[Sipwitch-devel] trouble building sipwitch

[Perazim]

David, 

I am still trying to port sipwitch to the openwrt router project.

Openwrt uses a crosscompiler to build for a soc. Packages are built and
either put into a monolithic firmware or can be downloaded and added
later one at a time.

Some of the deps are already available as openwrt packages: libosip2,
libpthread, librt, libstdcpp, libopenssl.

So I had to package sipwitch, ucommon and libeXosip2. I was able to do
this with ucommon and libeXosip without problems or at least no errors
returned. However I am receiving a configure error from sipwitch in that
it cannot find ucommon and stops.

Is there a way to specify the ucommon location? Is there anything else
that can cause this behavior?

Here is the output and Makefile for openwrt:




#
# Copyright (C) 2006-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License
v2.
# See /LICENSE for more information.
#

include $(TOPDIR)/rules.mk

PKG_NAME:=sipwitch
PKG_VERSION:=1.2.4
PKG_RELEASE:=1

PKG_BUILD_DIR:=$(BUILD_DIR)/sipwitch-$(PKG_VERSION)
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=http://ftp.gnu.org/gnu/sipwitch/
PKG_MD5SUM:=6119cecb062ba4d0af18b427b01c41e2
PKG_CAT:=zcat

PKG_FIXUP:=autoreconf
PKG_INSTALL:=1
PKG_BUILD_PARALLEL:=1

include $(INCLUDE_DIR)/package.mk

define Package/sipwitch
        SECTION:=net
        CATEGORY:=Network
        SUBMENU:=Telephony
        DEPENDS:=+libosip2 +libeXosip +ucommon
        TITLE:=Sipwitch
        URL:=http://www.gnu.org/software/sipwitch/
endef

define Package/sipwitch/description
        Sipwitch is a simple sip registrar and proxy server.
endef

define Build/Configure
        $(call Build/Configure/Default, \
                --disable-qt \
                --with-libosip-prefix="$(STAGING_DIR)/usr" \
                --with-libeXosip-prefix="$(STAGING_DIR)/usr" \
                --with-ucommon-prefix="$(STAGING_DIR)/usr" \
                --with-linux-headers=$(LINUX_DIR)\
        )
endef

define Package/sipwitch/install
        $(INSTALL_DIR) $(1)/usr/sbin
        $(INSTALL_BIN) $(PKG_BUILD_DIR)/sipwitch $(1)/usr/sbin/
endef

$(eval $(call BuildPackage,sipwitch))




