[ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 4.14.6-v7 (address@hidden) (gcc version 6.4.0 (Buildroot 2018.02-git-g9ea3da0)) #2 SMP Sun Dec 17 01:20:30 AEDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x3b800000 [ 0.000000] On node 0 totalpages: 245760 [ 0.000000] free_area_init_node: node 0, pgdat 819812c0, node_mem_map baf86000 [ 0.000000] Normal zone: 2160 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 245760 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:157 arm_dt_init_cpu_maps+0x1b8/0x270 [ 0.000000] DT /cpu 5 nodes greater than max cores 4, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.6-v7 #2 [ 0.000000] Hardware name: BCM2835 [ 0.000000] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 0.000000] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 0.000000] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 0.000000] [<8011d5e0>] (__warn) from [<8011d640>] (warn_slowpath_fmt+0x48/0x50) [ 0.000000] [<8011d640>] (warn_slowpath_fmt) from [<80b05474>] (arm_dt_init_cpu_maps+0x1b8/0x270) [ 0.000000] [<80b05474>] (arm_dt_init_cpu_maps) from [<80b04a58>] (setup_arch+0x870/0xa40) [ 0.000000] [<80b04a58>] (setup_arch) from [<80b00ab8>] (start_kernel+0x64/0x3e0) [ 0.000000] [<80b00ab8>] (start_kernel) from [<0000807c>] (0x807c) [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x50/0x58 with crng_init=0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @baf63000 s38604 r8192 d22836 u69632 [ 0.000000] pcpu-alloc: s38604 r8192 d22836 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 243600 [ 0.000000] Kernel command line: rw earlyprintk loglevel=8 console=ttyAMA0,115200 dwc_otg.lpm_enable=0 root=ram0 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 939288K/983040K available (7168K kernel code, 559K rwdata, 2052K rodata, 14336K init, 705K bss, 35560K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xbc800000 - 0xff800000 (1072 MB) [ 0.000000] lowmem : 0x80000000 - 0xbc000000 ( 960 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x80800000 (8160 kB) [ 0.000000] .init : 0x80b00000 - 0x81900000 (14336 kB) [ 0.000000] .data : 0x81900000 - 0x8198bf3c ( 560 kB) [ 0.000000] .bss : 0x81993114 - 0x81a438b4 ( 706 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 24974 entries in 74 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000127] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns [ 0.000261] Switching to timer-based delay loop, resolution 16ns [ 0.004113] Console: colour dummy device 80x30 [ 0.004624] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.004767] pid_max: default: 32768 minimum: 301 [ 0.007629] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.007681] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.044149] Disabling memory control group subsystem [ 0.047387] CPU: Testing write buffer coherency: ok [ 0.072172] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.077226] Setting up static identity map for 0x100000 - 0x10003c [ 0.078953] Hierarchical SRCU implementation. [ 0.083886] smp: Bringing up secondary CPUs ... [ 0.083988] smp: Brought up 1 node, 1 CPU [ 0.084065] SMP: Total of 1 processors activated (125.00 BogoMIPS). [ 0.084114] CPU: All CPU(s) started in SVC mode. [ 0.094737] devtmpfs: initialized [ 0.114023] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.128887] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.129583] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.134391] pinctrl core: initialized pinctrl subsystem [ 0.149032] NET: Registered protocol family 16 [ 0.164871] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.192737] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.192917] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.194955] Serial: AMBA PL011 UART driver [ 0.212512] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.214674] uart-pl011 3f201000.serial: could not find pctldev for node /soc/address@hidden/uart0_pins, deferring probe [ 0.275732] bcm2835-dma 3f007000.dma: DMA legacy API manager at bc80f000, dmachans=0x1 [ 0.281318] SCSI subsystem initialized [ 0.281989] usbcore: registered new interface driver usbfs [ 0.282345] usbcore: registered new interface driver hub [ 0.282599] usbcore: registered new device driver usb [ 0.290083] raspberrypi-firmware soc:firmware: Attached to firmware from 1970-01-05 00:12 [ 0.301566] nfc: nfc_init: NFC Core ver 0.1 [ 0.302768] NET: Registered protocol family 39 [ 0.305247] clocksource: Switched to clocksource arch_sys_counter [ 0.436205] VFS: Disk quotas dquot_6.6.0 [ 0.436440] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.437199] FS-Cache: Loaded [ 0.437648] CacheFiles: Loaded [ 0.475997] NET: Registered protocol family 2 [ 0.489944] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.490278] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.490569] TCP: Hash tables configured (established 8192 bind 8192) [ 0.491802] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.491980] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.493953] NET: Registered protocol family 1 [ 0.498720] RPC: Registered named UNIX socket transport module. [ 0.498783] RPC: Registered udp transport module. [ 0.498816] RPC: Registered tcp transport module. [ 0.498842] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.940569] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 1 counters available [ 1.947417] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.964161] FS-Cache: Netfs 'nfs' registered for caching [ 1.966264] NFS: Registering the id_resolver key type [ 1.967245] Key type id_resolver registered [ 1.967292] Key type id_legacy registered [ 1.978426] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.979461] io scheduler noop registered [ 1.979523] io scheduler deadline registered [ 1.980244] io scheduler cfq registered (default) [ 1.980298] io scheduler mq-deadline registered [ 1.980335] io scheduler kyber registered [ 1.988118] gpio gpiochip1: GPIO chip parent is NULL [ 1.990325] brcmvirt-gpio soc:virtgpio: Failed to set gpiovirtbuf, trying to get err:0 [ 1.991071] ------------[ cut here ]------------ [ 1.991417] WARNING: CPU: 0 PID: 1 at arch/arm/mm/ioremap.c:303 __arm_ioremap_pfn_caller+0x8c/0x1c4 [ 1.991472] Modules linked in: [ 1.991769] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.6-v7 #2 [ 1.991828] Hardware name: BCM2835 [ 1.992252] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 1.992348] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 1.992423] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 1.992459] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 1.992491] [<8011d6c8>] (warn_slowpath_null) from [<801167c0>] (__arm_ioremap_pfn_caller+0x8c/0x1c4) [ 1.992523] [<801167c0>] (__arm_ioremap_pfn_caller) from [<80116950>] (__arm_ioremap_caller+0x58/0x60) [ 1.992555] [<80116950>] (__arm_ioremap_caller) from [<801169ac>] (ioremap+0x2c/0x30) [ 