 9p-xattr-user.o 9p-posix-acl.o
> @@ -5,6 +6,7 @@ common-obj-y += coth.o cofs.o codir.o cofile.o
>  common-obj-y += coxattr.o 9p-synth.o
>  common-obj-$(CONFIG_OPEN_BY_HANDLE) +=  9p-handle.o
>  common-obj-y += 9p-proxy.o
> -common-obj-$(CONFIG_XEN) += xen-9p-backend.o
> +endif
>  
> -obj-$(CONFIG_VIRTIO) += virtio-9p-device.o
> +common-obj-$(CONFIG_XEN) += xen-9p-backend.o
> +obj-$(CONFIG_VIRTIO_9P) += virtio-9p-device.o
> diff --git a/hw/block/Makefile.objs b/hw/block/Makefile.objs
> index 4c19a583c8..53ce5751ae 100644
> --- a/hw/block/Makefile.objs
> +++ b/hw/block/Makefile.objs
> @@ -11,8 +11,6 @@ common-obj-$(CONFIG_NVME_PCI) += nvme.o
>  
>  obj-$(CONFIG_SH4) += tc58128.o
>  
> -obj-$(CONFIG_VIRTIO) += virtio-blk.o
> -obj-$(CONFIG_VIRTIO) += dataplane/
> -ifeq ($(CONFIG_VIRTIO),y)
> +obj-$(CONFIG_VIRTIO_BLK) += virtio-blk.o
> +obj-$(CONFIG_VIRTIO_BLK) += dataplane/
>  obj-$(CONFIG_VHOST_USER_BLK) += vhost-user-blk.o
> -endif
> diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
> index 1b979100b7..b570531291 100644
> --- a/hw/char/Makefile.objs
> +++ b/hw/char/Makefile.objs
> @@ -6,7 +6,7 @@ common-obj-$(CONFIG_PL011) += pl011.o
>  common-obj-$(CONFIG_SERIAL) += serial.o
>  common-obj-$(CONFIG_SERIAL_ISA) += serial-isa.o
>  common-obj-$(CONFIG_SERIAL_PCI) += serial-pci.o
> -common-obj-$(CONFIG_VIRTIO) += virtio-console.o
> +common-obj-$(CONFIG_VIRTIO_SERIAL) += virtio-console.o
>  common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
>  common-obj-$(CONFIG_XEN) += xen_console.o
>  common-obj-$(CONFIG_CADENCE) += cadence_uart.o
> diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs
> index d907b381ae..b5d97ab26d 100644
> --- a/hw/display/Makefile.objs
> +++ b/hw/display/Makefile.objs
> @@ -36,8 +36,8 @@ obj-$(CONFIG_VGA) += vga.o
>  
>  common-obj-$(CONFIG_QXL) += qxl.o qxl-logger.o qxl-render.o
>  
> -obj-$(CONFIG_VIRTIO) += virtio-gpu.o virtio-gpu-3d.o
> -obj-$(CONFIG_VIRTIO_PCI) += virtio-gpu-pci.o
> +obj-$(CONFIG_VIRTIO_GPU) += virtio-gpu.o virtio-gpu-3d.o
> +obj-$(call land,$(CONFIG_VIRTIO_GPU),$(CONFIG_VIRTIO_PCI)) += 
> virtio-gpu-pci.o
>  obj-$(CONFIG_VIRTIO_VGA) += virtio-vga.o
>  virtio-gpu.o-cflags := $(VIRGL_CFLAGS)
>  virtio-gpu.o-libs += $(VIRGL_LIBS)
> diff --git a/hw/input/Makefile.objs b/hw/input/Makefile.objs
> index 77e53e6883..c8b00f71ec 100644
> --- a/hw/input/Makefile.objs
> +++ b/hw/input/Makefile.objs
> @@ -7,10 +7,10 @@ common-obj-y += ps2.o
>  common-obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
>  common-obj-$(CONFIG_TSC2005) += tsc2005.o
>  
> -common-obj-$(CONFIG_VIRTIO) += virtio-input.o
> -common-obj-$(CONFIG_VIRTIO) += virtio-input-hid.o
