[Qemu-devel] [PATCH 0/1] target/m68k: correctly disassemble move16

[Laurent Vivier]

"move16 address@hidden,%a1@" and "fmovel (cpid=3) address@hidden,%fpcr" share 
the same opcode...
but QEMU executes move16 (and M68040 too).

You can try:

--------------8<--------------------------------------- move16.S
        .data

src:
        .long 0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f00
dst:
        .long 0, 0, 0, 0

        .text
        .globl _start
_start:
        lea src,%a0
        lea dst,%a1

        .fopt id=3
        fmovel -(%a0),%fpcr
        move16 (%a0)+, (%a1)+

        move.l #0,%d1
        move.l #1, %d0
        trap #0
--------------8<--------------------------------------- move16.S

m68k-linux-gnu-gcc -g -m68040 -nostartfiles  -nodefaultlibs \
                   -nostdlib -o move16 move16.S

m68k-linux-gnu-objdump -d move16

move16:     file format elf32-m68k

Disassembly of section .text:

800000b8 <_start>:
800000b8:       41f9 8000 20d4  lea 800020d4 <src>,%a0
800000be:       43f9 8000 20e4  lea 800020e4 <dst>,%a1
800000c4:       f620 9000       move16 address@hidden,address@hidden
800000c8:       f620 9000       move16 address@hidden,address@hidden
800000cc:       7200            moveq #0,%d1
800000ce:       7001            moveq #1,%d0
800000d0:       4e40            trap #0

qemu-m68k -d in_asm ./move16

----------------
IN:
0x800000b8:  lea 0x800020d4,%a0
0x800000be:  lea 0x800020e4,%a1
0x800000c4:  fmovel (cpid=3) address@hidden,%fpcr
0x800000c8:  fmovel (cpid=3) address@hidden,%fpcr
0x800000cc:  moveq #0,%d1
0x800000ce:  moveq #1,%d0
0x800000d0:  trap #0

This patch backports the fix from binutils to only match FPU instructions
with coprocessor ID 1.

Laurent Vivier (1):
  target/m68k: correctly disassemble move16

 disas/m68k.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

-- 
2.14.4