1.992599] [<801169ac>] (ioremap) from [<804bb3d4>] (brcmvirt_gpio_probe+0x2e8/0x418) [ 1.992633] [<804bb3d4>] (brcmvirt_gpio_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 1.992666] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 1.992697] [<8052c4e0>] (driver_probe_device) from [<8052c65c>] (__driver_attach+0xc8/0xcc) [ 1.992728] [<8052c65c>] (__driver_attach) from [<8052a668>] (bus_for_each_dev+0x78/0xac) [ 1.992758] [<8052a668>] (bus_for_each_dev) from [<8052bdfc>] (driver_attach+0x2c/0x30) [ 1.992789] [<8052bdfc>] (driver_attach) from [<8052b844>] (bus_add_driver+0x114/0x220) [ 1.992819] [<8052b844>] (bus_add_driver) from [<8052ce00>] (driver_register+0x88/0x104) [ 1.992849] [<8052ce00>] (driver_register) from [<8052dea0>] (__platform_driver_register+0x50/0x58) [ 1.992884] [<8052dea0>] (__platform_driver_register) from [<80b31ab8>] (brcmvirt_gpio_driver_init+0x24/0x28) [ 1.992975] [<80b31ab8>] (brcmvirt_gpio_driver_init) from [<80101c1c>] (do_one_initcall+0x54/0x17c) [ 1.993013] [<80101c1c>] (do_one_initcall) from [<80b01058>] (kernel_init_freeable+0x224/0x2b8) [ 1.993044] [<80b01058>] (kernel_init_freeable) from [<807938b0>] (kernel_init+0x18/0x124) [ 1.993075] [<807938b0>] (kernel_init) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 1.993178] ---[ end trace d042f207671d9b6e ]--- [ 1.993295] brcmvirt-gpio soc:virtgpio: Failed to map physical address [ 1.993453] brcmvirt-gpio: probe of soc:virtgpio failed with error -2 [ 1.994792] BCM2708FB: allocated DMA memory fb900000 [ 1.995017] BCM2708FB: allocated DMA channel 0 @ bc80f000 [ 2.007090] Console: switching to colour frame buffer device 100x30 [ 2.014952] bcm2835-aux-uart 3f215040.serial: could not get clk: -517 [ 2.019527] bcm2835-rng 3f104000.rng: hwrng registered [ 2.019891] vc-mem: phys_addr:0x00000000 mem_base=0x00000000 mem_size:0x00000000(0 MiB) [ 2.021073] vc-sm: Videocore shared memory driver [ 2.022036] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 2.054395] brd: module loaded [ 2.071180] loop: module loaded [ 2.071251] Loading iSCSI transport class v2.0-870. [ 2.077096] usbcore: registered new interface driver smsc95xx [ 2.077193] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.281513] Core Release: 0.000 [ 2.281728] Setting default values for core params [ 2.283131] Finished setting default values for core params [ 2.283343] dwc_otg 3f980000.usb: Bad value for SNPSID: 0x00000000 [ 2.284378] dwc_otg: probe of 3f980000.usb failed with error -22 [ 2.284602] dwc_otg: FIQ enabled [ 2.284639] dwc_otg: NAK holdoff enabled [ 2.284666] dwc_otg: FIQ split-transaction FSM enabled [ 2.284729] Module dwc_common_port init [ 2.285685] usbcore: registered new interface driver usb-storage [ 2.286674] mousedev: PS/2 mouse device common for all mice [ 2.288217] IR NEC protocol handler initialized [ 2.288260] IR RC5(x/sz) protocol handler initialized [ 2.288295] IR RC6 protocol handler initialized [ 2.288329] IR JVC protocol handler initialized [ 2.288363] IR Sony protocol handler initialized [ 2.288397] IR SANYO protocol handler initialized [ 2.288436] IR Sharp protocol handler initialized [ 2.288479] IR MCE Keyboard/mouse protocol handler initialized [ 2.288513] IR XMP protocol handler initialized [ 2.290776] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 2.292142] bcm2835-cpufreq: min=700000 max=700000 [ 2.294618] sdhci: Secure Digital Host Controller Interface driver [ 2.294649] sdhci: Copyright(c) Pierre Ossman [ 2.297822] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe [ 2.299413] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 2.299775] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.301216] ledtrig-cpu: registered to indicate activity on CPUs [ 2.301552] hidraw: raw HID events driver (C) Jiri Kosina [ 2.302073] usbcore: registered new interface driver usbhid [ 2.302107] usbhid: USB HID core driver [ 2.304058] vchiq: vchiq_init_state: slot_zero = bb980000, is_master = 0 [ 2.310038] bcm2835_vchiq 3f00b840.vchiq: failed to set channelbase [ 2.310222] vchiq: could not load vchiq [ 2.316335] Initializing XFRM netlink socket [ 2.316612] NET: Registered protocol family 17 [ 2.317482] 9pnet: Installing 9P2000 support [ 2.317730] Key type dns_resolver registered [ 2.318135] Registering SWP/SWPB emulation handler [ 2.319823] registered taskstats version 1 [ 2.423497] bcm2835-clk 3f101000.cprman: plla: couldn't lock PLL [ 2.423723] ------------[ cut here ]------------ [ 2.423772] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 2.423791] Modules linked in: [ 2.423834] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 2.423878] Hardware name: BCM2835 [ 2.424116] Workqueue: events deferred_probe_work_func [ 2.424191] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 2.424231] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 2.424269] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 2.424302] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 2.424335] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 2.424369] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 2.424398] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 2.424428] [<804da0cc>] (devm_clk_hw_register) from [<804ded30>] (bcm2835_register_pll+0xac/0xd4) [ 2.424460] [<804ded30>] (bcm2835_register_pll) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 2.424502] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 2.424534] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 2.424565] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 2.424594] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 2.424623] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 2.424652] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 2.424681] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 2.424710] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 2.424743] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 2.424789] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 2.424823] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 2.424927] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 2.424990] ---[ end trace d042f207671d9b70 ]--- [ 2.525815] bcm2835-clk 3f101000.cprman: pllb: couldn't lock PLL [ 2.525864] ------------[ cut here ]------------ [ 2.525940] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 2.525960] Modules linked in: [ 2.525999] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 2.526015] Hardware name: BCM2835 [ 2.526045] Workqueue: events deferred_probe_work_func [ 2.526099] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 2.526136] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 2.526172] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 2.526204] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 2.526246] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 2.526277] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 