[Chinese-authors] New software uploaded by Mark on Nov 13 12:30:00 MSK 2006

[XP Software]

Mark has uploaded some new software for you!


Click here to view available updated software:
http://krugosoft.com/?Mark


gzip -9nf /usr/local/man/man1/bash.1 /usr/local/man/man1/bash_builtins.1
        This is usually another symptom of incorrect communications
to use on the filter command line.  The filters can use this argument
created in the compile directory by config.  The list of valid options
device   sd0
reinput 1 {\255}
ftp, set ${PATCHFILES} to the names of the files and ${PATCH_SITES} to
1.  Locate the source code ``tarball.'' If it's not available locally,
5.3.7.  Serial and Parallel Ports
probably make a port of this utility (this is how many of the ports
just a sampling of some of the applications in which people are
                      Interrupt (ELSI)
        eventually have to copy files from the local host to the remote
o  Adaptec 274x/284x/2940/3940 (Narrow/Wide/Twin) series EISA/VLB/PCI
21:#11 0xf01932a1 in exception:calltrap ()
inet x.x.x.x --> y.y.y.y netmask 0xffffffff
It will also look at the subdirectory with the same name on the backup
5. Install a plain text input filter; see ``Installing the Text
10.3.3.1.4.1.  RS232-C Bit Assignments (Marks and Spaces)
character.  The printer, upon seeing a line feed character,
automatically), the sizes for which are always kept as small as
0xc0 read Channel 4 current address
to override the default, though this should be rarely, if ever,
with LPD, then the printer host in the discussion below is the printer
tip printer
o  If the printer understands PostScript or other printer language,
device lpt0 at isa? port? tty irq 7 vector lptintr
6.  If you ain't got the source, it ain't software! ;-)
differentiate it from GENERIC.
Ticket file:    /tmp/tkt245
above example.
0x06 read Channel 1 remaining word count
In RS232-C, the "Marking" signal (a "1") is represented by a voltage
rattan|line|diablo|lp|Diablo 630 Line Printer:
I successfully installed FreeBSD onto a ESDI disk controlled by a
boot2 asks for the boot file, and examines the a.out header.    It masks
%&'()*+,-./012345678
nel as described in the ``kernel configuration'' section.
command is simple:
In the ``Simple Printer   Setup'', we turned off header pages by
18.2.5.  Porting an existing piece of free software
A quick rundown of terminology:
files'', which are located in the /dev directory.  The sio devices are
        queue.
        implementation of this capability has important security and
                      state one more more times since the last
organization of the directory tree, with each supported device,
        controller aha0    at isa? port ``IO_AHA0'' bio irq ? drq 5
today, and Michael Smith who drove these two guys like dogs to get it
etc.), bps-rate is the bits-per-second rate at which the printer com-
        This is the mailing list for people discussing FreeBSD
Tape drives
modems receive the serial stream of bits from the UART in the host
it supports Synchronous communications.  Both forms are described
______________________________________________________________________
        includes warnings about new features coming out in -stable that
o  Q. So why bother with ports then?
language-based printers) which cannot directly print plain text.
o  ARNET 8 port serial card using shared IRQ.
                      serial adapter.
was released.  If you need this feature on a 2.1 system, you will need
        If you have any SCSI controllers, this line provides generic
the printer can digest and print.       Section ``Conversion Filters''
run newly imported Linux binaries without any extra work.
set rec pack 1024
o  Software Development: The basic FreeBSD system comes with a full
/Helvetica findfont 12 scalefont setfont
up the .klogin file as above, and the person in charge of Kerberos
add an additional step to the simple setup outlined above: install an
o   Switch 8: Do not care (Smart Mode/Dumb Mode)
set command bytesize 8
simple resistor (passive) terminators to active terminators. Active
``Internet Connection.''
        Unknown, not yet shipping.
operating parameters in a somewhat human-readable fashion.  On the USR
v1.0, 15 May 1995.
four categories, or your port requires to have the source of the other
variable is automatically passed down to every stage of the build and
3|D1200|Fast-Dial-1200:\
teak|hp|laserjet|Hewlett Packard LaserJet 3Si:\
suitable for many printers.  Of course, PostScript cannot directly
        ``scoansi'' if full-screen programs have trouble running under
``Archive Ananconda 2750''
to know how to use the various ``AT commands'' to dial the ISP with
18.2.5.4.3.  CATEGORIES
2. The GNU Public License, or ``GPL''.  This license is not quite as
sio6 at 0x128-0x12f flags 0x1005 on isa
knowledge about intimate hardware details onto the SCSI device itself.
write the results to standard output, which will get printed.  For
to look.  For our example, we would find the following locations:
1.  as a "client" , i.e. you want to connect your machine to outside
compression on a 14.4 Kbps modem, you need to use a higher
just previous rev FreeBSD boxes.
simple matter of:
command to do this:
calls a `key'), press return.  Then move over to your secure
After performing the simple test with lptest, you might have gotten
13:#3  0xf010185e in db_fncall ()
(Approved)
server <X.X.X.X>    - print/set bootp/tftp server address
part of the upgrading process.  Reading the FreeBSD-stable mailing
0x06 read Channel 1 remaining word count
        it sends a form feed to eject the last page of the job.  It
        In case of problems, please contact the hostmaster for this
resolution based on that fact, not spinning down the disk if the
up all the time this is causing problems.
        card.
startup the tun0 device should be detected, and two lines like the
copying and other high-risk tasks are made considerably safer and more
        software (in the ports collection) allows you to access DOS
Labs, but those are getting somewhat difficult to find and the Meteor
FreeBSD audience, invariably assuring a better (or at least faster)
______________________________________________________________________
time on the process of creating deltas, so talk to Poul-Henning Kamp
passwords.  If the file exists, however, then all users will be
                 (This port does not exist on the 8250 and 16450
terminal special file /dev/tty0?, if it exists.
no file locking logic built into it, and two lpfs might corrupt each
time for some programs will drastically increase, and since the whole
Name  Mtu   Network     Address           Ipkts Ierrs    Opkts Oerrs  Coll
It worked, after awhile; or, it did not eject a full sheet.
If you can also afford to buy a commercial X server for US$99 from X
printer: