qemu-s390x
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[qemu-s390x] [PATCH v8 05/13] s390-ccw: move auxiliary IPL data to separ


From: Collin L. Walling
Subject: [qemu-s390x] [PATCH v8 05/13] s390-ccw: move auxiliary IPL data to separate location
Date: Wed, 21 Feb 2018 14:35:44 -0500

The s390-ccw firmware needs some information in support of the
boot process which is not available on the native machine.
Examples are the netboot firmware load address and now the
boot menu parameters.

While storing that data in unused fields of the IPL parameter block
works, that approach could create problems if the parameter block
definition should change in the future. Because then a guest could
overwrite these fields using the set IPLB diagnose.

In fact the data in question is of more global nature and not really
tied to an IPL device, so separating it is rather logical.

This commit introduces a new structure to hold firmware relevant
IPL parameters set by QEMU. The data is stored at location 204 (dec)
and can contain up to 7 32-bit words. This area is available to
programming in the z/Architecture Principles of Operation and
can thus safely be used by the firmware until the IPL has completed.

Signed-off-by: Viktor Mihajlovski <address@hidden>
Signed-off-by: Collin L. Walling <address@hidden>
---
 hw/s390x/ipl.c          | 18 +++++++++++++++++-
 hw/s390x/ipl.h          | 25 +++++++++++++++++++++++--
 pc-bios/s390-ccw/iplb.h | 18 ++++++++++++++++--
 pc-bios/s390-ccw/main.c |  6 +++++-
 4 files changed, 61 insertions(+), 6 deletions(-)

diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
index 0d06fc1..79f5a58 100644
--- a/hw/s390x/ipl.c
+++ b/hw/s390x/ipl.c
@@ -399,6 +399,21 @@ void s390_reipl_request(void)
     qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
 }
 
+static void s390_ipl_prepare_qipl(S390CPU *cpu)
+{
+    S390IPLState *ipl = get_ipl_device();
+    uint8_t *addr;
+    uint64_t len = 4096;
+
+    addr = cpu_physical_memory_map(cpu->env.psa, &len, 1);
+    if (!addr || len < QIPL_ADDRESS + sizeof(QemuIplParameters)) {
+        error_report("Cannot set QEMU IPL parameters");
+        return;
+    }
+    memcpy(addr + QIPL_ADDRESS, &ipl->qipl, sizeof(QemuIplParameters));
+    cpu_physical_memory_unmap(addr, len, 1, len);
+}
+
 void s390_ipl_prepare_cpu(S390CPU *cpu)
 {
     S390IPLState *ipl = get_ipl_device();
@@ -418,8 +433,9 @@ void s390_ipl_prepare_cpu(S390CPU *cpu)
             error_report_err(err);
             vm_stop(RUN_STATE_INTERNAL_ERROR);
         }
-        ipl->iplb.ccw.netboot_start_addr = cpu_to_be64(ipl->start_addr);
+        ipl->qipl.netboot_start_addr = cpu_to_be64(ipl->start_addr);
     }
+    s390_ipl_prepare_qipl(cpu);
 }
 
 static void s390_ipl_reset(DeviceState *dev)
diff --git a/hw/s390x/ipl.h b/hw/s390x/ipl.h
index 8a705e0..08926a3 100644
--- a/hw/s390x/ipl.h
+++ b/hw/s390x/ipl.h
@@ -16,8 +16,7 @@
 #include "cpu.h"
 
 struct IplBlockCcw {
-    uint64_t netboot_start_addr;
-    uint8_t  reserved0[77];
+    uint8_t  reserved0[85];
     uint8_t  ssid;
     uint16_t devno;
     uint8_t  vm_flags;
@@ -90,6 +89,27 @@ void s390_ipl_prepare_cpu(S390CPU *cpu);
 IplParameterBlock *s390_ipl_get_iplb(void);
 void s390_reipl_request(void);
 