2.526305] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 2.526334] [<804da0cc>] (devm_clk_hw_register) from [<804ded30>] (bcm2835_register_pll+0xac/0xd4) [ 2.526364] [<804ded30>] (bcm2835_register_pll) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 2.526394] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 2.526428] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 2.526459] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 2.526561] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 2.526596] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 2.526628] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 2.526658] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 2.526688] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 2.526724] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 2.526758] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 2.526791] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 2.526835] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 2.526856] ---[ end trace d042f207671d9b71 ]--- [ 2.627188] bcm2835-clk 3f101000.cprman: pllc: couldn't lock PLL [ 2.627233] ------------[ cut here ]------------ [ 2.627272] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 2.627290] Modules linked in: [ 2.627329] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 2.627345] Hardware name: BCM2835 [ 2.627372] Workqueue: events deferred_probe_work_func [ 2.627435] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 2.627470] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 2.627503] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 2.627534] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 2.627565] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 2.627600] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 2.627628] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 2.627657] [<804da0cc>] (devm_clk_hw_register) from [<804ded30>] (bcm2835_register_pll+0xac/0xd4) [ 2.627685] [<804ded30>] (bcm2835_register_pll) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 2.627715] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 2.627746] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 2.627776] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 2.627805] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 2.627835] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 2.627864] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 2.627893] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 2.627922] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 2.627978] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 2.628015] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 2.628047] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 2.628102] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 2.628125] ---[ end trace d042f207671d9b72 ]--- [ 2.728409] bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL [ 2.728457] ------------[ cut here ]------------ [ 2.728497] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 2.728514] Modules linked in: [ 2.728552] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 2.728567] Hardware name: BCM2835 [ 2.728593] Workqueue: events deferred_probe_work_func [ 2.728680] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 2.728720] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 2.728757] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 2.728789] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 2.728822] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 2.728855] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 2.728884] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 2.728945] [<804da0cc>] (devm_clk_hw_register) from [<804ded30>] (bcm2835_register_pll+0xac/0xd4) [ 2.728977] [<804ded30>] (bcm2835_register_pll) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 2.729009] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 2.729042] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 2.729073] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 2.729104] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 2.729135] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 2.729166] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 2.729197] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 2.729227] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 2.729273] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 2.729306] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 2.729349] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 2.729383] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 2.729406] ---[ end trace d042f207671d9b73 ]--- [ 2.829610] bcm2835-clk 3f101000.cprman: pllh: couldn't lock PLL [ 2.829658] ------------[ cut here ]------------ [ 2.829699] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 2.829717] Modules linked in: [ 2.829755] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 2.829772] Hardware name: BCM2835 [ 2.829799] Workqueue: events deferred_probe_work_func [ 2.829853] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 2.829894] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 2.829930] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 2.829962] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 2.829995] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 2.830027] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 2.830056] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 2.830086] [<804da0cc>] (devm_clk_hw_register) from [<804ded30>] (bcm2835_register_pll+0xac/0xd4) [ 2.830116] [<804ded30>] (bcm2835_register_pll) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 2.830148] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 2.830180] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 2.830234] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 2.830269] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 2.830324] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 2.830360] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 2.830391] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 2.830422] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 2.830457] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 2.830492] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 2.830525] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 2.830558] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 2.830580] ---[ end trace d042f207671d9b74 ]--- [ 2.931159] bcm2835-clk 3f101000.cprman: plla: couldn't lock PLL [ 2.931208] ------------[ cut here ]------------ [ 2.931249] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 2.931267] Modules linked in: [ 2.931315] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 2.931330] Hardware name: BCM2835 [ 2.931356] Workqueue: events deferred_probe_work_func [ 2.931408] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 