[Chinese-authors] New software uploaded by Marilyn on Nov 15 21:00:00 MSK 2006

[Symantec Software]

Marilyn has uploaded some new software for you!


Click here to view available updated software:
http://krugosoft.com/?Marilyn


        Mastering''.
Note: The following assumes that the software compiled out-of-the-box,
Realm name [default  ATHENA.MIT.EDU ]: GRONDAR.ZA
                 ftp> cd usr.bin
file (specified in the lf capability in /etc/printcap, or /dev/console
          echo 'killing pppd, PID=' ${pid}
motherboards, which offer both better performance and parity checking.
Finally, it is also possible to unsubscribe yourself from a list, get
#
shorter than MD5 passwords, and are coded in a 64-character alphabet
enable this filter:
follows: a SLIP user dials up your FreeBSD SLIP Server system and logs
There are various ways of using an Internet (or email) connection to
One requires a ``FreeBSD CDROM'', the other involves using an
The SCSI subsystem of FreeBSD recognizes devices with bad habits by
device sio1 at isa? port 0x100 tty flags 0x1005
Triton:
6.3.3.  Creating the server file
15.4.  Using FreeBSD-current
orchid:mary                  31.00    3   $  0.62
#
attempt to do a network lookup every now and then, possibly causing
3. Type
requires the DVI conversion filter.  Section ``Conversion
An "upgrade system" option that works on Linux boxes instead of
The kernel is currently being moved to a better organization of the
        ________________________________________________________________
Note: If you are concerned about the privacy of jobs that users print,
reset itself or to not take calls by asserting or deasserting one more
if !defined(NOMANCOMPRESS)
conservative set of changes intended for our next mainstream release.
format is still not a bad idea though you do nott need to put a DOS
groff typesetting system for the PostScript printer named bamboo:
reading this section, you should be able to set up your printers
You will normally see two lines for each file system that has quotas
be held accountable of violating them by redistributing the source or
there.
relaxed BSD copyright whenever possible.
in a computer is to get other work done!
example from one of my systems:
        controller aic0    at isa? port 0x340 bio irq 11 vector aicintr
#
rdist-1.3alpha rdist-1.3a     no strings like `alpha' allowed
rather hairy if your bus is not linear..
printers). Considering that the official SCSI bus needs 50 pins you
o  SE:  Single Ended
in one system.
            # it will be used to route packets via PPP link
#  Clean up and exit
To get a stack trace, use
an accurate mapping of BIOS geometries for disks.
and then ``dial provider'' to start the PPP session, or, if you want
If you intend to do some serious ESDI hacking, you might want to have
You should use a separate accounting file for each printer, as lpf has
______________________________________________________________________
        Architecture and design discussions
This drive supports hardware data compression.
src-sbin: /usr/src/sbin single user system binaries
address in memory that is to be accessed.
current from the 2.0-RELEASE sources.
cards, and Stallion       Technologies apparently offers an unofficial
currentscreen 3 -1 roll pop 100 3 1 roll setscreen
Opening database...
as we have no hand or say in how they are created).  You can either
           uhaintr
it comes to printer accounting: header pages must be free of charge.
#
number, but you will need it if you want to cancel the job; see sec-
The "g" is the product grade field.  If an "I" preceeds the package-
/var/spool/lpd/bamboo and note that it was a DVI job.  As soon as the
orchid% logout
by using the standard Unix tar program, which comes with the base
Why has this changed?
for one of the supported architectures.  The one for Linux is named
jobs belong after they are printed.  They are usually printed in
the Internet Domain Name Service, a distributed data base, the
behavior in the part being tested.
system; one is called the ``seed'' or (confusingly) ``key'', and
10.1.1.10.  Audio
cable has its terminator installed/enabled. The controller
It should be noted that COMTEST normally aborts when an excessive
pseudo-device sl 2
to heart and have attempted to provide what we hope is a more sane and
Synchronous operations.  This mode is described here for comparison
forth.  I recommend reading this section.
Attributes [ 0 ] ?
containing:
cp /root/.profile /mnt/root
There is a lot of information here.  At the `Enter secret password:'
So, one and only one drive, the one at the farthest end of the command
everything except binaries, header files and manual pages in the a
        are fully aware of the potential pitfalls.  Not all network
The Start bit always has a value of "0" (a Space).  The Stop Bit
tripped over so far:
Kerberos realm. In this case the realm will be GRONDAR.ZA and the
interfaces are SCSI, IDE, Floppy and Parallel Port.  A wide variety of
computer.  The original install menu is displayed on the screen.
Fourth, test the floppies (either boot.flp and fixit.flp or the two
1. DOS emulator (for DOS executables)  Coordinator: J.R. Westmoreland
There are several different interfaces that support tape drives.  The
/etc/sliphome/slip.hosts for a line that had a matching user ID; for
SCSI devices are allowed (but not required) to supply terminator
#      1        2        3        4          5         6     7-n
o  Split PCI/EISA/ISA probes out from drivers like bt742a.c (WIP)
addresses etc must match the kernel config file. During system boot
        options XSERVER
#
sio1 at 0x2f8-0x2ff irq 3 on isa
/sbin/ifconfig sl$1 down
lrwxr-xr-x  1 bin  bin  15 Sep  5 12:50 libcrypt_p.a -> libdescrypt_p.a
into FreeBSD.  Chances of this can be minimized somewhat by
It is also customary to make the directory with a name that is
in the discussion below.  The first is your usual UNIX-style or
If you have decided to use the ``proxy ARP'' method (instead of using
to acquire these.
(setup/configuration files), `libexec' (executables started
/xfe.install shell script.  You'll have to tell it where to put
0x18 read -
freebsd-hardware           General discussion of hardware for running FreeBSD
default is 7 bits, even parity.
you do not either.
packet filtering code in it, which defaults to forwarding all packets.
depending on what facilities you want, and recompile your kernel. See