[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[6987] hyphenate "cross-reference"
|
From: |
Gavin D. Smith |
|
Subject: |
[6987] hyphenate "cross-reference" |
|
Date: |
Sat, 06 Feb 2016 08:59:22 +0000 |
Revision: 6987
http://svn.sv.gnu.org/viewvc/?view=rev&root=texinfo&revision=6987
Author: gavin
Date: 2016-02-06 08:59:21 +0000 (Sat, 06 Feb 2016)
Log Message:
-----------
hyphenate "cross-reference"
Modified Paths:
--------------
trunk/ChangeLog
trunk/doc/texinfo.texi
Modified: trunk/ChangeLog
===================================================================
--- trunk/ChangeLog 2016-02-06 08:36:20 UTC (rev 6986)
+++ trunk/ChangeLog 2016-02-06 08:59:21 UTC (rev 6987)
@@ -1,5 +1,10 @@
2016-02-06 Gavin Smith <address@hidden>
+ * doc/texinfo.texi: Change "cross reference" to "cross-reference"
+ throughout.
+
+2016-02-06 Gavin Smith <address@hidden>
+
* NEWS: Mention that behaviour is unchanged for comma or full
stop following closing brace of @xref command. Text from Karl Berry.
* NEWS: Change word 'makeinfo' to 'texi2any'.
Modified: trunk/doc/texinfo.texi
===================================================================
--- trunk/doc/texinfo.texi 2016-02-06 08:36:20 UTC (rev 6986)
+++ trunk/doc/texinfo.texi 2016-02-06 08:59:21 UTC (rev 6987)
@@ -138,7 +138,7 @@
* Beginning and Ending a File:: Beginning and end of a Texinfo file.
* Nodes:: Writing nodes, the basic unit of Texinfo.
* Chapter Structuring:: Creating chapters, sections, appendices, etc.
-* Cross References:: Writing cross references.
+* Cross References:: Writing cross-references.
* Marking Text:: Marking words and phrases as code,
keyboard input, meta-syntactic
variables, and the like.
@@ -279,15 +279,15 @@
* @code{@@part}:: Collections of chapters.
* Raise/lower sections:: How to change commands' hierarchical level.
-Cross References
+Cross-references
-* References:: What cross references are for.
+* References:: What cross-references are for.
* Cross Reference Commands:: A summary of the different commands.
-* Cross Reference Parts:: A cross reference has several parts.
+* Cross Reference Parts:: A cross-reference has several parts.
* @code{@@xref}:: Begin a reference with `See' @dots{}
* Referring to a Manual as a Whole:: Refer to an entire manual.
* @code{@@ref}:: A reference for the last part of a
sentence.
-* @code{@@pxref}:: How to write a parenthetical cross
reference.
+* @code{@@pxref}:: How to write a parenthetical
cross-reference.
* @code{@@anchor}:: Defining arbitrary cross-reference
targets
* @code{@@inforef}:: How to refer to an Info-only file.
* @code{@@url}:: How to refer to a uniform resource
locator.
@@ -628,9 +628,9 @@
* HTML Translation:: Details of the HTML output.
* HTML Splitting:: How HTML output is split.
* HTML CSS:: Influencing HTML output with Cascading Style Sheets.
-* HTML Xref:: Cross references in HTML output.
+* HTML Xref:: Cross-references in HTML output.
-HTML Cross References
+HTML Cross-references
* Link Basics: HTML Xref Link Basics.
* Node Expansion: HTML Xref Node Name Expansion.
@@ -1050,7 +1050,7 @@
A Texinfo-based book is similar to any other typeset, printed work: it
can have a title page, copyright page, table of contents, and preface,
as well as chapters, numbered or unnumbered sections and subsections,
-page headers, cross references, footnotes, and indices.
+page headers, cross-references, footnotes, and indices.
@TeX{} is a general purpose typesetting program. Texinfo provides a
file @file{texinfo.tex} that contains information (definitions or
@@ -3228,7 +3228,7 @@
being consistent.
@end itemize
-Because node names are used in cross references, it is not desirable
+Because node names are used in cross-references, it is not desirable
to casually change them once published. Such name changes invalidate
references from other manuals, from mail archives, and so on.
@xref{HTML Xref Link Preservation}.
@@ -3352,13 +3352,13 @@
Node names can contain @@-commands. The output is generally the
natural result of the command; for example, using @code{@@address@hidden@}} in
a
node name results in the @TeX{} logo being output, as it would be in
-normal text. Cross references should use @code{@@address@hidden@}} just as the
+normal text. Cross-references should use @code{@@address@hidden@}} just as the
node name does.
For Info and HTML output, especially, it is necessary to expand
commands to some sequence of plain characters; for instance,
@code{@@address@hidden@}} expands to the three letters @samp{TeX} in the Info
-node name. However, cross references to the node should not take the
+node name. However, cross-references to the node should not take the
``shortcut'' of using @samp{TeX}; stick to the actual node name,
commands and all.