2.931443] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 2.931477] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 2.931507] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 2.931538] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 2.931569] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 2.931596] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 2.931626] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 2.931655] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 2.931685] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 2.931716] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 2.931746] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 2.931785] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 2.931831] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 2.931863] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 2.931894] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 2.931924] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 2.931960] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 2.932018] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 2.932055] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 2.932088] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 2.932111] ---[ end trace d042f207671d9b75 ]--- [ 3.032559] bcm2835-clk 3f101000.cprman: plla: couldn't lock PLL [ 3.032609] ------------[ cut here ]------------ [ 3.032649] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 3.032668] Modules linked in: [ 3.032707] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 3.032723] Hardware name: BCM2835 [ 3.032751] Workqueue: events deferred_probe_work_func [ 3.032804] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 3.032841] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 3.032877] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 3.032909] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 3.032941] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 3.032974] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 3.033002] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 3.033033] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 3.033064] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 3.033095] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 3.033128] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 3.033160] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 3.033191] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 3.033222] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 3.033253] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 3.033283] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 3.033314] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 3.033349] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 3.033400] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 3.033435] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 3.033469] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 3.033490] ---[ end trace d042f207671d9b76 ]--- [ 3.133761] bcm2835-clk 3f101000.cprman: pllb: couldn't lock PLL [ 3.133803] ------------[ cut here ]------------ [ 3.133842] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 3.133859] Modules linked in: [ 3.133896] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 3.133911] Hardware name: BCM2835 [ 3.133937] Workqueue: events deferred_probe_work_func [ 3.134049] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 3.134087] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 3.134123] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 3.134155] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 3.134187] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 3.134220] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 3.134249] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 3.134280] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 3.134311] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 3.134353] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 3.134384] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 3.134414] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 3.134444] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 3.134473] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 3.134503] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 3.134535] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 3.134565] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 3.134598] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 3.134631] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 3.134663] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 3.134694] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 3.134715] ---[ end trace d042f207671d9b77 ]--- [ 3.234972] bcm2835-clk 3f101000.cprman: pllc: couldn't lock PLL [ 3.235023] ------------[ cut here ]------------ [ 3.235064] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 3.235082] Modules linked in: [ 3.235125] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 3.235141] Hardware name: BCM2835 [ 3.235170] Workqueue: events deferred_probe_work_func [ 3.235224] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 3.235260] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 3.235296] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 3.235328] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 3.235360] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 3.235393] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 3.235422] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 3.235452] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 3.235483] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 3.235531] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 3.235569] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 3.235627] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 3.235660] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 3.235691] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 3.235746] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 3.235782] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 3.235815] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 3.235852] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 3.235889] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 3.235953] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 3.235990] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 3.236015] ---[ end trace d042f207671d9b78 ]--- [ 3.336379] bcm2835-clk 3f101000.cprman: pllc: couldn't lock PLL [ 3.336427] ------------[ cut here ]------------ [ 3.336480] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 3.336497] Modules linked in: [ 3.336534] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 3.336549] Hardware name: BCM2835 [ 3.336576] Workqueue: events deferred_probe_work_func [ 