address@hidden trunk]$ HOST_LIB_PATH_bfd=/lib: make
package/sipwitch/compile V=s
Collecting package info: done
make[1]: Entering directory `/home/yossi/openwrt/trunk'
make[2]: Entering directory
`/home/yossi/openwrt/trunk/package/toolchain'
if
[ -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean
 ]; then rm -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install
 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean;
 fi; echo "libc" >> 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install
if
[ -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean
 ]; then rm -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install
 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean;
 fi; echo "libgcc" >> 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install
WARNING: skipping libssp -- package not selected
if
[ -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean
 ]; then rm -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install
 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean;
 fi; echo "libstdcpp" >> 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install
if
[ -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean
 ]; then rm -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install
 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean;
 fi; echo "libpthread" >> 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install
WARNING: skipping libthread-db -- package not selected
if
[ -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean
 ]; then rm -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install
 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install.clean;
 fi; echo "librt" >> 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/toolchain.default.install
WARNING: skipping libgfortran -- package not selected
WARNING: skipping ldd -- package not selected
WARNING: skipping ldconfig -- package not selected
make[2]: Leaving directory `/home/yossi/openwrt/trunk/package/toolchain'
make[2]: Entering directory
`/home/yossi/openwrt/trunk/package/libs/ocf-crypto-headers'
make[2]: Leaving directory
`/home/yossi/openwrt/trunk/package/libs/ocf-crypto-headers'
make[2]: Entering directory
`/home/yossi/openwrt/trunk/package/libs/zlib'
if
[ -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/zlib.default.install.clean
 ]; then rm -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/zlib.default.install
 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/zlib.default.install.clean;
 fi; echo "zlib" >> 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/zlib.default.install
make[2]: Leaving directory `/home/yossi/openwrt/trunk/package/libs/zlib'
make[2]: Entering directory
`/home/yossi/openwrt/trunk/package/libs/openssl'
if
[ -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/openssl.default.install.clean
 ]; then rm -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/openssl.default.install
 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/openssl.default.install.clean;
 fi; echo "libopenssl" >> 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/openssl.default.install
if
[ -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/openssl.default.install.clean
 ]; then rm -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/openssl.default.install
 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/openssl.default.install.clean;
 fi; echo "openssl-util" >> 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/openssl.default.install
make[2]: Leaving directory
`/home/yossi/openwrt/trunk/package/libs/openssl'
make[2]: Entering directory `/home/yossi/openwrt/myfeed/ucommon'
if
[ -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/ucommon.default.install.clean
 ]; then rm -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/ucommon.default.install
 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/ucommon.default.install.clean;
 fi; echo "ucommon" >> 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/ucommon.default.install
make[2]: Leaving directory `/home/yossi/openwrt/myfeed/ucommon'
make[2]: Entering directory
`/home/yossi/openwrt/trunk/feeds/packages/libs/libosip2'
if
[ -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/libosip2.default.install.clean
 ]; then rm -f 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/libosip2.default.install
 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/libosip2.default.install.clean;
 fi; echo "libosip2" >> 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo/libosip2.default.install
make[2]: Leaving directory
`/home/yossi/openwrt/trunk/feeds/packages/libs/libosip2'
make[2]: Entering directory `/home/yossi/openwrt/myfeed/sipwitch'
. /home/yossi/openwrt/trunk/include/shell.sh; gzip
-dc /home/yossi/openwrt/trunk/dl/sipwitch-1.2.4.tar.gz | /bin/gtar
-C 
/home/yossi/openwrt/trunk/build_dir/target-mips_r2_uClibc-0.9.33.2/sipwitch-1.2.4/..
 -xf - 
touch 
/home/yossi/openwrt/trunk/build_dir/target-mips_r2_uClibc-0.9.33.2/sipwitch-1.2.4/.prepared_d64bce34c272ce8817084e7763a45fbd
(cd 
/home/yossi/openwrt/trunk/build_dir/target-mips_r2_uClibc-0.9.33.2/sipwitch-1.2.4;
 rm -f aclocal.m4; if [ -f ./configure.ac ] || [ -f ./configure.in ]; then [ -d 
./autom4te.cache ] && rm -rf autom4te.cache; [ -e ./config.rpath ] || ln -s 
/home/yossi/openwrt/trunk/scripts/config.rpath ./config.rpath; touch NEWS 
AUTHORS COPYING ABOUT-NLS ChangeLog; 
AUTOM4TE=/home/yossi/openwrt/trunk/staging_dir/host/bin/autom4te 
AUTOCONF=/home/yossi/openwrt/trunk/staging_dir/host/bin/autoconf 
AUTOMAKE=/home/yossi/openwrt/trunk/staging_dir/host/bin/automake 
ACLOCAL=/home/yossi/openwrt/trunk/staging_dir/host/bin/aclocal 
AUTOHEADER=/home/yossi/openwrt/trunk/staging_dir/host/bin/autoheader 
LIBTOOLIZE=/home/yossi/openwrt/trunk/staging_dir/host/bin/libtoolize 
LIBTOOL=/home/yossi/openwrt/trunk/staging_dir/host/bin/libtool 
M4=/home/yossi/openwrt/trunk/staging_dir/host/bin/m4 AUTOPOINT=true 
/home/yossi/openwrt/trunk/staging_dir/host/bin/autoreconf -v -f -i -s -B 
/home/yossi/openwrt/trunk/staging_dir/host/share/aclocal -I 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/host/share/aclocal
 -I 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/share/aclocal
 -I m4 -I . . || true; fi; );
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf:
running: /home/yossi/openwrt/trunk/staging_dir/host/bin/aclocal
-I 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/host/share/aclocal
 -I 
/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/share/aclocal
 -I m4 -I . --force 
autoreconf: configure.ac: tracing
autoreconf:
running: /home/yossi/openwrt/trunk/staging_dir/host/bin/libtoolize
--force
OpenWrt-libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR,
`autoconf'.
OpenWrt-libtoolize: linking file `autoconf/ltmain.sh'
OpenWrt-libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to
configure.ac and
OpenWrt-libtoolize: rerunning libtoolize, to keep the correct libtool
macros in-tree.
OpenWrt-libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in
Makefile.am.
autoreconf:
running: /home/yossi/openwrt/trunk/staging_dir/host/bin/autoconf
--include=/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/host/share/aclocal
 
--include=/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/share/aclocal
 --include=m4 --include=. 
--prepend-include=/home/yossi/openwrt/trunk/staging_dir/host/share/aclocal 
--force
autoreconf:
running: /home/yossi/openwrt/trunk/staging_dir/host/bin/autoheader
--include=/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/host/share/aclocal
 