@@ -3391,7 +3391,7 @@
removed some day.)
@command{makeinfo} warns about such problematic usage in node names,
-menu items, and cross references. If you don't want to see the
+menu items, and cross-references. If you don't want to see the
warnings, you can set the customization variable
@code{INFO_SPECIAL_CHARS_WARNING} to @samp{0} (@pxref{Other
Customization Variables}).
@@ -3638,7 +3638,7 @@
from section to section (sometimes, as shown, the `Previous' pointer
points up); an `Up' pointer usually leads to a node at the level above
(closer to the `Top' node); and a `Menu' leads to nodes at a level
-below (closer to `leaves'). (A cross reference can point to a node at
+below (closer to `leaves'). (A cross-reference can point to a node at
any level; see @ref{Cross References}.)
A @code{@@node} command and a chapter structuring command are
@@ -3793,7 +3793,7 @@
creation feature (@address@hidden Pointer Creation}) and GNU
Emacs Texinfo mode updating commands work only to create menus of
subordinate nodes in a hierarchically structured document. It is much
-better to use cross references to refer to arbitrary nodes.
+better to use cross-references to refer to arbitrary nodes.
@cindex Menus, automatically generating
@findex validatemenus
@@ -3964,7 +3964,7 @@
@command{makeinfo} warns when the text of a menu item (and node names
-and cross references) contains a problematic construct that will
+and cross-references) contains a problematic construct that will
interfere with its parsing in Info. If you don't want to see the
warnings, you can set the customization variable
@code{INFO_SPECIAL_CHARS_WARNING} to @samp{0} (@pxref{Other
@@ -4635,22 +4635,22 @@
@node Cross References
address@hidden Cross References
address@hidden Making cross references
address@hidden Cross references
address@hidden Cross-references
address@hidden Making cross-references
address@hidden Cross-references
@cindex References
@dfn{Cross-references} are used to refer the reader to other parts of the
same or different Texinfo files.
@menu
-* References:: What cross references are for.
+* References:: What cross-references are for.
* Cross Reference Commands:: A summary of the different commands.
-* Cross Reference Parts:: A cross reference has several parts.
+* Cross Reference Parts:: A cross-reference has several parts.
* @code{@@xref}:: Begin a reference with `See' @dots{}
* Referring to a Manual as a Whole:: Refer to an entire manual.
* @code{@@ref}:: A reference for the last part of a
sentence.
-* @code{@@pxref}:: How to write a parenthetical cross
reference.
+* @code{@@pxref}:: How to write a parenthetical
cross-reference.
* @code{@@anchor}:: Defining arbitrary cross-reference
targets
* @code{@@inforef}:: How to refer to an Info-only file.
* @code{@@url}:: How to refer to a uniform resource
locator.
@@ -4667,7 +4667,7 @@
it.
However, in any document, some information will be too detailed for
-the current context, or incidental to it; use cross references to
+the current context, or incidental to it; use cross-references to
provide access to such information. Also, an online help system or a
reference manual is not like a novel; few read such documents in
sequence from beginning to end. Instead, people look up what they
@@ -4693,15 +4693,15 @@
@need 800
@node Cross Reference Commands
address@hidden Different Cross Reference Commands
address@hidden Different cross reference commands
address@hidden Different Cross-reference Commands
address@hidden Different cross-reference commands
There are three different cross-reference commands:
@table @code
@item @@xref
Used to start a sentence in the printed manual and in HTML with
address@hidden @dots{}'} or an Info cross reference saying @samp{*Note
address@hidden @dots{}'} or an Info cross-reference saying @samp{*Note
@var{name}: @var{node}.}.
@item @@ref
@@ -4725,9 +4725,9 @@
@node Cross Reference Parts
address@hidden Parts of a Cross Reference
address@hidden Cross reference parts
address@hidden Parts of a cross reference
address@hidden Parts of a Cross-reference
address@hidden Cross-reference parts
address@hidden Parts of a cross-reference
@anchor{Reference Syntax} @c merged node
A cross-reference command requires only one argument, which is
@@ -4752,7 +4752,7 @@
@end quotation
A cross-reference command may contain up to four additional arguments.
-By using these arguments, you can provide a cross reference name,
+By using these arguments, you can provide a cross-reference name,
a topic description or section title for the printed output, the name
of a different manual file, and the name of a different printed manual.
To refer to another manual as a whole, the manual file and/or the name
@@ -4760,7 +4760,7 @@
to a Manual as a Whole}).
@need 700
-Here is an example of a full five-part cross reference:
+Here is an example of a full five-part cross-reference:
@example
@group
@@ -4787,18 +4787,18 @@
@noindent
in a printed book.
-The five possible arguments for a cross reference are:
+The five possible arguments for a cross-reference are:
@enumerate
@item
The node or anchor name (required, except for reference to whole
-manuals). This is the location to which the cross reference takes
+manuals). This is the location to which the cross-reference takes
you. In a printed document, the location of the node provides the
page reference only for references within the same document.
