Re: [STUMP] Crash Report

[iii_iii]

This is as it was when it crashed (again). Actually it left the system 
a bit messed up, so had to restart X.

xrandr --verbose
Screen 0: minimum 8 x 8, current 1024 x 768, maximum 8192 x 8192
VGA-0 disconnected primary (normal left inverted right x axis y axis)
Identifier: 0x249
Timestamp:  3222902
Subpixel:   unknown
Clones:
CRTCs:      0 1
Transform:  1.000000 0.000000 0.000000
           0.000000 1.000000 0.000000
           0.000000 0.000000 1.000000
          filter:
BorderDimensions: 4
supported: 4
Border: 0 0 0 0
range: (0, 65535)
SignalFormat: VGA
supported: VGA
ConnectorType: VGA
ConnectorNumber: 1
_ConnectorLocation: 1
TV-0 connected 1024x768+0+0 (0x24b) normal (normal left inverted right 
x axis y axis) 0mm x 0mm
Identifier: 0x24a
Timestamp:  3222902
Subpixel:   unknown
Gamma:      1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC:       1
CRTCs:      0 1
Transform:  1.000000 0.000000 0.000000
           0.000000 1.000000 0.000000
           0.000000 0.000000 1.000000
          filter:
BorderDimensions: 4
supported: 4
Border: 0 0 0 0
range: (0, 65535)
SignalFormat: unknown
supported: unknown
ConnectorType: TV
ConnectorNumber: 2
_ConnectorLocation: 3
 1024x768 (0x24b)   64.1MHz -HSync +VSync *current +preferred
        h: width  1024 start 1080 end 1184 total 1344 skew    0 clock   
47.7KHz
        v: height  768 start  769 end  772 total  795           clock   
60.0Hz
 800x600 (0x24c)   38.2MHz -HSync +VSync
        h: width   800 start  832 end  912 total 1024 skew    0 clock   
37.3KHz
        v: height  600 start  601 end  604 total  622           clock   
60.0Hz
 720x480 (0x24d)   26.7MHz -HSync +VSync
        h: width   720 start  736 end  808 total  896 skew    0 clock   
29.8KHz
        v: height  480 start  481 end  484 total  497           clock   
60.0Hz
 640x480 (0x24e)   23.9MHz -HSync +VSync
        h: width   640 start  656 end  720 total  800 skew    0 clock   
29.8KHz
        v: height  480 start  481 end  484 total  497           clock   
60.0Hz
 640x400 (0x24f)   19.5MHz -HSync +VSync
        h: width   640 start  648 end  712 total  784 skew    0 clock   
24.9KHz
        v: height  400 start  401 end  404 total  415           clock   
60.0Hz
 512x384 (0x250)   14.9MHz -HSync +VSync
        h: width   512 start  520 end  568 total  624 skew    0 clock   
23.9KHz
        v: height  384 start  385 end  388 total  398           clock   
60.0Hz
LVDS-0 connected 1024x768+0+0 (0x252) normal (normal left inverted 
right x axis y axis) 367mm x 230mm
Identifier: 0x251
Timestamp:  3222902
Subpixel:   unknown
Gamma:      1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC:       0
CRTCs:      0 1
Transform:  1.000000 0.000000 0.000000
           0.000000 1.000000 0.000000
           0.000000 0.000000 1.000000
          filter:
EDID:
00ffffffffffff004ca3553100000000
00110103802517780a87f594574f8c27
27505400000001010101010101010101
0101010101014f40803471b020403020
36006fe6100000190000000f00000000
000000000046d2026400000000fe0047
523433330431373055310a20000000fe
00202d383e5a80aeff02010a20200093
BorderDimensions: 4
supported: 4
Border: 160 0 160 0
range: (0, 65535)
SignalFormat: LVDS
supported: LVDS
ConnectorType: Panel
ConnectorNumber: 0
_ConnectorLocation: 0
 1920x1200 (0x252)  164.6MHz -HSync -VSync *current +preferred
        h: width  1920 start 1968 end 2000 total 2228 skew    0 clock   
73.9KHz
        v: height 1200 start 1203 end 1209 total 1232           clock   
60.0Hz


address@hidden


-----Original Message-----
From: David Bjergaard <address@hidden>
To: iii_iii <address@hidden>
Cc: Stumpwm-devel <address@hidden>
Sent: Sat, Apr 26, 2014 7:21 pm
Subject: Re: [STUMP] Crash Report


Hi can you also send the xrandr output when the external monitor is
connected?

