Re: [Sipwitch-devel] build problem

[Perazim]

David,

You may remember several months ago I was trying to use sipwitch and
having lots of NAT related problems. When I was unable to get around
these issues, I tried several other sip server also with numerous
troubles mostly related to NAT. So I put up a vpn and ran the voip over
that and the problems went away.

Now my target is to get a sip simple sip server running on Openwrt
router firmware on hardware that has 4mb flash and 32mb ram. This means
cross compiling sipwitch which seems to be the best candidate to do this
because of its size. It also means also cross compiling and packaging
the dependencies.

Perazim


On Sat, 2012-11-03 at 10:13 -0400, David Sugar wrote:
> This looks to me to be some qt related strangeness in rebuilding
> switchview.  I had already been considering relocating switchview out of
> the sipwitch package itself and into it's own, or perhaps a new
> "coastal-tms" package (coastal telephony management services) that also
> would derive from coastal-qt.  I have been waiting to do this on
> completing the ucommon 6 abi, but I might look at doing this sooner now.
> 
> On 11/01/2012 04:54 AM, Perazim wrote:
> > Trying to build 1.3.3 and receive this error. The build dependancies are
> > installed.
> > 
> > 
> > ...
> > make[3]: Entering directory `/home/yossi/src/sipwitch-1.3.3/switchview'
> > g++ -DHAVE_CONFIG_H -I. -I..    -I../inc   -DOSIP_MT   -Wno-long-long
> > -fexceptions -DNEW_STDCPP -pthread -fno-check-new -finline
> > -fvisibility=hidden -DUCOMMON_VISIBILITY=1 -DQT_SHARED
> > -I/usr/include/QtGui -I/usr/include/QtCore   -g -O2 -MT mapped.o -MD -MP
> > -MF .deps/mapped.Tpo -c -o mapped.o mapped.cpp
> > mapped.cpp:26:8: error: ‘Ui’ does not name a type
> > mapped.cpp:34:17: error: variable or field ‘add’ declared void
> > mapped.cpp:34:17: error: ‘QTableWidget’ was not declared in this scope
> > mapped.cpp:34:31: error: ‘table’ was not declared in this scope
> > mapped.cpp:34:38: error: expected primary-expression before ‘const’
> > mapped.cpp:34:57: error: expected primary-expression before ‘int’
> > mapped.cpp:34:66: error: expected primary-expression before ‘int’
> > mapped.cpp:42:17: error: variable or field ‘add’ declared void
> > mapped.cpp:42:17: error: ‘QTableWidget’ was not declared in this scope
> > mapped.cpp:42:31: error: ‘table’ was not declared in this scope
> > mapped.cpp:42:38: error: expected primary-expression before ‘const’
> > mapped.cpp:42:56: error: expected primary-expression before ‘int’
> > mapped.cpp:42:65: error: expected primary-expression before ‘int’
> > mapped.cpp: In function ‘void remapStats()’:
> > mapped.cpp:103:5: error: ‘QTableWidget’ was not declared in this scope
> > mapped.cpp:103:19: error: ‘table’ was not declared in this scope
> > mapped.cpp:103:27: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In function ‘void remapCalls()’:
> > mapped.cpp:178:5: error: ‘QTableWidget’ was not declared in this scope
> > mapped.cpp:178:19: error: ‘table’ was not declared in this scope
> > mapped.cpp:178:27: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In function ‘void remapUsers()’:
> > mapped.cpp:231:5: error: ‘QTableWidget’ was not declared in this scope
> > mapped.cpp:231:19: error: ‘table’ was not declared in this scope
> > mapped.cpp:231:27: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In constructor ‘Mapped::Mapped()’:
> > mapped.cpp:330:5: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In member function ‘void Mapped::started(const char*)’:
> > mapped.cpp:422:5: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In member function ‘void Mapped::changeContact(char*)’:
> > mapped.cpp:428:5: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In member function ‘void Mapped::changePublish(char*)’:
> > mapped.cpp:449:5: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In member function ‘void Mapped::changeRealm(char*)’:
> > mapped.cpp:455:5: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In member function ‘void Mapped::changeState(char*, char*)’:
> > mapped.cpp:468:5: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In member function ‘void
> > Mapped::notifyActivity(sipwitch::events*)’:
> > mapped.cpp:478:78: error: ‘ui’ was not declared in this scope
> > mapped.cpp:496:5: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In member function ‘const char* Mapped::realm()’:
> > mapped.cpp:502:12: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In member function ‘const char* Mapped::state()’:
> > mapped.cpp:507:12: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In member function ‘void Mapped::selectedTab(int)’:
> > mapped.cpp:555:9: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In member function ‘void
> > Mapped::dropUpdate(sipwitch::events*)’:
> > mapped.cpp:601:5: error: ‘QTableWidget’ was not declared in this scope
> > mapped.cpp:601:19: error: ‘table’ was not declared in this scope
> > mapped.cpp:601:27: error: ‘ui’ was not declared in this scope
> > mapped.cpp: In member function ‘void Mapped::open()’:
> > mapped.cpp:677:9: error: ‘ui’ was not declared in this scope
> > mapped.cpp:682:9: error: ‘ui’ was not declared in this scope
> > mapped.cpp:686:14: error: ‘ui’ was not declared in this scope
> > make[3]: *** [mapped.o] Error 1
> > make[3]: Leaving directory `/home/yossi/src/sipwitch-1.3.3/switchview'
> > make[2]: *** [all] Error 2
> > make[2]: Leaving directory `/home/yossi/src/sipwitch-1.3.3/switchview'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory `/home/yossi/src/sipwitch-1.3.3'
> > make: *** [all] Error 2
> > address@hidden sipwitch-1.3.3]# 
> > 
> > 
> > Any help is appreciated.
> > 
> > Perazim
> > 
> > 
> > 
> >