Use @code{@@node} to define the node (@pxref{Writing a Node}), or
@code{@@anchor} (@address@hidden@@anchor}}).
-Write a node name in a cross reference in exactly the same way as in
+Write a node name in a cross-reference in exactly the same way as in
the @code{@@node} line, including the same capitalization; otherwise, the
formatters may not find the reference.
@@ -4821,7 +4821,7 @@
The name of a printed manual from a different Texinfo file.
@end enumerate
-The template for a full five argument cross reference looks like
+The template for a full five argument cross-reference looks like
this:
@example
@@ -4863,10 +4863,10 @@
@noindent instead of
@w{`See Hurricanes, page @var{ppp}, --- for the details'}.
-Cross references with one, two, three, four, and five arguments are
+Cross-references with one, two, three, four, and five arguments are
described separately following the description of @code{@@xref}.
address@hidden warns when the text of a cross reference (and node
address@hidden warns when the text of a cross-reference (and node
names and menu items) contains a problematic construct that will
interfere with its parsing in Info. If you don't want to see the
warnings, you can set the customization variable
@@ -4879,7 +4879,7 @@
@address@hidden old name
@findex xref
address@hidden Cross references using @code{@@xref}
address@hidden Cross-references using @code{@@xref}
@cindex References using @code{@@xref}
The @code{@@xref} command generates a cross-reference for the
@@ -4894,7 +4894,7 @@
@node One Argument
@subsection @code{@@xref} with One Argument
address@hidden One-argument form of cross references
address@hidden One-argument form of cross-references
The simplest form of @code{@@xref} takes one argument, the name of
another node in the same Texinfo file.
@@ -4927,7 +4927,7 @@
@node Two Arguments
@subsection @code{@@xref} with Two Arguments
address@hidden Two-argument form of cross references
address@hidden Two-argument form of cross-references
With two arguments, the second is used as a label for the online output.
@@ -4964,7 +4964,7 @@
@noindent
in a printed manual, where the node name is printed.
-The second argument to cross references must observe some of the
+The second argument to cross-references must observe some of the
restrictions for node names (@pxref{Node Line Requirements}). The
most common issue is that colons cannot be used, since that interferes
with the parsing of the Info file.
@@ -4972,7 +4972,7 @@
@node Three Arguments
@subsection @code{@@xref} with Three Arguments
address@hidden Three-argument form of cross references
address@hidden Three-argument form of cross-references
A third argument replaces the node name in the @TeX{} output. The third
argument should be the name of the section in the printed output, or
@@ -5044,19 +5044,19 @@
@noindent
in a printed manual.
-The third argument to cross references must observe some of the
+The third argument to cross-references must observe some of the
restrictions for node names (@pxref{Node Line Requirements}). The
most common issue is that colons cannot be used, since that interferes
with the parsing of the Info file.
-As a practical matter, it is often best to write cross references with
+As a practical matter, it is often best to write cross-references with
just the first argument if the node name and the section title are the
same (or nearly so), and with the first and third arguments only if the
node name and title are different.
@findex xrefautomaticsectiontitle
Texinfo offers a setting to use the section title instead of node
-names by default in cross references (an explicitly specified third
+names by default in cross-references (an explicitly specified third
argument still takes precedence):
@example
@@ -5072,9 +5072,9 @@
@node Four and Five Arguments
@subsection @code{@@xref} with Four and Five Arguments
address@hidden Four- and five argument forms of cross references
address@hidden Four- and five argument forms of cross-references
-In a cross reference, a fourth argument specifies the name of another
+In a cross-reference, a fourth argument specifies the name of another
Info file, different from the file in which the reference appears, and
a fifth argument specifies its title as a printed manual.
@@ -5124,7 +5124,7 @@
Next case: often, you will leave out the second argument when you use
the long version of @code{@@xref}. In this case, the third argument,
-the topic description, will be used as the cross reference name in
+the topic description, will be used as the cross-reference name in
Info. For example,
@example
@@ -5198,12 +5198,12 @@
@cindex Referring to an entire manual
@anchor{Top Node Naming} @c old name
-Ordinarily, you must always name a node in a cross reference.
+Ordinarily, you must always name a node in a cross-reference.
However, it's not unusual to want to refer to another manual as a
whole, rather than a particular section within it. In this case,
giving any section name is an unnecessary distraction.
-So, with cross references to other manuals (@pxref{Four and Five
+So, with cross-references to other manuals (@pxref{Four and Five
Arguments}), if the first argument is either @samp{Top} (capitalized
just that way) or omitted entirely, and the third argument is omitted,
the printed output includes no node or section name. (The Info output
@@ -5234,7 +5234,7 @@
It's also possible (and is historical practice) to refer to a whole
manual by specifying the `Top' node and an appropriate entry for the
third argument to the @code{@@xref} command. Using this idiom, to
-make a cross reference to @cite{The GNU Make Manual}, you would write:
+make a cross-reference to @cite{The GNU Make Manual}, you would write:
@example
@@address@hidden,, Overview, make, The GNU Make address@hidden
@@ -5262,7 +5262,7 @@
is no widely-used convention for naming the first section in a printed
manual, this is just what the Make manual happens to use. This
arbitrariness of the first name is a principal reason why omitting the
-third argument in whole-manual cross references is preferable.