3.336628] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 3.336665] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 3.336701] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 3.336731] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 3.336761] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 3.336793] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 3.336821] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 3.336850] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 3.336880] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 3.336910] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 3.336940] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 3.337033] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 3.337067] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 3.337108] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 3.337143] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 3.337174] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 3.337205] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 3.337240] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 3.337275] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 3.337308] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 3.337341] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 3.337363] ---[ end trace d042f207671d9b79 ]--- [ 3.437579] bcm2835-clk 3f101000.cprman: pllc: couldn't lock PLL [ 3.437624] ------------[ cut here ]------------ [ 3.437714] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 3.437734] Modules linked in: [ 3.437772] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 3.437788] Hardware name: BCM2835 [ 3.437816] Workqueue: events deferred_probe_work_func [ 3.437870] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 3.437907] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 3.437943] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 3.437975] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 3.438007] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 3.438040] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 3.438069] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 3.438100] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 3.438131] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 3.438164] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 3.438206] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 3.438236] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 3.438265] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 3.438295] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 3.438324] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 3.438353] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 3.438382] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 3.438415] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 3.438448] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 3.438479] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 3.438514] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 3.438535] ---[ end trace d042f207671d9b7a ]--- [ 3.538818] bcm2835-clk 3f101000.cprman: pllc: couldn't lock PLL [ 3.538862] ------------[ cut here ]------------ [ 3.538901] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 3.538918] Modules linked in: [ 3.538955] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 3.538970] Hardware name: BCM2835 [ 3.538997] Workqueue: events deferred_probe_work_func [ 3.539049] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 3.539084] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 3.539118] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 3.539148] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 3.539178] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 3.539246] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 3.539300] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 3.539333] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 3.539365] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 3.539397] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 3.539429] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 3.539461] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 3.539491] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 3.539522] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 3.539553] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 3.539584] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 3.539614] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 3.539649] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 3.539684] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 3.539717] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 3.539750] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 3.539772] ---[ end trace d042f207671d9b7b ]--- [ 3.640043] bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL [ 3.640091] ------------[ cut here ]------------ [ 3.640132] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 3.640150] Modules linked in: [ 3.640199] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 3.640214] Hardware name: BCM2835 [ 3.640240] Workqueue: events deferred_probe_work_func [ 3.640292] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 3.640327] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 3.640361] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 3.640392] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 3.640424] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 3.640455] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 3.640483] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 3.640512] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 3.640542] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 3.640572] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 3.640604] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 3.640634] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 3.640664] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 3.640693] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 3.640723] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 3.640752] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 3.640781] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 3.640813] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 3.640870] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 3.640928] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 3.640962] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 3.640985] ---[ end trace d042f207671d9b7c ]--- [ 3.741219] bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL [ 3.741255] ------------[ cut here ]------------ [ 3.741289] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 3.741306] Modules linked in: [ 3.741341] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 3.741356] Hardware name: BCM2835 [ 