--include=/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/share/aclocal
 --include=m4 --include=. 
--prepend-include=/home/yossi/openwrt/trunk/staging_dir/host/share/aclocal 
--force
autoreconf:
running: /home/yossi/openwrt/trunk/staging_dir/host/bin/automake
--add-missing --force-missing
autoreconf: Leaving directory `.'
(cd 
/home/yossi/openwrt/trunk/build_dir/target-mips_r2_uClibc-0.9.33.2/sipwitch-1.2.4/./;
 if [ -x ./configure ]; then /bin/find 
/home/yossi/openwrt/trunk/build_dir/target-mips_r2_uClibc-0.9.33.2/sipwitch-1.2.4/
 -name config.guess | xargs -r chmod u+w; /bin/find 
/home/yossi/openwrt/trunk/build_dir/target-mips_r2_uClibc-0.9.33.2/sipwitch-1.2.4/
 -name config.guess | xargs -r -n1 cp 
/home/yossi/openwrt/trunk/scripts/config.guess; /bin/find 
/home/yossi/openwrt/trunk/build_dir/target-mips_r2_uClibc-0.9.33.2/sipwitch-1.2.4/
 -name config.sub | xargs -r chmod u+w; /bin/find 
/home/yossi/openwrt/trunk/build_dir/target-mips_r2_uClibc-0.9.33.2/sipwitch-1.2.4/
 -name config.sub | xargs -r -n1 cp 
/home/yossi/openwrt/trunk/scripts/config.sub; AR=mips-openwrt-linux-uclibc-ar 
AS="mips-openwrt-linux-uclibc-gcc -c -Os -pipe -mips32r2 -mtune=mips32r2 
-fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable 
-msoft-float" LD=mips-openwrt-linux-uclibc-ld NM=mips-openwrt-linux-uclibc-nm 
CC="mips-openwrt-linux-uclibc-gcc" GCC="mips-openwrt-linux-uclibc-gcc" 
CXX="mips-openwrt-linux-uclibc-g++" RANLIB=mips-openwrt-linux-uclibc-ranlib 
STRIP=mips-openwrt-linux-uclibc-strip OBJCOPY=mips-openwrt-linux-uclibc-objcopy 
OBJDUMP=mips-openwrt-linux-uclibc-objdump SIZE=mips-openwrt-linux-uclibc-size 
CFLAGS="-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -fhonour-copts 
-Wno-error=unused-but-set-variable -msoft-float " CXXFLAGS="-Os -pipe -mips32r2 
-mtune=mips32r2 -fno-caller-saves -fhonour-copts 
-Wno-error=unused-but-set-variable -msoft-float " 
CPPFLAGS="-I/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/include
 -I/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/include 
-I/home/yossi/openwrt/trunk/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/usr/include
 
-I/home/yossi/openwrt/trunk/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/include
 " 
LDFLAGS="-L/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib
 -L/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/lib 
-L/home/yossi/openwrt/trunk/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/usr/lib
 
-L/home/yossi/openwrt/trunk/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/lib
 "   ./configure --target=mips-openwrt-linux --host=mips-openwrt-linux 
--build=i686-redhat-linux --program-prefix="" --program-suffix="" --prefix=/usr 
--exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/lib 
--sysconfdir=/etc --datadir=/usr/share --localstatedir=/var --mandir=/usr/man 
--infodir=/usr/info --disable-nls    --disable-qt 
--with-libosip-prefix="/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr"
 
--with-libeXosip-prefix="/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr"
 
