[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[therion-users] cross-sections
From: |
Martin Sluka |
Subject: |
[therion-users] cross-sections |
Date: |
Wed, 30 Jul 2003 10:01:13 +0200 |
Stacho,
we discussed the drawing of cross-sections with MartinB. It looks you
should add to therion section-endsection command. Recent method to draw
sections is a bit overcomplicated. There is not any relationship
between section and section line for example. Sections are not usable
for 3D now.
section \
-bearing xx \
-slope yy \
-visibility on/off (manual or automatic) \
-anchor (inside passage - the point which belongs to real section) xy \
-reference_point (where to draw section) \
-standard_shape (for visibility off - not drawn on maps, but important
for 3D) \
-
[data] (in case of nonstandard shape - real section)
endsection
Therion should draw only "possible" sections - on 2D map only sections
connected to subhorizontal not the vertical passages, ...
There should be a validity check - if section corresponds to passage
dimensions and height symbol for example, bearing too far from
perpendicular orientation, ...
The section line, orientation mark, connection line, etc. should be
generated by therion itself.
xtherion should have separate window for editation of real
cross-sections and editable library of standard shapes.
Any ideas from others?
MartinS
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [therion-users] cross-sections,
Martin Sluka <=