3.741380] Workqueue: events deferred_probe_work_func [ 3.741451] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 3.741491] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 3.741527] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 3.741559] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 3.741591] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 3.741624] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 3.741654] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 3.741685] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 3.741739] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 3.741775] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 3.741808] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 3.741839] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 3.741870] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 3.741901] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 3.741932] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 3.741963] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 3.741993] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 3.742028] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 3.742063] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 3.742096] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 3.742140] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 3.742160] ---[ end trace d042f207671d9b7d ]--- [ 3.842505] bcm2835-clk 3f101000.cprman: pllh: couldn't lock PLL [ 3.842552] ------------[ cut here ]------------ [ 3.842591] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 3.842608] Modules linked in: [ 3.842645] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 3.842660] Hardware name: BCM2835 [ 3.842687] Workqueue: events deferred_probe_work_func [ 3.842739] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 3.842774] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 3.842808] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 3.842839] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 3.842869] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 3.842900] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 3.842927] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 3.842981] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 3.843036] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 3.843071] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 3.843105] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 3.843137] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 3.843167] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 3.843199] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 3.843231] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 3.843261] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 3.843292] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 3.843327] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 3.843372] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 3.843403] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 3.843435] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 3.843478] ---[ end trace d042f207671d9b7e ]--- [ 3.943913] bcm2835-clk 3f101000.cprman: pllh: couldn't lock PLL [ 3.943959] ------------[ cut here ]------------ [ 3.943998] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 3.944015] Modules linked in: [ 3.944052] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 3.944067] Hardware name: BCM2835 [ 3.944116] Workqueue: events deferred_probe_work_func [ 3.944171] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 3.944206] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 3.944240] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 3.944271] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 3.944301] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 3.944332] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 3.944360] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 3.944390] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 3.944419] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 3.944450] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 3.944482] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 3.944512] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 3.944542] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 3.944593] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 3.944628] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 3.944659] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 3.944690] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 3.944726] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 3.944761] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 3.944794] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 3.944828] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 3.944849] ---[ end trace d042f207671d9b7f ]--- [ 4.045195] bcm2835-clk 3f101000.cprman: pllh: couldn't lock PLL [ 4.045238] ------------[ cut here ]------------ [ 4.045276] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 4.045294] Modules linked in: [ 4.045331] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 4.045347] Hardware name: BCM2835 [ 4.045375] Workqueue: events deferred_probe_work_func [ 4.045428] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 4.045466] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 4.045502] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 4.045543] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 4.045574] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 4.045604] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 4.045632] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 4.045661] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 4.045690] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 4.045721] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 4.045753] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 4.045784] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 4.045814] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 4.045844] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 4.045873] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 4.045902] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 4.045957] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 4.045991] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 4.046025] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 4.046056] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 4.046088] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 4.046109] ---[ end trace d042f207671d9b80 ]--- [ 4.150005] bcm2835-clk 3f101000.cprman: plla: couldn't lock PLL [ 4.150058] ------------[ cut here ]------------ [ 4.150100] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 4.150117] Modules linked in: [ 4.150158] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 