--with-ucommon-prefix="/home/yossi/openwrt/trunk/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr"
 --with-linux-headers= ; fi; )
configure: WARNING: unrecognized options: --disable-nls,
--with-libosip-prefix, --with-libeXosip-prefix, --with-ucommon-prefix,
--with-linux-headers
configure: loading site
script /home/yossi/openwrt/trunk/include/site/mips-openwrt-linux-uclibc
checking build system type... i686-redhat-linux-gnu
checking host system type... mips-openwrt-linux-gnu
checking target system type... mips-openwrt-linux-gnu
checking for mips-openwrt-linux-gcc... mips-openwrt-linux-uclibc-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether mips-openwrt-linux-uclibc-gcc accepts -g... yes
checking for mips-openwrt-linux-uclibc-gcc option to accept ISO C89...
none needed
checking how to run the C preprocessor... mips-openwrt-linux-uclibc-gcc
-E
checking for mips-openwrt-linux-gcc... (cached)
mips-openwrt-linux-uclibc-gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether mips-openwrt-linux-uclibc-gcc accepts -g... (cached)
yes
checking for mips-openwrt-linux-uclibc-gcc option to accept ISO C89...
(cached) none needed
checking whether we are using the GNU C++ compiler... yes
checking whether mips-openwrt-linux-uclibc-g++ accepts -g... yes
checking how to run the C++ preprocessor... mips-openwrt-linux-uclibc-g
++ -E
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether mips-openwrt-linux-uclibc-g++ accepts -g... (cached)
yes
checking whether ln -s works... yes
checking how to print strings... printf
checking for a sed that does not truncate
output... /home/yossi/openwrt/trunk/staging_dir/host/bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by mips-openwrt-linux-uclibc-gcc...
mips-openwrt-linux-uclibc-ld
checking if the linker (mips-openwrt-linux-uclibc-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)...
mips-openwrt-linux-uclibc-nm
checking the name lister (mips-openwrt-linux-uclibc-nm) interface... BSD
nm
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert i686-redhat-linux-gnu file names to
mips-openwrt-linux-gnu format... func_convert_file_noop
checking how to convert i686-redhat-linux-gnu file names to toolchain
format... func_convert_file_noop
checking for mips-openwrt-linux-uclibc-ld option to reload object
files... -r
checking for mips-openwrt-linux-objdump...
mips-openwrt-linux-uclibc-objdump
checking how to recognize dependent libraries... pass_all
checking for mips-openwrt-linux-dlltool... dlltool
checking how to associate runtime and link libraries... printf %s\n
checking for mips-openwrt-linux-ar... mips-openwrt-linux-uclibc-ar
checking for archiver @FILE support... @
checking for mips-openwrt-linux-strip... mips-openwrt-linux-uclibc-strip
checking for mips-openwrt-linux-ranlib...
mips-openwrt-linux-uclibc-ranlib
checking for gawk... gawk
checking command to parse mips-openwrt-linux-uclibc-nm output from
mips-openwrt-linux-uclibc-gcc object... ok
checking for sysroot... no
checking for mips-openwrt-linux-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if mips-openwrt-linux-uclibc-gcc supports -fno-rtti
-fno-exceptions... no
checking for mips-openwrt-linux-uclibc-gcc option to produce PIC...
-fPIC -DPIC
checking if mips-openwrt-linux-uclibc-gcc PIC flag -fPIC -DPIC works...
yes
checking if mips-openwrt-linux-uclibc-gcc static flag -static works...
yes
checking if mips-openwrt-linux-uclibc-gcc supports -c -o file.o... yes
checking if mips-openwrt-linux-uclibc-gcc supports -c -o file.o...
(cached) yes
checking whether the mips-openwrt-linux-uclibc-gcc linker
(mips-openwrt-linux-uclibc-ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... cross
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... mips-openwrt-linux-uclibc-g
++ -E
checking for ld used by mips-openwrt-linux-uclibc-g++...
mips-openwrt-linux-uclibc-ld
checking if the linker (mips-openwrt-linux-uclibc-ld) is GNU ld... yes
checking whether the mips-openwrt-linux-uclibc-g++ linker
(mips-openwrt-linux-uclibc-ld) supports shared libraries... yes
checking for mips-openwrt-linux-uclibc-g++ option to produce PIC...
-fPIC -DPIC
checking if mips-openwrt-linux-uclibc-g++ PIC flag -fPIC -DPIC works...
yes
checking if mips-openwrt-linux-uclibc-g++ static flag -static works...
yes
checking if mips-openwrt-linux-uclibc-g++ supports -c -o file.o... yes
checking if mips-openwrt-linux-uclibc-g++ supports -c -o file.o...
(cached) yes
checking whether the mips-openwrt-linux-uclibc-g++ linker
(mips-openwrt-linux-uclibc-ld) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for mips-openwrt-linux-strip... (cached)
mips-openwrt-linux-uclibc-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking dependency style of mips-openwrt-linux-uclibc-gcc... gcc3
checking dependency style of mips-openwrt-linux-uclibc-g++... gcc3
checking for C/C++ restrict keyword... __restrict
checking for working volatile... yes
checking for inline... inline
checking for
pkg-config... /home/yossi/openwrt/trunk/staging_dir/host/bin/pkg-config
checking openssl/openssl.h usability... no
checking openssl/openssl.h presence... no
checking for openssl/openssl.h... no
checking for ucommon-config... none
configure: error: "required ucommon library missing"
make[2]: ***
[/home/yossi/openwrt/trunk/build_dir/target-mips_r2_uClibc-0.9.33.2/sipwitch-1.2.4/.configured_]
 Error 1
make[2]: Leaving directory `/home/yossi/openwrt/myfeed/sipwitch'
make[1]: *** [package/feeds/custom/sipwitch/compile] Error 2
make[1]: Leaving directory `/home/yossi/openwrt/trunk'
make: *** [package/sipwitch/compile] Error 2
address@hidden trunk]$ 




Thanks,

Perazim