+third argument in whole-manual cross-references is preferable.
@node @code{@@ref}
@@ -5270,7 +5270,7 @@
@address@hidden old name
@findex ref
address@hidden Cross references using @code{@@ref}
address@hidden Cross-references using @code{@@ref}
@cindex References using @code{@@ref}
@code{@@ref} is nearly the same as @code{@@xref} except that it does
@@ -5329,7 +5329,7 @@
@address@hidden old name
@findex pxref
address@hidden Cross references using @code{@@pxref}
address@hidden Cross-references using @code{@@pxref}
@cindex References using @code{@@pxref}
The parenthetical reference command, @code{@@pxref}, is nearly the
@@ -5339,7 +5339,7 @@
lowercase `see' rather than an uppercase `See'.
@noindent
-With one argument, a parenthetical cross reference looks like this:
+With one argument, a parenthetical cross-reference looks like this:
@cindex Flooding
@example
@@ -5366,7 +5366,7 @@
@noindent
in a printed manual.
-With two arguments, a parenthetical cross reference has this template:
+With two arguments, a parenthetical cross-reference has this template:
@example
@dots{} (@@address@hidden@var{node-name}, @address@hidden) @dots{}
@@ -5415,13 +5415,13 @@
@node @code{@@anchor}
address@hidden @code{@@anchor}: Defining Arbitrary Cross Reference Targets
address@hidden @code{@@anchor}: Defining Arbitrary Cross-reference Targets
@address@hidden old name
@findex anchor
@cindex Anchors
address@hidden Cross reference targets, arbitrary
address@hidden Targets for cross references, arbitrary
address@hidden Cross-reference targets, arbitrary
address@hidden Targets for cross-references, arbitrary
An @dfn{anchor} is a position in your document, labelled so that
cross-references can refer to it, just as they can to nodes. You
@@ -5474,14 +5474,14 @@
@node @code{@@inforef}
address@hidden @code{@@inforef}: Cross References to Info-only Material
address@hidden @code{@@inforef}: Cross-references to Info-only Material
@address@hidden old name
@findex inforef
address@hidden Cross references using @code{@@inforef}
address@hidden Cross-references using @code{@@inforef}
@cindex References using @code{@@inforef}
address@hidden@@inforef} is used for making cross references to Info
address@hidden@@inforef} is used for making cross-references to Info
documents---even from a printed manual. This might be because you
want to refer to conditional @code{@@ifinfo} text
(@pxref{Conditionals}), or because printed output is not available
@@ -5496,7 +5496,7 @@
The node name.
@item
-The cross reference name (optional).
+The cross-reference name (optional).
@item
The Info file name.
@@ -5789,7 +5789,7 @@
companion Info file. The command produces italics in the printed
manual, and quotation marks in the Info file.
-If a book is written in Texinfo, it is better to use a cross reference
+If a book is written in Texinfo, it is better to use a cross-reference
command since a reader can easily follow such a reference in Info.
@address@hidden@@xref}}.
@@ -6271,7 +6271,7 @@
It is not reliable to use @code{@@verb} inside other Texinfo
constructs. In particular, it does not work to use @code{@@verb} in
-anything related to cross referencing, such as section titles or
+anything related to cross-referencing, such as section titles or
figure captions.
@@ -6738,7 +6738,7 @@
@quotation Caution
Do not use @code{@@strong} with the word @samp{Note} followed by a
-space; Info will mistake the combination for a cross reference. Use a
+space; Info will mistake the combination for a cross-reference. Use a
phrase such as @strong{Please notice} or @strong{Caution} instead, or
the optional argument to @code{@@address@hidden is allowable
there.
@@ -8430,10 +8430,10 @@
@item type
Specifies the sort of float this is; typically a word such as
``Figure'', ``Table'', etc. If this is not given, and @var{label} is,
-any cross referencing will simply use a bare number.
+any cross-referencing will simply use a bare number.
@item label
-Specifies a cross reference label for this float. If given, this
+Specifies a cross-reference label for this float. If given, this
float is automatically given a number, and will appear in any
@code{@@listoffloats} output (@address@hidden@@listoffloats}}). Cross
references to @var{label} are allowed.
@@ -8566,7 +8566,7 @@
HTML, each line is a link to the float. In printed output, the page
number is included.
-Unnumbered floats (those without cross reference labels) are omitted
+Unnumbered floats (those without cross-reference labels) are omitted
from the list of floats.
@@ -8850,7 +8850,7 @@
In Info, the reference mark for a footnote is a pair of parentheses
with the footnote number between them, like this: @samp{(1)}. The
-reference mark is followed by a cross reference link to the footnote
+reference mark is followed by a cross-reference link to the footnote
text if footnotes are put in separate nodes (@pxref{Footnote Styles}).