   Dave

address@hidden writes:

> I am using Opensuse 12.3
>
> The kernel is 3.7.10-1.28-desktop #1 SMP PREEMPT Mon Feb 3 14:11:15 
UTC
> 2014 (c9a2c6c) x86_64 x86_64 x86_64 GNU/Linux
>
> Name        : sbcl
> Version     : 1.1.2
> Release     : 2.1.1
> Architecture: x86_64
> Install Date: Thu 20 Mar 2014 18:45:37 GMT
> Group       : Development/Languages/Other
> Size        : 68065565
> License     : SUSE-Public-Domain and BSD-3-Clause
> Signature   : RSA/SHA256, Mon 28 Jan 2013 07:18:41 GMT, Key ID
> b88b2fd43dbdc284
> Source RPM  : sbcl-1.1.2-2.1.1.src.rpm
> Build Date  : Mon 28 Jan 2013 07:16:56 GMT
> Build Host  : build09
> Relocations : (not relocatable)
> Packager    : http://bugs.opensuse.org
> Vendor      : openSUSE
> URL         : http://www.sbcl.org/
> Summary     : Steel Bank Common Lisp
>
> To build, I followed the instructions in README.md. It was
> straight-forward as far as I remember. I was not able to build with
> clisp though.
>
> As I said I think it is quite likely that the nvidia driver is the
> culprit.
>
> Name        : x11-video-nvidiaG03
> Version     : 331.49
> Release     : 29.1
> Architecture: x86_64
> Install Date: Sat 01 Mar 2014 16:30:24 GMT
> Group       : System/Libraries
> Size        : 89789946
> License     : PERMISSIVE-OSI-COMPLIANT
> Signature   : DSA/SHA1, Mon 24 Feb 2014 14:07:43 GMT, Key ID
> f5113243c66b6eae
> Source RPM  : x11-video-nvidiaG03-331.49-29.1.nosrc.rpm
> Build Date  : Tue 25 Feb 2014 12:48:04 GMT
> Build Host  : nagios-abuild
> Relocations : (not relocatable)
> Vendor      : obs://build.suse.de/home:sndirsch:drivers
> Summary     : NVIDIA graphics driver for GeForce 8xxx and newer GPUs
>
> The system is a laptop Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz
>
>
> address@hidden
>
>
> -----Original Message-----
> From: David Bjergaard <address@hidden>
> To: Joseph Mingrone <address@hidden>
> Cc: stumpwm-devel <address@hidden>
> Sent: Sat, Apr 26, 2014 6:05 pm
> Subject: Re: [STUMP] Crash Report
>
>
> I agree. Can you send details about how you built stumpwm? 
Specifically
> which
> lisp version as well as what OS you are running?
>
>    Dave
>
> > On Apr 26, 2014, at 12:31 PM, Joseph Mingrone <address@hidden> wrote:
> >
> > address@hidden writes:
> >
> > > Hi, I have received a crash. I haven't pasted the whole thing as I
> am not
> sure
> > > if it is worth it. I am using an nvidia driver, and I was trying to
> clone the
> > > display onto tv-out. There are warnings about the nvidia driver when
> I start
> the
> > > system but it works ok most of the time. I usually extend the
> desktop rather
> > > than clone.
_________________________________________________________________________

> > > ________
> > >
> > > The value NIL is not of type STUMPWM::FRAME.
> > > 0: (SB-DEBUG::MAP-BACKTRACE
> > >   #<CLOSURE (LAMBDA # :IN SB-DEBUG:BACKTRACE) {10082AF3EB}>
> > >   :START
> > >   0
> > >   :COUNT
> > >   100)
> > > 1: (SB-DEBUG:BACKTRACE 100 #<SB-IMPL::STRING-OUTPUT-STREAM
> {10082AF313}>)
> > > 2: (STUMPWM::BACKTRACE-STRING)
> > > 3: (STUMPWM::PERFORM-TOP-LEVEL-ERROR-ACTION
> > >   #<TYPE-ERROR expected-type: STUMPWM::FRAME datum: NIL>)
> > > 4: (SIGNAL #<TYPE-ERROR expected-type: STUMPWM::FRAME datum: NIL>)
> > > 5: (ERROR TYPE-ERROR :DATUM NIL :EXPECTED-TYPE STUMPWM::FRAME)
> > > 6: (SB-KERNEL::OBJECT-NOT-TYPE-ERROR-HANDLER
> > >   #<unavailable argument>
> > >   #.(SB-SYS:INT-SAP #X7FFFF6E1ED80)
> > >   #<SB-ALIEN-INTERNALS:ALIEN-VALUE :SAP #X7FFFF6E1E900 :TYPE (*
> (SB-ALIEN:STRUCT
> > >
> SB-VM::OS-CONTEXT-T-STRUCT))>
> > >   (149 21))
> ______________________________________________________________________
> > > address@hidden
> >
> > This appears related to https://github.com/stumpwm/stumpwm/issues/71.
> >
> >
> > _______________________________________________
> > Stumpwm-devel mailing list
> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/stumpwm-devel
>
> _______________________________________________
> Stumpwm-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/stumpwm-devel
>
>
>
>
> _______________________________________________
> Stumpwm-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/stumpwm-devel