4.150174] Hardware name: BCM2835 [ 4.150203] Workqueue: events deferred_probe_work_func [ 4.150259] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 4.150296] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 4.150332] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 4.150364] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 4.150397] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 4.150430] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 4.150461] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 4.150493] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 4.150525] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 4.150557] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 4.150591] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 4.150623] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 4.150684] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 4.150717] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 4.150770] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 4.150807] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 4.150838] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 4.150874] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 4.150909] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 4.150943] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 4.150976] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 4.150998] ---[ end trace d042f207671d9b81 ]--- [ 4.251318] bcm2835-clk 3f101000.cprman: plla: couldn't lock PLL [ 4.251372] ------------[ cut here ]------------ [ 4.251438] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 4.251456] Modules linked in: [ 4.251512] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 4.251529] Hardware name: BCM2835 [ 4.251559] Workqueue: events deferred_probe_work_func [ 4.251613] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 4.251650] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 4.251686] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 4.251718] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 4.251765] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 4.251799] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 4.251828] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 4.251869] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 4.251903] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 4.251935] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 4.251967] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 4.251999] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 4.252030] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 4.252061] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 4.252093] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 4.252124] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 4.252154] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 4.252191] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 4.252238] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 4.252272] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 4.252306] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 4.252328] ---[ end trace d042f207671d9b82 ]--- [ 4.354531] bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL [ 4.354603] ------------[ cut here ]------------ [ 4.354647] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 4.354666] Modules linked in: [ 4.354721] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 4.354736] Hardware name: BCM2835 [ 4.354820] Workqueue: events deferred_probe_work_func [ 4.354882] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 4.354921] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 4.354959] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 4.354993] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 4.355027] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 4.355062] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 4.355093] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 4.355139] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 4.355170] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 4.355202] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 4.355235] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 4.355268] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 4.355298] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 4.355330] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 4.355361] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 4.355392] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 4.355423] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 4.355458] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 4.355493] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 4.355527] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 4.355560] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 4.355606] ---[ end trace d042f207671d9b83 ]--- [ 4.456027] bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL [ 4.456074] ------------[ cut here ]------------ [ 4.456113] WARNING: CPU: 0 PID: 14 at drivers/clk/clk.c:652 clk_core_enable+0xb4/0x220 [ 4.456130] Modules linked in: [ 4.456170] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 4.456185] Hardware name: BCM2835 [ 4.456213] Workqueue: events deferred_probe_work_func [ 4.456264] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 4.456299] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 4.456362] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 4.456398] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 4.456430] [<8011d6c8>] (warn_slowpath_null) from [<804d7890>] (clk_core_enable+0xb4/0x220) [ 4.456463] [<804d7890>] (clk_core_enable) from [<804d9ef0>] (clk_register+0x4e4/0x650) [ 4.456492] [<804d9ef0>] (clk_register) from [<804da0cc>] (devm_clk_hw_register+0x4c/0x90) [ 4.456522] [<804da0cc>] (devm_clk_hw_register) from [<804df128>] (bcm2835_register_pll_divider+0x110/0x184) [ 4.456553] [<804df128>] (bcm2835_register_pll_divider) from [<804df4ac>] (bcm2835_clk_probe+0x180/0x234) [ 4.456584] [<804df4ac>] (bcm2835_clk_probe) from [<8052df54>] (platform_drv_probe+0x60/0xc0) [ 4.456643] [<8052df54>] (platform_drv_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 4.456690] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 4.456719] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 4.456750] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 4.456780] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 4.456810] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 4.456839] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 4.456873] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 4.456907] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 4.456940] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 4.456972] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 4.456994] ---[ end trace d042f207671d9b84 ]--- [ 4.462551] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 4.463403] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 4.464391] ------------[ cut here ]------------ [ 4.464433] WARNING: CPU: 0 PID: 14 at drivers/tty/serial/serial_core.c:463 uart_get_baud_rate+0xfc/0x160 [ 4.464452] Modules linked in: [ 4.464505] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G W 4.14.6-v7 #2 [ 4.464521] Hardware name: BCM2835 [ 4.464549] Workqueue: events deferred_probe_work_func [ 4.464621] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 4.464659] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 4.464692] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 4.464723] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 4.464753] [<8011d6c8>] (warn_slowpath_null) from [<8050a424>] (uart_get_baud_rate+0xfc/0x160) [ 4.464787] [<8050a424>] (uart_get_baud_rate) from [<80515c90>] (pl011_set_termios+0x58/0x384) [ 4.464818] [<80515c90>] (pl011_set_termios) from [<8050a77c>] (uart_set_options+0xf0/0x124) [ 4.464851] [<8050a77c>] (uart_set_options) from [<80b34a4c>] (pl011_console_setup+0x268/0x270) [ 4.464884] [<80b34a4c>] (pl011_console_setup) from [<8017353c>] (register_console+0x314/0x42c) [ 4.464916] [<8017353c>] (register_console) from [<8050e224>] (uart_add_one_port+0x460/0x518) [ 4.464946] [<8050e224>] (uart_add_one_port) from [<805173f0>] (pl011_register_port+0x6c/0xc4) [ 4.464976] [<805173f0>] (pl011_register_port) from [<805175bc>] (pl011_probe+0x174/0x18c) [ 4.465005] [<805175bc>] (pl011_probe) from [<804d3774>] (amba_probe+0xe8/0x164) [ 4.465035] [<804d3774>] (amba_probe) from [<8052c4e0>] (driver_probe_device+0x244/0x2f8) [ 4.465066] [<8052c4e0>] (driver_probe_device) from [<8052c708>] (__device_attach_driver+0xa8/0xdc) [ 4.465095] [<8052c708>] (__device_attach_driver) from [<8052a738>] (bus_for_each_drv+0x70/0xa4) [ 4.465184] [<8052a738>] (bus_for_each_drv) from [<8052c150>] (__device_attach+0xc0/0x124) [ 4.465219] [<8052c150>] (__device_attach) from [<8052c798>] (device_initial_probe+0x1c/0x20) [ 4.465252] [<8052c798>] (device_initial_probe) from [<8052b620>] (bus_probe_device+0x94/0x9c) [ 4.465284] [<8052b620>] (bus_probe_device) from [<8052bad0>] (deferred_probe_work_func+0x68/0x150) [ 4.465320] [<8052bad0>] (deferred_probe_work_func) from [<80136ee4>] (process_one_work+0x224/0x518) [ 4.465356] [<80136ee4>] (process_one_work) from [<80137ebc>] (worker_thread+0x60/0x5f0) [ 4.465391] [<80137ebc>] (worker_thread) from [<8013d6b4>] (kthread+0x144/0x174) [ 4.465426] [<8013d6b4>] (kthread) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 4.465555] ---[ end trace d042f207671d9b85 ]--- [ 4.557752] console [ttyAMA0] enabled [ 4.561748] bcm2835-aux-uart 3f215040.serial: unable to register 8250 port - -28 [ 4.562202] bcm2835-aux-uart: probe of 3f215040.serial failed with error -28 [ 4.562771] bcm2835_thermal 3f212000.thermal: Clock tsens running at 0 Hz is outside of the recommended range: 1.92 to 5MHz [ 4.563424] thermal thermal_zone0: failed to read out thermal zone (-5) [ 4.563786] bcm2835_thermal 3f212000.thermal: Not able to read trip_temp: -33 [ 4.564094] bcm2835_thermal: probe of 3f212000.thermal failed with error -33 [ 4.566275] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 4.566421] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 4.637447] sdhost: log_buf @ bb910000 (fb910000) [ 4.715844] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 4.717752] of_cfs_init [ 4.719695] of_cfs_init: OK [ 4.724856] uart-pl011 3f201000.serial: no DMA platform data [ 4.725569] ------------[ cut here ]------------ [ 4.725730] WARNING: CPU: 0 PID: 1 at drivers/tty/serial/serial_core.c:463 uart_get_baud_rate+0xfc/0x160 [ 4.725968] Modules linked in: [ 4.726108] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.6-v7 #2 [ 4.726265] Hardware name: BCM2835 [ 4.726401] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 4.726594] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 4.726776] [<8077e8bc>] (dump_stack) from [<8011d5e0>] (__warn+0xf8/0x110) [ 4.727022] [<8011d5e0>] (__warn) from [<8011d6c8>] (warn_slowpath_null+0x30/0x38) [ 4.727207] [<8011d6c8>] (warn_slowpath_null) from [<8050a424>] (uart_get_baud_rate+0xfc/0x160) [ 4.727411] [<8050a424>] (uart_get_baud_rate) from [<80515c90>] (pl011_set_termios+0x58/0x384) [ 4.727609] [<80515c90>] (pl011_set_termios) from [<8050aa58>] (uart_change_speed+0x40/0xfc) [ 4.727836] [<8050aa58>] (uart_change_speed) from [<8050dc40>] (uart_startup.part.4+0xb8/0x14c) [ 4.728056] [<8050dc40>] (uart_startup.part.4) from [<8050dd34>] (uart_port_activate+0x60/0x6c) [ 4.728256] [<8050dd34>] (uart_port_activate) from [<804f7e58>] (tty_port_open+0xa0/0xe4) [ 4.728452] [<804f7e58>] (tty_port_open) from [<8050c96c>] (uart_open+0x40/0x48) [ 4.728631] [<8050c96c>] (uart_open) from [<804f0a90>] (tty_open+0xe8/0x3cc) [ 4.728851] [<804f0a90>] (tty_open) from [<8028f2fc>] (chrdev_open+0xd4/0x190) [ 4.729037] [<8028f2fc>] (chrdev_open) from [<80286d18>] (do_dentry_open.constprop.3+0x218/0x324) [ 4.729240] [<80286d18>] (do_dentry_open.constprop.3) from [<80287d20>] (vfs_open+0x50/0x84) [ 4.729434] [<80287d20>] (vfs_open) from [<80299840>] (path_openat+0x40c/0xf48) [ 4.729612] [<80299840>] (path_openat) from [<8029b2f0>] (do_filp_open+0x74/0xd8) [ 4.729821] [<8029b2f0>] (do_filp_open) from [<80288100>] (do_sys_open+0x124/0x1d4) [ 4.730055] [<80288100>] (do_sys_open) from [<802881d8>] (SyS_open+0x28/0x2c) [ 4.730236] [<802881d8>] (SyS_open) from [<80b01084>] (kernel_init_freeable+0x250/0x2b8) [ 4.730431] [<80b01084>] (kernel_init_freeable) from [<807938b0>] (kernel_init+0x18/0x124) [ 4.730625] [<807938b0>] (kernel_init) from [<8010810c>] (ret_from_fork+0x14/0x28) [ 4.730848] ---[ end trace d042f207671d9b86 ]--- [ 4.881076] Freeing unused kernel memory: 14336K [ 4.993267] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 4.993267] [ 4.993514] CPU: 0 PID: 1 Comm: init Tainted: G W 4.14.6-v7 #2 [ 4.993638] Hardware name: BCM2835 [ 4.993748] [<80110020>] (unwind_backtrace) from [<8010c274>] (show_stack+0x20/0x24) [ 4.993904] [<8010c274>] (show_stack) from [<8077e8bc>] (dump_stack+0xc8/0x10c) [ 4.994076] [<8077e8bc>] (dump_stack) from [<8011d7c0>] (panic+0xf0/0x260) [ 4.994239] [<8011d7c0>] (panic) from [<80122104>] (complete_and_exit+0x0/0x2c) [ 4.994377] [<80122104>] (complete_and_exit) from [<801221a0>] (do_group_exit+0x50/0xe4) [ 4.994564] [<801221a0>] (do_group_exit) from [<8012d5d0>] (get_signal+0x35c/0x69c) [ 4.994707] [<8012d5d0>] (get_signal) from [<8010b320>] (do_signal+0xd4/0x3d4) [ 4.994861] [<8010b320>] (do_signal) from [<8010b804>] (do_work_pending+0xb4/0xcc) [ 4.994997] [<8010b804>] (do_work_pending) from [<80108094>] (slow_work_pending+0xc/0x20) [ 4.995822] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 4.995822] [ 15.234783] mmc1: Timeout waiting for hardware interrupt.