In the HTML output, footnote references are generally marked with a
@@ -8901,7 +8901,7 @@
node are placed in an automatically constructed node of
their own. In this style, a ``footnote reference'' follows
each @samp{(@var{n})} reference mark in the body of the
-node. The footnote reference is actually a cross reference
+node. The footnote reference is actually a cross-reference
which you use to reach the footnote node.
The name of the node with the footnotes is constructed
@@ -12689,7 +12689,7 @@
@cindex Document strings, translation of
For Info and other online output, this command changes the translation
-of various @dfn{document strings} such as ``see'' in cross references
+of various @dfn{document strings} such as ``see'' in cross-references
(@pxref{Cross References}), ``Function' in defuns (@pxref{Definition
Commands}), and so on. Some strings, such as ``Node:'', ``Next:'',
``Menu:'', etc., are keywords in Info output, so are not translated
@@ -14801,7 +14801,7 @@
In addition, the Info formatting commands have been extended to work
with the @code{@@include} command so as to create a single large Info
file that is split into smaller files if necessary. This means that
-you can write menus and cross references without naming the different
+you can write menus and cross-references without naming the different
Texinfo files.
@@ -15047,7 +15047,7 @@
@end example
@noindent @TeX{} will produce a @dfn{DVI file} as well as several auxiliary
-files containing information for indices, cross references, etc. The
+files containing information for indices, cross-references, etc. The
DVI file (for @dfn{DeVice Independent} file) can be printed on
virtually any device, perhaps after a further conversion (see the
previous section).
@@ -15102,7 +15102,7 @@
up-to-date index entries.
Finally, you may need to run @code{tex} one more time, to get the page
-numbers in the cross references correct.
+numbers in the cross-references correct.
To summarize, this is a five step process. (Alternatively, it's a
one-step process: run @code{texi2dvi}; see the previous section.)
@@ -15110,7 +15110,7 @@
@enumerate
@item
Run @code{tex} on your Texinfo file. This generates a DVI file (with
-undefined cross references and no indices), and the raw index files
+undefined cross-references and no indices), and the raw index files
(with two letter extensions).
@item
@@ -15119,8 +15119,8 @@
@item
Run @code{tex} again on your Texinfo file. This regenerates the DVI
-file, this time with indices and defined cross references, but with
-page numbers for the cross references from the previous run, generally
+file, this time with indices and defined cross-references, but with
+page numbers for the cross-references from the previous run, generally
incorrect.
@item
@@ -15128,7 +15128,7 @@
@item
Run @code{tex} one last time. This time the correct page numbers are
-written for the cross references.
+written for the cross-references.
@end enumerate
@menu
@@ -15149,7 +15149,7 @@
Sometimes you may wish to print a document while you know it is
incomplete, or to print just one chapter of a document. In such a
case, the usual auxiliary files that @TeX{} creates and warnings
address@hidden gives about undefined cross references are just nuisances. You
address@hidden gives about undefined cross-references are just nuisances. You
can avoid them with the @code{@@novalidate} command, which you must
give @emph{before} any sectioning or cross-reference commands.
@@ -16356,7 +16356,7 @@
Suppress the pointer-validation phase of @code{makeinfo}---a dangerous
thing to do. This can also be done with the @code{@@novalidate}
command (@pxref{Use @TeX{}}). Normally, consistency checks are made
-to ensure that cross references can be resolved, etc. @xref{Pointer
+to ensure that cross-references can be resolved, etc. @xref{Pointer
Validation}.
@item --no-warn
@@ -16940,7 +16940,7 @@
@item CHECK_HTMLXREF
For address@hidden Check that manuals which are the target of external
-cross references (@pxref{Four and Five Arguments}) are present in
+cross-references (@pxref{Four and Five Arguments}) are present in
@file{htmlxref.cnf} (@pxref{HTML Xref Configuration}); default false.
@item COMPLEX_FORMAT_IN_TABLE
@@ -16971,7 +16971,7 @@
@item EXTERNAL_DIR
For address@hidden Base directory for external manuals; default none. It is
-better to use the general external cross reference mechanism
+better to use the general external cross-reference mechanism
(@pxref{HTML Xref Configuration}) than this variable.
@item EXTRA_HEAD
@@ -17117,7 +17117,7 @@
is set; default is @code{index}.
@item TOP_NODE_FILE_TARGET
-For address@hidden File name used for the Top node in cross references;
+For address@hidden File name used for the Top node in cross-references;
default is @code{index}.
@item TOP_NODE_UP_URL
@@ -17131,7 +17131,7 @@
@item USE_ACCESSKEY
@cindex @code{accesskey}, customization variable for
-For address@hidden Use @code{accesskey} in cross references; default true.
+For address@hidden Use @code{accesskey} in cross-references; default true.
@item USE_ISO
For address@hidden Use entities for doubled single-quote characters
@@ -17145,7 +17145,7 @@
output; default true.
@item USE_REL_REV
-For address@hidden Use @code{rel} in cross references; default true.
