[Uisp-dev] [Bug #1745] VTarget and ARef programming or reading with STK500 is wrong

[nobody]

=================== BUG #1745: LATEST MODIFICATIONS ==================
http://savannah.nongnu.org/bugs/?func=detailbug&bug_id=1745&group_id=2117

Changes by: Theodore A. Roth <address@hidden>
Date: Thu 03/13/03 at 09:51 (US/Pacific)

            What     | Removed                   | Added
---------------------------------------------------------------------------
          Resolution | None                      | Wont Fix
         Assigned to | None                      | troth
    Originator Email |                           | unknown
              Status | Open                      | Closed


------------------ Additional Follow-up Comments ----------------------------
This can't be fixed. It is a problem with the firmware in the stk500 as far as 
I can tell. I think that the algorithm used to determine the voltage using the 
ADC in the 8535 is the culprit.



=================== BUG #1745: FULL BUG SNAPSHOT ===================


Submitted by: None                    Project: AVR In-System Programmer     
Submitted on: Mon 11/18/02 at 12:54
Category:  None                       Severity:  5 - Major                  
Bug Group:  None                      Resolution:  Wont Fix                 
Assigned to:  troth                   Originator Email:  unknown            
Status:  Closed                       

Summary:  VTarget and ARef programming or reading with STK500 is wrong

Original Submission:  $ uisp  -dprog=stk500 -dpart=AT90S8535 -mode=s --waref=5.0
Atmel AVR AT90S8535 is found.

$ uisp  -dprog=stk500 -dpart=AT90S8535 -mode=s --raref
Atmel AVR AT90S8535 is found.
ARef is set to 5.1 V

Setting aref or vtar to 5.0V gives 5.1V when reading. There is always 0.1V 
difference between writing and reading.

Follow-up Comments
*******************

-------------------------------------------------------
Date: Thu 03/13/03 at 09:51         By: troth
This can't be fixed. It is a problem with the firmware in the stk500 as far as 
I can tell. I think that the algorithm used to determine the voltage using the 
ADC in the 8535 is the culprit.


CC list is empty


No files currently attached


For detailed info, follow this link:
http://savannah.nongnu.org/bugs/?func=detailbug&bug_id=1745&group_id=2117