[Slackware.it] Connessione ADSL

[Claudio]

Avevo seguito tempo fa una post su questo argomento. Ora vi mando i miei
output, nella speranza che qualcuno capisca come mai, netconfig con DHC
non ha effetto!
Grazie a tutti. Un saluto.
PS: Devo inserire qualcos'altro in etc/rc.d/inet1conf ?

address@hidden:/home/claudio# netconfig
....
address@hidden:/home/claudio# /etc/rc.d/rc.inet1 restart
****  /sbin/dhcpcd: not running
dhcpcd: MAC address = 00:02:3f:10:d9:3f
address@hidden:/home/claudio#

dopo aver appena settato DHCP con netconfig...

address@hidden:/home/claudio# ifconfig
lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         inet6 addr: ::1/128 Scope:Host
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:86 errors:0 dropped:0 overruns:0 frame:0
         TX packets:86 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:6436 (6.2 Kb)  TX bytes:6436 (6.2 Kb)

....cioè, a parer mio netconfig non ha modificato nulla...
Quindi...
address@hidden:/home/claudio# pppoe-setup
Welcome to the Roaring Penguin PPPoE client setup.  First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...

Looks good!  Now, please enter some information:
....
** Summary of what you entered **

Ethernet Interface: /dev/eth1
User name:          XXXXX
Activate-on-demand: No
DNS addresses:      Supplied by ISP's server
Firewalling:        MASQUERADE

> > > Accept these settings and adjust configuration files (y/n)? y
....
Congratulations, it should be all set up!

Type 'pppoe-start' to bring up your PPPoE link and 'pppoe-stop' to bring
it down.  Type 'pppoe-status' to see the link status.


address@hidden:/home/claudio# pppoe-start
................TIMED OUT
/usr/sbin/pppoe-start: line 191:  6506 Terminated              $CONNECT
"$@" >/dev/null 2>&1
address@hidden:/home/claudio#

--
Claudio
"Come sul sentiero di guerra"