+For address@hidden Use @code{rel} in cross-references; default true.
@item VERTICAL_HEAD_NAVIGATION
For address@hidden If set, a vertical navigation panel is used; default false.
@@ -17159,14 +17159,14 @@
default is 300.
@item XREF_USE_FLOAT_LABEL
-For address@hidden If set, for the float name in cross references, use the
+For address@hidden If set, for the float name in cross-references, use the
float label instead of the type followed by the float number
(@address@hidden@@float}}). The default is off.
@item XREF_USE_NODE_NAME_ARG
-For address@hidden Only relevant for cross reference commands with no cross
+For address@hidden Only relevant for cross-reference commands with no cross
reference name (second argument). If set address@hidden, use the node name
-(first) argument in cross reference @@-commands for the text displayed
+(first) argument in cross-reference @@-commands for the text displayed
as the hyperlink. If set address@hidden, use the node name if
@code{USE_NODES} is set, otherwise the section name. If set to
@samp{undef}, use the first argument in preformatted environments,
@@ -17226,7 +17226,7 @@
prefer the entity. Set by default for HTML, but not XML.
@item EXTERNAL_CROSSREF_SPLIT
-For cross references to other manuals, this determines if the other
+For cross-references to other manuals, this determines if the other
manual is considered to be split or monolithic. By default, it is set
based on the value of @code{SPLIT}. @xref{HTML Xref}, and @pxref{HTML
Xref Configuration}.
@@ -17278,7 +17278,7 @@
@item INFO_SPECIAL_CHARS_WARNING
If set, warn about problematic constructs for Info output (such as the
-string @samp{::}) in node names, menu items, and cross references;
+string @samp{::}) in node names, menu items, and cross-references;
default true. Do not warn about index entries, since parsing problems
there don't prevent navigation; readers can still relatively easily
find their way to the node in question.
@@ -17352,7 +17352,7 @@
otherwise specified. @address@hidden@@documentencoding}}.
@item OVERVIEW_LINK_TO_TOC
-If set, the cross references in the Overview link to the corresponding
+If set, the cross-references in the Overview link to the corresponding
Table of Contents entries; default true.
@item PACKAGE
@@ -17515,7 +17515,7 @@
@item USE_NODE_TARGET
If set, use the node associated with a section for the section target
-in cross references; default true.
+in cross-references; default true.
@item USE_NUMERIC_ENTITY
For HTML and address@hidden If set, use numeric entities instead of ASCII
@@ -17555,7 +17555,7 @@
@vindex documentlanguage @r{customization variable}
@command{texi2any} writes fixed strings into the output document at
-various places: cross references, page footers, the help page,
+various places: cross-references, page footers, the help page,
alternate text for images, and so on. The string chosen depends on
the value of the @code{documentlanguage} at the time of the string
being output (@address@hidden@@documentlanguage}}, for the Texinfo
@@ -17907,7 +17907,7 @@
@end example
@noindent
address@hidden Writing these three cross references using xref results in
address@hidden Writing these three cross-references using xref results in
@c three references to the same named manual, which looks strange.
@iftex
For more information, see @address@hidden Options}, as well as
@@ -18657,7 +18657,7 @@
* HTML Translation:: Details of the HTML output.
* HTML Splitting:: How HTML output is split.
* HTML CSS:: Influencing HTML output with Cascading Style Sheets.
-* HTML Xref:: Cross references in HTML output.
+* HTML Xref:: Cross-references in HTML output.
@end menu
@@ -18782,7 +18782,7 @@
the file names are constructed after the name of the node associated
with the relevant sectioning command. Also, unless
@option{--no-node-files} is specified, a redirection file is output
-for every node in order to more reliably support cross references to
+for every node in order to more reliably support cross-references to
that manual (@pxref{HTML Xref}).
When splitting, the HTML output files are written into a subdirectory,
@@ -18923,11 +18923,11 @@
@node HTML Xref
address@hidden HTML Cross References
address@hidden HTML cross references
address@hidden Cross references, in HTML output
address@hidden HTML Cross-references
address@hidden HTML cross-references
address@hidden Cross-references, in HTML output
-Cross references between Texinfo manuals in HTML format become, in the
+Cross-references between Texinfo manuals in HTML format become, in the
end, a standard HTML @code{<a>} link, but the details are
unfortunately complex. This section describes the algorithm used in
detail, so that Texinfo can cooperate with other programs, such as
@@ -18957,8 +18957,8 @@
@node HTML Xref Link Basics
address@hidden HTML Cross Reference Link Basics
address@hidden HTML cross reference link basics
address@hidden HTML Cross-reference Link Basics
address@hidden HTML cross-reference link basics
For our purposes, an HTML link consists of four components: a host
name, a directory part, a file part, and a target part. We
@@ -18969,7 +18969,7 @@
@end example
The information to construct a link comes from the node name and
-manual name in the cross reference command in the Texinfo source
+manual name in the cross-reference command in the Texinfo source
(@pxref{Cross References}), and from @dfn{external information}
(@pxref{HTML Xref Configuration}).
