[Savannah-register-public] [task #5162] Submission of Tembaga2

[Tembaga2]

URL:
  <http://savannah.gnu.org/task/?func=detailitem&item_id=5162>

                 Summary: Submission of Tembaga2
                 Project: Savannah Administration
            Submitted by: tembaga2
            Submitted on: Tue 01/17/06 at 16:18
         Should Start On: Tue 01/17/06 at 00:00
   Should be Finished on: Fri 01/27/06 at 00:00
                Category: Project Approval
                Priority: 5 - Normal
                  Status: None
                 Privacy: Public
             Assigned to: None
        Percent Complete: 0%
             Open/Closed: Open
                  Effort: 0.00

    _______________________________________________________

Details:

A new project has been registered at Savannah 
The project account will remain inactive until a site admin approve or
discard the registration.


######### REGISTRATION ADMINISTRATION #########

While this item will be useful to track the registration process, approving
or discarding the registration must be done using the specific "Group
Administration" page, accessible only to site administrators, effectively
logged as site administrators (superuser):

  <https://savannah.gnu.org/admin/groupedit.php?group_id=8286>


######### REGISTRATION DETAILS ######### 

Full Name:
----------
  Tembaga2

System Group Name:
-----------------
  tembaga2

Type:
-----
  non-GNU software & documentation

License:
-------- 
  GNU General Public License V2 or later

Description:
------------
  I hereby will like to request Savannah to host my new firmware development
project called Tembaga2 or T2 in short. An official released T2 package will
contain its GPLed source codes and GPLed binaries firmware to support many
different brands/models of 54G WiFi routers, i.e. Linksys (WRT54G/S),
Motorola (WA840G/P, WR8x0G/P), Netgear (FWAG114, WG602, WGR6x4), etc., which
are built on some Broadcom WiFi CPUs, i.e. BCM-4712, BCM-5325E, etc. The
original T2 package source code is 100% based on the final released DD-WRT
v23 GPLed source code. The main web page of DD-WRT is http://www.dd-wrt.com
and its DD-WRT v23 GPLed source code can be downloaded from here
http://dd-wrt.gruftie.com/dd-wrtv2/downloads/index.php?path=sourcecode%2F&download=DD-WRT.v23-final.tar.bz2.

I am not related to DD-WRT nor have I ever participated in any of its
development. One of my reasons to initiate this development is mainly due to
the fact that DD-WRT doesn't seem to provide a real-time access to its source
code repositories, i.e. no CVS, for publics to access and to participate to
speed up in the development. The other reason is to re-develop this firmware
to include a support for a U.S. Robotics 5461 Router + USB Printer Server to
host some CreativeLabs USB VoIPBlaster VoIP devices. The source code of a U.S
Robotics 5461 firmware has been GPLed and released by U.S. Robotics and it can
be obtained from
http://www.usr.com/support/gpl/5461_v3.91.37.0.2_rel1.0.tar.gz . For the
CreativeLabs USB VoIPBlaster device, its USB driver source code has been
GPLed by it author and can be obtained from
http://sourceforge.net/project/showfiles.php?group_id=54066&package_id=48670&release_id=284865
. I believe once my T2 package is hosted here, it will be freely accessible by
anyone through its depository links, your FTP servers, and CVS trees. This
way, we all can participate to speed up the development process. Since DD-WRT
is released under a GPL, I will also honor and release my T2 package under
GPL.

Should you have any further question regarding my request(s) and/or my T2
package, please don't hesitate to contact me at address@hidden








    _______________________________________________________

Reply to this item at:

  <http://savannah.gnu.org/task/?func=detailitem&item_id=5162>

_______________________________________________
  Message sent via/by Savannah
  http://savannah.gnu.org/