qemu-stable
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-stable] [PATCH 22/60] uhci: Raise interrupt when requested even fo


From: Michael Tokarev
Subject: [Qemu-stable] [PATCH 22/60] uhci: Raise interrupt when requested even for non active tds
Date: Mon, 4 Feb 2013 14:40:32 +0400

From: Hans de Goede <address@hidden>

According to the spec we must raise an interrupt when one is requested
even for non active tds.

Linux depends on this, for bulk transfers it runs an inactivity timer
to work around a bug in early uhci revisions, when we take longer then
200 ms to process a packet, this timer goes of, and as part of the
handling Linux then unlinks the qh, and relinks it after the frindex
has increased by atleast 1, the problem is Linux only checks for the
frindex increases on an interrupt, and we don't send that, causing
the qh to go inactive for more then 32 frames, at which point we
consider the packet cancelled.

Signed-off-by: Hans de Goede <address@hidden>
Signed-off-by: Gerd Hoffmann <address@hidden>
(cherry picked from commit 883bca776daa43111e9c39008f0038f7c62ae723)

Signed-off-by: Michael Tokarev <address@hidden>
---
 hw/usb/hcd-uhci.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c
index 3803f52..a8bb164 100644
--- a/hw/usb/hcd-uhci.c
+++ b/hw/usb/hcd-uhci.c
@@ -806,8 +806,16 @@ static int uhci_handle_td(UHCIState *s, uint32_t addr, 
UHCI_TD *td,
     USBEndpoint *ep;
 
     /* Is active ? */
-    if (!(td->ctrl & TD_CTRL_ACTIVE))
+    if (!(td->ctrl & TD_CTRL_ACTIVE)) {
+        /*
+         * ehci11d spec page 22: "Even if the Active bit in the TD is already
+         * cleared when the TD is fetched ... an IOC interrupt is generated"
+         */
+        if (td->ctrl & TD_CTRL_IOC) {
+                *int_mask |= 0x01;
+        }
         return TD_RESULT_NEXT_QH;
+    }
 
     async = uhci_async_find_td(s, addr, td);
     if (async) {
-- 
1.7.10.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]