[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-block] [PATCH v2 5/8] qcow: Switch to a byte-base
From: |
Jeff Cody |
Subject: |
Re: [Qemu-devel] [Qemu-block] [PATCH v2 5/8] qcow: Switch to a byte-based driver |
Date: |
Mon, 4 Jun 2018 17:33:27 -0400 |
User-agent: |
Mutt/1.5.24 (2015-08-30) |
On Thu, May 31, 2018 at 03:50:43PM -0500, Eric Blake wrote:
> We are gradually moving away from sector-based interfaces, towards
> byte-based. The qcow driver is now ready to fully utilize the
> byte-based callback interface, as long as we override the default
> alignment to still be 512 (needed at least for asserts present
> because of encryption, but easier to do everywhere than to audit
> which sub-sector requests are handled correctly, especially since
> we no longer recommend qcow for new disk images).
>
> Signed-off-by: Eric Blake <address@hidden>
>
> ---
> v2: minor rebase to changes earlier in series
> ---
> block/qcow.c | 35 ++++++++++++++++++++---------------
> 1 file changed, 20 insertions(+), 15 deletions(-)
>
> diff --git a/block/qcow.c b/block/qcow.c
> index 44adeba276c..55720b006ef 100644
> --- a/block/qcow.c
> +++ b/block/qcow.c
> @@ -69,7 +69,6 @@ typedef struct QCowHeader {
> typedef struct BDRVQcowState {
> int cluster_bits;
> int cluster_size;
> - int cluster_sectors;
> int l2_bits;
> int l2_size;
> unsigned int l1_size;
> @@ -235,7 +234,6 @@ static int qcow_open(BlockDriverState *bs, QDict
> *options, int flags,
> }
> s->cluster_bits = header.cluster_bits;
> s->cluster_size = 1 << s->cluster_bits;
> - s->cluster_sectors = 1 << (s->cluster_bits - 9);
> s->l2_bits = header.l2_bits;
> s->l2_size = 1 << s->l2_bits;
> bs->total_sectors = header.size / 512;
> @@ -613,8 +611,18 @@ static int decompress_cluster(BlockDriverState *bs,
> uint64_t cluster_offset)
> return 0;
> }
>
> -static coroutine_fn int qcow_co_readv(BlockDriverState *bs, int64_t
> sector_num,
> - int nb_sectors, QEMUIOVector *qiov)
> +static void qcow_refresh_limits(BlockDriverState *bs, Error **errp)
> +{
> + /* At least encrypted images require 512-byte alignment. Apply the
> + * limit universally, rather than just on encrypted images, as
> + * it's easier to let the block layer handle rounding than to
> + * audit this code further. */
> + bs->bl.request_alignment = BDRV_SECTOR_SIZE;
> +}
> +
> +static coroutine_fn int qcow_co_preadv(BlockDriverState *bs, uint64_t offset,
> + uint64_t bytes, QEMUIOVector *qiov,
> + int flags)
> {
> BDRVQcowState *s = bs->opaque;
> int offset_in_cluster;
> @@ -624,9 +632,8 @@ static coroutine_fn int qcow_co_readv(BlockDriverState
> *bs, int64_t sector_num,
> QEMUIOVector hd_qiov;
> uint8_t *buf;
> void *orig_buf;
> - int64_t offset = sector_num * BDRV_SECTOR_SIZE;
> - int64_t bytes = nb_sectors * BDRV_SECTOR_SIZE;
>
> + assert(!flags);
Why this assert here and in the _pwritev()?
> if (qiov->niov > 1) {
> buf = orig_buf = qemu_try_blockalign(bs, qiov->size);
> if (buf == NULL) {
> @@ -718,9 +725,9 @@ static coroutine_fn int qcow_co_readv(BlockDriverState
> *bs, int64_t sector_num,
> return ret;
> }
>
> -static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t
> sector_num,
> - int nb_sectors, QEMUIOVector *qiov,
> - int flags)
> +static coroutine_fn int qcow_co_pwritev(BlockDriverState *bs, uint64_t
> offset,
> + uint64_t bytes, QEMUIOVector *qiov,
> + int flags)
> {
> BDRVQcowState *s = bs->opaque;
> int offset_in_cluster;
> @@ -730,8 +737,6 @@ static coroutine_fn int qcow_co_writev(BlockDriverState
> *bs, int64_t sector_num,
> QEMUIOVector hd_qiov;
> uint8_t *buf;
> void *orig_buf;
> - int64_t offset = sector_num * BDRV_SECTOR_SIZE;
> - int64_t bytes = nb_sectors * BDRV_SECTOR_SIZE;
>
> assert(!flags);
> s->cluster_cache_offset = -1; /* disable compressed cache */
> @@ -1108,8 +1113,7 @@ qcow_co_pwritev_compressed(BlockDriverState *bs,
> uint64_t offset,
>
> if (ret != Z_STREAM_END || out_len >= s->cluster_size) {
> /* could not compress: write normal cluster */
> - ret = qcow_co_writev(bs, offset >> BDRV_SECTOR_BITS,
> - bytes >> BDRV_SECTOR_BITS, qiov, 0);
> + ret = qcow_co_pwritev(bs, offset, bytes, qiov, 0);
> if (ret < 0) {
> goto fail;
> }
> @@ -1194,9 +1198,10 @@ static BlockDriver bdrv_qcow = {
> .bdrv_co_create_opts = qcow_co_create_opts,
> .bdrv_has_zero_init = bdrv_has_zero_init_1,
> .supports_backing = true,
> + .bdrv_refresh_limits = qcow_refresh_limits,
>
> - .bdrv_co_readv = qcow_co_readv,
> - .bdrv_co_writev = qcow_co_writev,
> + .bdrv_co_preadv = qcow_co_preadv,
> + .bdrv_co_pwritev = qcow_co_pwritev,
> .bdrv_co_block_status = qcow_co_block_status,
>
> .bdrv_make_empty = qcow_make_empty,
> --
> 2.14.3
>
>
- Re: [Qemu-devel] [Qemu-block] [PATCH v2 5/8] qcow: Switch to a byte-based driver,
Jeff Cody <=