@@ -18981,7 +18981,7 @@
The @var{dir} and @var{file} parts are more complicated, and depend on
the relative split/mono nature of both the manual being processed and
-the manual that the cross reference refers to. The underlying idea is
+the manual that the cross-reference refers to. The underlying idea is
that there is one directory for Texinfo manuals in HTML, and a given
@var{manual} is either available as a monolithic file
@address@hidden, or a split subdirectory
@@ -19041,10 +19041,10 @@
@node HTML Xref Node Name Expansion
address@hidden HTML Cross Reference Node Name Expansion
address@hidden HTML cross reference node name expansion
address@hidden node name expansion, in HTML cross references
address@hidden expansion, of node names in HTML cross references
address@hidden HTML Cross-reference Node Name Expansion
address@hidden HTML cross-reference node name expansion
address@hidden node name expansion, in HTML cross-references
address@hidden expansion, of node names in HTML cross-references
As mentioned in the previous section, the key part of the HTML cross
reference algorithm is the conversion of node names in the Texinfo
@@ -19054,7 +19054,7 @@
(Although HTML anchors can contain most characters, XHTML is more
restrictive.)
-Cross references in Texinfo can refer either to nodes or anchors
+Cross-references in Texinfo can refer either to nodes or anchors
(@address@hidden@@anchor}}). However, anchors are treated identically
to nodes in this context, so we'll continue to say ``node'' names for
simplicity.
@@ -19129,8 +19129,8 @@
@node HTML Xref Command Expansion
address@hidden HTML Cross Reference Command Expansion
address@hidden HTML cross reference command expansion
address@hidden HTML Cross-reference Command Expansion
address@hidden HTML cross-reference command expansion
Node names may contain @@-commands (@pxref{Node Line Requirements}).
This section describes how they are handled.
@@ -19220,11 +19220,11 @@
@node HTML Xref 8-bit Character Expansion
address@hidden HTML Cross Reference 8-bit Character Expansion
address@hidden HTML cross reference 8-bit character expansion
address@hidden 8-bit characters, in HTML cross references
address@hidden Expansion of 8-bit characters in HTML cross references
address@hidden Transliteration of 8-bit characters in HTML cross references
address@hidden HTML Cross-reference 8-bit Character Expansion
address@hidden HTML cross-reference 8-bit character expansion
address@hidden 8-bit characters, in HTML cross-references
address@hidden Expansion of 8-bit characters in HTML cross-references
address@hidden Transliteration of 8-bit characters in HTML cross-references
Usually, characters other than plain 7-bit ASCII are transformed into
the corresponding Unicode code point(s) in Normalization address@hidden,
@@ -19276,9 +19276,9 @@
@node HTML Xref Mismatch
address@hidden HTML Cross Reference Mismatch
address@hidden HTML cross reference mismatch
address@hidden Mismatched HTML cross reference source and target
address@hidden HTML Cross-reference Mismatch
address@hidden HTML cross-reference mismatch
address@hidden Mismatched HTML cross-reference source and target
As mentioned earlier (@pxref{HTML Xref Link Basics}), the generating
software may need to guess whether a given manual being cross
@@ -19319,20 +19319,20 @@
Once again, this is something the software which generated the
@emph{referent} manual has to do in advance, it's not something the
-software generating the cross reference in the present manual can
+software generating the cross-reference in the present manual can
control.
@node HTML Xref Configuration
address@hidden HTML Cross Reference Configuration: @file{htmlxref.cnf}
address@hidden HTML Cross-reference Configuration: @file{htmlxref.cnf}
@pindex htmlxref.cnf
address@hidden HTML cross reference configuration
address@hidden Cross reference configuration, for HTML
address@hidden HTML cross-reference configuration
address@hidden Cross-reference configuration, for HTML
@cindex Configuration, for HTML cross-manual references
@command{makeinfo} reads a file named @file{htmlxref.cnf} to gather
-information for cross references to other manuals in HTML output. It
+information for cross-references to other manuals in HTML output. It
is looked for in the following directories:
@table @file
@@ -19401,17 +19401,17 @@
hello node address@hidden@}/hello/manual/html_node/
@end smallexample
address@hidden monolithic manuals, for HTML cross references
address@hidden monolithic manuals, for HTML cross-references
If the keyword is @code{mono}, @var{urlprefix} gives the host,
directory, and file name for @var{manual} as one monolithic file.
address@hidden split manuals, for HTML cross references
address@hidden split manuals, for HTML cross-references
If the keyword is @code{node}, @code{section}, or @code{chapter},
@var{urlprefix} gives the host and directory for @var{manual} split
into nodes, sections, or chapters, respectively.
