Re: [Swarm-Support] binary numbers

[Marcello]

Thanks for the replies. Which kind of type should bitstring be in order
to work with standard bit operators?
marcello
On Tue, 2003-07-08 at 12:45, Russell Standish wrote:
> If the bitstrings fit into the system wordsize (32 bits on average
> PCs), then you can use the standard bit manipulation operators of C:
> 
> x|=1<<i    - sets the ith bit of x
> (x&1<<i)!=0     - returns the ith bit of 0
> 
> If you have more bits than the wordsize, then you'll need to concoct a
> BitSet object to do your work. C++ has a number of these - I'm not so
> familiar with what's available for Obj C.
> 
>                                       Cheers
> 
> Marcello wrote:
> > 
> > Sorry if this comes a bit off the topic:
> > Does anybody have a nice and clean way to handle binary numbers. I would
> > like to store some information about the agent as a binary number
> > (0100101), and have a call that returns exactly the digit I'd like.
> > Thus, if the agent has myBin=01001, the call [agent gimmeBin: 1] returns
> > 0, [agent gimmeBin: 2] returns 1, [agent gimmeBin: 3] returns 0, and so
> > on. Of course, I could write gimmeBin as a sequence of if-then, but it
> > does not sound very neat.
> > Any hint?
> > thanks
> > marcello
> > On Fri, 2003-07-04 at 15:03, Paul Johnson wrote:
> > > au contraire!
> > > 
> > > I have put both swarm-2.1.143 and 2.1.145 up there some time ago.
> > > 
> > > Although the swarm link to the ftp server won't let me in now, I can get 
> > > there from
> > > 
> > > ftp://ftp.santafe.edu/pub/swarm/src/testing.
> > > 
> > > Agustin Ramos Fonseca wrote:
> > > > Thank you for your advise.
> > > > 
> > > > I'd like to know where I can get the swarm 2.1.143.20030512 sources,
> > > > I looked for them at
> > > > ftp://ftp.swarm.org/pub/swarm/src/testing/
> > > > but they aren't there.
> > > > 
> > > > I'll try to upgrade my RH to 7.3 but I think my old PC won't support it
> > > > (mainly because disk space, all rpm updates are disk consuming)
> > > > 
> > > > I'm interested in the sources because I'm interested in modelling and
> > > > in the inner workings of this tool. So I'll try to build the sources.
> > > > 
> > > > Thanks again
> > > > 
> > > > Agustín T.Ramos Fonseca
> > > 
> > > 
> > > -- 
> > > Paul E. Johnson                       email: address@hidden
> > > Dept. of Political Science            http://lark.cc.ku.edu/~pauljohn
> > > University of Kansas                  Office: (785) 864-9086
> > > Lawrence, Kansas 66045                FAX: (785) 864-5700
> > > 
> > > _______________________________________________
> > > Support mailing list
> > > address@hidden
> > > http://www.swarm.org/mailman/listinfo/support
> > -- 
> > Marcello Gallucci (Ph.D)
> > Department of Social Psychology
> > Free University
> > Van der Boechorststraat 1
> > 1081 BT Amsterdam (NL)
> > Tel. +31(0)20 4448846
> > Fax  +31 (0)20 4448921
> > 
> > _______________________________________________
> > Support mailing list
> > address@hidden
> > http://www.swarm.org/mailman/listinfo/support
> > 
> 
> 
> 
> ----------------------------------------------------------------------------
> A/Prof Russell Standish                Director
> High Performance Computing Support Unit, Phone 9385 6967, 8308 3119 (mobile)
> UNSW SYDNEY 2052                       Fax   9385 6965, 0425 253119 (")
> Australia                              address@hidden             
> Room 2075, Red Centre                    http://parallel.hpc.unsw.edu.au/rks
>             International prefix  +612, Interstate prefix 02
> ----------------------------------------------------------------------------
> _______________________________________________
> Support mailing list
> address@hidden
> http://www.swarm.org/mailman/listinfo/support
-- 
Marcello Gallucci (Ph.D)
Department of Social Psychology
Free University
Van der Boechorststraat 1
1081 BT Amsterdam (NL)
Tel. +31(0)20 4448846
Fax  +31 (0)20 4448921