+#define QIPL_ADDRESS  0xcc
+
+/*
+ * The QEMU IPL Parameters will be stored at absolute address
+ * 204 (0xcc) which means it is 32-bit word aligned but not
+ * double-word aligned.
+ * Placement of data fields in this area must account for
+ * their alignment needs. E.g., netboot_start_address must
+ * have an offset of n * 8 bytes within the struct in order
+ * to keep it double-word aligned.
+ * The total size of the struct must never exceed 28 bytes.
+ * This definition must be kept in sync with the defininition
+ * in pc-bios/s390-ccw/iplb.h.
+ */
+struct QemuIplParameters {
+    uint8_t  reserved1[4];
+    uint64_t netboot_start_addr;
+    uint8_t  reserved2[16];
+} QEMU_PACKED;
+typedef struct QemuIplParameters QemuIplParameters;
+
 #define TYPE_S390_IPL "s390-ipl"
 #define S390_IPL(obj) OBJECT_CHECK(S390IPLState, (obj), TYPE_S390_IPL)
 
@@ -105,6 +125,7 @@ struct S390IPLState {
     bool iplb_valid;
     bool reipl_requested;
     bool netboot;
+    QemuIplParameters qipl;
 
     /*< public >*/
     char *kernel;
diff --git a/pc-bios/s390-ccw/iplb.h b/pc-bios/s390-ccw/iplb.h
index 890aed9..31d2934 100644
--- a/pc-bios/s390-ccw/iplb.h
+++ b/pc-bios/s390-ccw/iplb.h
@@ -13,8 +13,7 @@
 #define IPLB_H
 
 struct IplBlockCcw {
-    uint64_t netboot_start_addr;
-    uint8_t  reserved0[77];
+    uint8_t  reserved0[85];
     uint8_t  ssid;
     uint16_t devno;
     uint8_t  vm_flags;
@@ -73,6 +72,21 @@ typedef struct IplParameterBlock IplParameterBlock;
 
 extern IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
 
+#define QIPL_ADDRESS  0xcc
+
+/*
+ * This definition must be kept in sync with the defininition
+ * in hw/s390x/ipl.h
+ */
+struct QemuIplParameters {
+    uint8_t  reserved1[4];
+    uint64_t netboot_start_addr;
+    uint8_t  reserved2[16];
+} __attribute__ ((packed));
+typedef struct QemuIplParameters QemuIplParameters;
+
+extern QemuIplParameters qipl;
+
 #define S390_IPL_TYPE_FCP 0x00
 #define S390_IPL_TYPE_CCW 0x02
 #define S390_IPL_TYPE_QEMU_SCSI 0xff
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index e857ce4..e41b264 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -16,6 +16,7 @@ char stack[PAGE_SIZE * 8] 
__attribute__((__aligned__(PAGE_SIZE)));
 static SubChannelId blk_schid = { .one = 1 };
 IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
 static char loadparm[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+QemuIplParameters qipl;
 
 /*
  * Priniciples of Operations (SA22-7832-09) chapter 17 requires that
@@ -81,6 +82,7 @@ static void virtio_setup(void)
     uint16_t dev_no;
     char ldp[] = "LOADPARM=[________]\n";
     VDev *vdev = virtio_get_device();
+    QemuIplParameters *early_qipl = (QemuIplParameters *)QIPL_ADDRESS;
 
     /*
      * We unconditionally enable mss support. In every sane configuration,
@@ -93,6 +95,8 @@ static void virtio_setup(void)
     memcpy(ldp + 10, loadparm, 8);
     sclp_print(ldp);
 
+    memcpy(&qipl, early_qipl, sizeof(QemuIplParameters));
+
     if (store_iplb(&iplb)) {
         switch (iplb.pbt) {
         case S390_IPL_TYPE_CCW:
@@ -127,7 +131,7 @@ static void virtio_setup(void)
 
     if (virtio_get_device_type() == VIRTIO_ID_NET) {
         sclp_print("Network boot device detected\n");
-        vdev->netboot_start_addr = iplb.ccw.netboot_start_addr;
+        vdev->netboot_start_addr = qipl.netboot_start_addr;
     } else {
         virtio_blk_setup_device(blk_schid);
 
-- 
2.7.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]