When available, @command{makeinfo} will use the ``corresponding''
-value for cross references between manuals. That is, when generating
+value for cross-references between manuals. That is, when generating
monolithic output (@option{--no-split}), the @code{mono} url will be
used, when generating output that is split by node, the @code{node}
url will be used, etc. However, if a manual is not available in that
@@ -19425,7 +19425,7 @@
mono @result{} mono, chapter, section, node
@end smallexample
address@hidden address@hidden, and HTML cross references}
address@hidden address@hidden, and HTML cross-references}
These section- and chapter-level cross-manual references can succeed
only when the target manual was created using @option{--node-files};
this is the default for split output.
@@ -19437,11 +19437,11 @@
@node HTML Xref Link Preservation
address@hidden HTML Cross Reference Link Preservation: @address@hidden
address@hidden HTML Cross-reference Link Preservation: @address@hidden
@pindex noderename.cnf
@pindex @var{manual}-noderename.cnf
address@hidden HTML cross reference link preservation
address@hidden HTML cross-reference link preservation
@cindex Preserving HTML links to old nodes
@cindex Old nodes, preserving links to
@cindex Renaming nodes, and preserving links
@@ -19688,7 +19688,7 @@
@address@hidden@@allowcodebreaks}}.
@item @@address@hidden@address@hidden
-Define @var{name} as the current location for use as a cross reference
+Define @var{name} as the current location for use as a cross-reference
target. @address@hidden@@anchor}}.
@item @@appendix @var{title}
@@ -20277,7 +20277,7 @@
Web. @address@hidden@@indicateurl}}.
@item @@address@hidden@var{node-name}, address@hidden, @address@hidden
-Make a cross reference to an Info file for which there is no printed
+Make a cross-reference to an Info file for which there is no printed
manual. @address@hidden@@inforef}}.
@item @@address@hidden@var{fmt}, @address@hidden
@@ -20809,7 +20809,7 @@
@item @@address@hidden@var{url}[, @var{displayed-text}][, @address@hidden
@itemx @@address@hidden@var{url}[, @var{displayed-text}][, @address@hidden
-Define a cross reference to an external uniform resource locator,
+Define a cross-reference to an external uniform resource locator,
e.g., for the World Wide Web. @address@hidden@@url}}.
@item @@urefbreakstyle @var{style}
@@ -20921,7 +20921,7 @@
In addition to the above, remaining commands (@code{@@node},
@code{@@anchor}, @code{@@printindex}, @code{@@ref}, @code{@@math},
@code{@@cindex}, @code{@@url}, @code{@@image}, and so on) cannot
-contain cross reference commands (@code{@@ref}, @code{@@xref},
+contain cross-reference commands (@code{@@ref}, @code{@@xref},
@code{@@pxref} and @code{@@inforef}). In one last addition,
@code{@@shortcaption} may only appear inside @code{@@float}.
@@ -22064,7 +22064,7 @@
files since they do not refer to nodes within the current buffer. This
is a deficiency. Rather than use menu entries, you can use cross
references to refer to other Info files. None of the updating commands
-affect cross references.
+affect cross-references.
Texinfo mode has five updating commands that are used most often: two
are for updating the node pointers or menu of a single node (or a
@@ -23081,7 +23081,8 @@
@end example
The @code{texinfo-format-region} command sometimes provides slightly
-odd error messages. For example, the following cross reference fails to
format:
+odd error messages. For example, the following cross-reference fails
+to format:
@example
(@@address@hidden Mistakes, for more info.)
@@ -23125,7 +23126,7 @@
@noindent
This is because Info perceives the example of the error as the first
-cross reference in this node and if you type a @key{RET} immediately
+cross-reference in this node and if you type a @key{RET} immediately
after typing the Info @kbd{f} command, Info will attempt to go to the
referenced node. If you type @kbd{f catch @key{TAB} @key{RET}}, Info
will complete the node name of the correctly written example and take
@@ -23161,7 +23162,7 @@
@end example
@noindent
-(The cross reference lacks a closing brace.)
+(The cross-reference lacks a closing brace.)
@TeX{} produced the following output, after which it stopped:
@example
@@ -23455,7 +23456,7 @@
This is because every `Next' pointer should be matched by a
`Previous' (in the node where the `Next' points) which points back.
address@hidden also checks that all menu entries and cross references
address@hidden also checks that all menu entries and cross-references
point to actual nodes.
@code{Info-validate} requires a tag table and does not work with files
@@ -24031,11 +24032,11 @@
@node Info Format Cross Reference
address@hidden Info Format: Cross Reference
address@hidden Info Format: Cross-reference
address@hidden Cross references, in Info format
address@hidden Cross-references, in Info format
-A general cross reference in Info format has one of the following two forms:
+A general cross-reference in Info format has one of the following two forms:
@example
<cross-reference> =
@@ -24097,7 +24098,7 @@
belonging to the sentence, not part of the reference.
The third example refers to the node `Top' in another manual, namely
address@hidden, with `Overview' being the label for this cross reference.
address@hidden, with `Overview' being the label for this cross-reference.
The fourth example shows a colon character being quoted in a label,
and the fifth example shows a period being quoted in a node name.
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [6987] hyphenate "cross-reference",
Gavin D. Smith <=