> +common-obj-$(CONFIG_VIRTIO_INPUT) += virtio-input.o
> +common-obj-$(CONFIG_VIRTIO_INPUT) += virtio-input-hid.o
>  ifeq ($(CONFIG_LINUX),y)
> -common-obj-$(CONFIG_VIRTIO) += virtio-input-host.o
> +common-obj-$(CONFIG_VIRTIO_INPUT) += virtio-input-host.o
>  endif
>  
>  obj-$(CONFIG_MILKYMIST) += milkymist-softusb.o
> diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs
> index ab22968641..fa461d4463 100644
> --- a/hw/net/Makefile.objs
> +++ b/hw/net/Makefile.objs
> @@ -36,7 +36,7 @@ obj-$(CONFIG_MILKYMIST) += milkymist-minimac2.o
>  obj-$(CONFIG_PSERIES) += spapr_llan.o
>  obj-$(CONFIG_XILINX_ETHLITE) += xilinx_ethlite.o
>  
> -obj-$(CONFIG_VIRTIO) += virtio-net.o
> +obj-$(CONFIG_VIRTIO_NET) += virtio-net.o
>  obj-y += vhost_net.o
>  
>  obj-$(CONFIG_ETSEC) += fsl_etsec/etsec.o fsl_etsec/registers.o \
> diff --git a/hw/scsi/Makefile.objs b/hw/scsi/Makefile.objs
> index b188f7242b..718b4c2a68 100644
> --- a/hw/scsi/Makefile.objs
> +++ b/hw/scsi/Makefile.objs
> @@ -8,7 +8,7 @@ common-obj-$(CONFIG_ESP) += esp.o
>  common-obj-$(CONFIG_ESP_PCI) += esp-pci.o
>  obj-$(CONFIG_PSERIES) += spapr_vscsi.o
>  
> -ifeq ($(CONFIG_VIRTIO),y)
> +ifeq ($(CONFIG_VIRTIO_SCSI),y)
>  obj-y += virtio-scsi.o virtio-scsi-dataplane.o
>  obj-$(CONFIG_VHOST_SCSI) += vhost-scsi-common.o vhost-scsi.o
>  obj-$(CONFIG_VHOST_USER_SCSI) += vhost-scsi-common.o vhost-user-scsi.o
> diff --git a/hw/virtio/Makefile.objs b/hw/virtio/Makefile.objs
> index 765d363c1f..1b2799cfd8 100644
> --- a/hw/virtio/Makefile.objs
> +++ b/hw/virtio/Makefile.objs
> @@ -1,15 +1,17 @@
>  ifeq ($(CONFIG_VIRTIO),y)
> -common-obj-y += virtio-rng.o
> -common-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
>  common-obj-y += virtio-bus.o
> -common-obj-y += virtio-mmio.o
> +obj-y += virtio.o
> +
> +common-obj-$(CONFIG_VIRTIO_RNG) += virtio-rng.o
> +common-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
> +common-obj-$(CONFIG_VIRTIO_MMIO) += virtio-mmio.o
> +obj-$(CONFIG_VIRTIO_BALLOON) += virtio-balloon.o
> +obj-$(CONFIG_VIRTIO_CRYPTO) += virtio-crypto.o
> +obj-$(call land,$(CONFIG_VIRTIO_CRYPTO),$(CONFIG_VIRTIO_PCI)) += 
> virtio-crypto-pci.o
>  
> -obj-y += virtio.o virtio-balloon.o 
>  obj-$(CONFIG_LINUX) += vhost.o vhost-backend.o vhost-user.o
>  obj-$(CONFIG_VHOST_VSOCK) += vhost-vsock.o
> -obj-y += virtio-crypto.o
> -obj-$(CONFIG_VIRTIO_PCI) += virtio-crypto-pci.o
>  endif
>  
> -common-obj-$(call lnot,$(CONFIG_LINUX)) += vhost-stub.o
> +common-obj-$(call lnot,$(call land,$(CONFIG_VIRTIO),$(CONFIG_LINUX))) += 
> vhost-stub.o
>  common-obj-$(CONFIG_ALL) += vhost-stub.o
>
reply via email to
[Prev in Thread] Current Thread [Next in Thread]