qemu-trivial
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-trivial] [Qemu-devel] [PATCH 08/10] sm501: Add support for pan


From: Peter Maydell
Subject: Re: [Qemu-trivial] [Qemu-devel] [PATCH 08/10] sm501: Add support for panel layer
Date: Fri, 24 Feb 2017 14:52:53 +0000

On 19 February 2017 at 16:35, BALATON Zoltan <address@hidden> wrote:
> Signed-off-by: BALATON Zoltan <address@hidden>
> ---
>  hw/display/sm501.c | 73 
> +++++++++++++++++++++++++++---------------------------
>  1 file changed, 37 insertions(+), 36 deletions(-)
>
> diff --git a/hw/display/sm501.c b/hw/display/sm501.c
> index 1bd0303..2e1c4b7 100644
> --- a/hw/display/sm501.c
> +++ b/hw/display/sm501.c
> @@ -2,6 +2,7 @@
>   * QEMU SM501 Device
>   *
>   * Copyright (c) 2008 Shin-ichiro KAWASAKI
> + * Copyright (c) 2016 BALATON Zoltan
>   *
>   * Permission is hereby granted, free of charge, to any person obtaining a 
> copy
>   * of this software and associated documentation files (the "Software"), to 
> deal
> @@ -41,8 +42,11 @@
>   *   - Minimum implementation for Linux console : mmio regs and CRT layer.
>   *   - 2D graphics acceleration partially supported : only fill rectangle.
>   *
> - * TODO:
> + * Status: 2016/12/04
> + *   - Misc fixes: endianness, hardware cursor
>   *   - Panel support
> + *
> + * TODO:
>   *   - Touch panel support
>   *   - USB support
>   *   - UART support
> @@ -1297,53 +1301,62 @@ static inline int get_depth_index(DisplaySurface 
> *surface)
>      }
>  }
>
> -static void sm501_draw_crt(SM501State *s)
> +static void sm501_update_display(void *opaque)
>  {
> +    SM501State *s = (SM501State *)opaque;
>      DisplaySurface *surface = qemu_console_surface(s->con);
>      int y, c_x, c_y;
> -    uint8_t *hwc_src, *src = s->local_mem;
> -    int width = get_width(s, 1);
> -    int height = get_height(s, 1);
> -    int src_bpp = get_bpp(s, 1);
> +    int crt = (s->dc_crt_control & SM501_DC_CRT_CONTROL_SEL) ? 1 : 0;
> +    int width = get_width(s, crt);
> +    int height = get_height(s, crt);
> +    int src_bpp = get_bpp(s, crt);
>      int dst_bpp = surface_bytes_per_pixel(surface);
> -    uint32_t *palette = (uint32_t *)&s->dc_palette[SM501_DC_CRT_PALETTE -
> -                                                   SM501_DC_PANEL_PALETTE];
> -    uint8_t hwc_palette[3 * 3];
> -    int ds_depth_index = get_depth_index(surface);
> +    int dst_depth_index = get_depth_index(surface);

Please don't change variable names in the middle of a patch that's
adding new functionality, it makes the patch harder to review.

>      draw_line_func *draw_line = NULL;
>      draw_hwc_line_func *draw_hwc_line = NULL;
>      int full_update = 0;
>      int y_start = -1;
>      ram_addr_t page_min = ~0l;
>      ram_addr_t page_max = 0l;
> -    ram_addr_t offset = 0;
> +    ram_addr_t offset;
> +    uint32_t *palette;
> +    uint8_t hwc_palette[3 * 3];
> +    uint8_t *hwc_src;
> +
> +    if (!((crt ? s->dc_crt_control : s->dc_panel_control)
> +          & SM501_DC_CRT_CONTROL_ENABLE)) {
> +        return;
> +    }
> +
> +    palette = (uint32_t *)(crt ? &s->dc_palette[SM501_DC_CRT_PALETTE -
> +                                                SM501_DC_PANEL_PALETTE]
> +                               : &s->dc_palette[0]);
>
>      /* choose draw_line function */
>      switch (src_bpp) {
>      case 1:
> -        draw_line = draw_line8_funcs[ds_depth_index];
> +        draw_line = draw_line8_funcs[dst_depth_index];
>          break;
>      case 2:
> -        draw_line = draw_line16_funcs[ds_depth_index];
> +        draw_line = draw_line16_funcs[dst_depth_index];
>          break;
>      case 4:
> -        draw_line = draw_line32_funcs[ds_depth_index];
> +        draw_line = draw_line32_funcs[dst_depth_index];
>          break;
>      default:
> -        printf("sm501 draw crt : invalid DC_CRT_CONTROL=%x.\n",
> -               s->dc_crt_control);
> +        printf("sm501 update display : invalid control register value.\n");

This shouldn't be in the same patch as "add panel" either.

>          abort();
>          break;
>      }
>
>      /* set up to draw hardware cursor */
> -    if (is_hwc_enabled(s, 1)) {
> +    if (is_hwc_enabled(s, crt)) {
>          /* choose cursor draw line function */
> -        draw_hwc_line = draw_hwc_line_funcs[ds_depth_index];
> -        hwc_src = get_hwc_address(s, 1);
> -        c_x = get_hwc_x(s, 1);
> -        c_y = get_hwc_y(s, 1);
> -        get_hwc_palette(s, 1, hwc_palette);
> +        draw_hwc_line = draw_hwc_line_funcs[dst_depth_index];
> +        hwc_src = get_hwc_address(s, crt);
> +        c_x = get_hwc_x(s, crt);
> +        c_y = get_hwc_y(s, crt);
> +        get_hwc_palette(s, crt, hwc_palette);
>      }
>
>      /* adjust console size */
> @@ -1357,7 +1370,7 @@ static void sm501_draw_crt(SM501State *s)
>
>      /* draw each line according to conditions */
>      memory_region_sync_dirty_bitmap(&s->local_mem_region);
> -    for (y = 0; y < height; y++) {
> +    for (y = 0, offset = 0; y < height; y++, offset += width * src_bpp) {
>          int update, update_hwc;
>          ram_addr_t page0 = offset;
>          ram_addr_t page1 = offset + width * src_bpp - 1;
> @@ -1375,7 +1388,7 @@ static void sm501_draw_crt(SM501State *s)
>              d +=  y * width * dst_bpp;
>
>              /* draw graphics layer */
> -            draw_line(d, src, width, palette);
> +            draw_line(d, s->local_mem + offset, width, palette);
>
>              /* draw hardware cursor */
>              if (update_hwc) {
> @@ -1398,9 +1411,6 @@ static void sm501_draw_crt(SM501State *s)
>                  y_start = -1;
>              }
>          }
> -
> -        src += width * src_bpp;
> -        offset += width * src_bpp;
>      }
>
>      /* complete flush to display */
> @@ -1416,15 +1426,6 @@ static void sm501_draw_crt(SM501State *s)
>      }
>  }
>
> -static void sm501_update_display(void *opaque)
> -{
> -    SM501State *s = (SM501State *)opaque;
> -
> -    if (s->dc_crt_control & SM501_DC_CRT_CONTROL_ENABLE) {
> -        sm501_draw_crt(s);
> -    }
> -}
> -
>  static const GraphicHwOps sm501_ops = {
>      .gfx_update  = sm501_update_display,
>  };
> --
> 2.7.4
>

thanks
-- PMM



reply via email to

[Prev in Thread] Current Thread [Next in Thread]